Troubleshoot Security Cloud Integration Connectivity Issues on FMC

Available Languages

Download Options

  • PDF     (68.0 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (136.0 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (155.2 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:April 17, 2026
Document ID:225769

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Contents

Issue

Cisco Firewall Management Center (FMC) cannot establish connectivity to Cisco Security Cloud for integration.

Environment

  • Cisco Secure FMC for VMware (applicable to all models)

  • Software Version: 7.6.2.1 (applicable to all versions)

  • Network environment with upstream security controls/firewall policies

Resolution

To resolve the Cisco Security Cloud integration connectivity issue, follow these troubleshooting and resolution steps:

1: Test connectivity to the required Cisco Security Cloud URLs using these commands from the FMC as root user:

curl -v -k https://www.defenseorchestrator.com
nslookup www.defenseorchestrator.com
telnet www.defenseorchestrator.com 443
curl -v -k https://admin.sse.itd.cisco.com
nslookup admin.sse.itd.cisco.com
telnet admin.sse.itd.cisco.com 443
curl -v -k https://securex.us.security.cisco.com
nslookup securex.us.security.cisco.com
telnet securex.us.security.cisco.com 443
curl -v -k https://api-services.us.sse.itd.cisco.com
nslookup api-services.us.sse.itd.cisco.com
telnet api-services.us.sse.itd.cisco.com 443
curl -v -k https://api-sse.cisco.com
nslookup api-sse.cisco.com
telnet api-sse.cisco.com 443
curl -v -k https://registration.us.sse.itd.cisco.com
nslookup registration.us.sse.itd.cisco.com
telnet registration.us.sse.itd.cisco.com 443

2: If the connectivity tests show connection refusals or forbidden responses, update the upstream network security policies to allow FMC outbound HTTPS access to all required Cisco Security Cloud URLs for the us-east-1 region, if that is the region being used. Ensure these URLs are permitted over TCP port 443 from the FMC to the internet through any intermediate firewalls, proxies, or security controls.

Current Cloud Regioninline_image_0.png

  • defenseorchestrator.com

  • admin.sse.itd.cisco.com

  • securex.us.security.cisco.com

  • api-services.us.sse.itd.cisco.com

  • api-sse.cisco.com

  • registration.us.sse.itd.cisco.com

3: After updating the network security policies, retry the Cisco Security Cloud integration from the FMC interface and the curl/telnet commands. The integration now completes successfully with proper access to all required cloud endpoints.

Cause

The FMC could not reach the Cisco Security Cloud backend services because the required Cisco cloud URLs for the selected region (us-east-1) were not allowed through the network security controls, resulting in HTTPS connection failures during the integration process.

Related Content

Revision History

Revision Publish Date Comments
1.0
17-Apr-2026
Initial Release
TAC Authored

Contributed by Cisco Engineers

  • Echo Quiroz-Garcia
    Technical Consulting Engineer

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products