Remove Users from Secure Access Dashboard Provisioned Using Microsoft Azure

Available Languages

Download Options

  • PDF     (726.9 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (808.1 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (601.2 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 22, 2023
Document ID:221460

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

    Introduction

    This document describes how to remove users from Secure Access dashboard provisioned by Microsoft Azure.

    Prerequisites

    Requirements

    Cisco recommends that you have knowledge of these topics:

    • Secure Access
    • Microsoft Azure
    • User provisioning using Enterprise Applications in Azure

    Components Used

    The information in this document is based on these software and hardware versions:

    • Secure Access
    • Microsoft Azure

    The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, ensure that you understand the potential impact of any command.

    Configure

    1. Identify the users that need to be removed

     Identify the user which needs to be removed from the dashboard.

    • Navigate to Secure Access UI
    • Connect > Users and Groups
    • For this example, you are going to see how to remove user2

    Secure Access - User and User Groups

    2. Remove the desired users

    Navigate to the Azure portal

    • Enterprise Applications
    • Select your provisioning Enterprise Application
    • Users and Groups, then choose the users that you want to delete
    • Click Remove

    Azure - User and Groups (Remove Users)

    3. Stop and Start Provisioning

    After removing the desired users, navigate to Provisioning.

    Azure - Provisioning

    • Click on Stop Provisioning

    Azure - Stop Provisioning

    • Next, click on Start Provisioning

    Azure - Start Provisioning

    Now Verify that desired users have been removed from the Secure Access dashboard.

    Verify

    As you can see user2 has been removed from the Secure Access dashboard as desired.

    Secure Access - Users and Groups (User Removed)

    Verify from the logs on the Azure Portal

    Navigate to the Azure Portal.

    • Enterprise Applications
    • Select your provisioning Enterprise Application
    • Users and Groups
    • Click on View Provisioning logs

    Azure - View Provisioning Logs

    • The log indicates Action as Disable with Status as Success, which confirms the user removal from provisioning on the Secure Access target system

    Azure - Checking Provisioning Logs

    Azure - Checking Provisioning Logs

    Related Information

    Revision History

    Revision Publish Date Comments
    1.0
    21-Feb-2024
    Initial Release
    TAC Authored

    Contributed by Cisco Engineers

    • Sharjeel Makhdoomi
      TAC

    Was this Document Helpful?

    FeedbackFeedback

    Contact Cisco

    This Document Applies to These Products