Import the Chained Certificate onto the IEA/PostX Appliance

Available Languages

Download Options

  • PDF     (5.8 KB)
    View with Adobe Reader on a variety of devices
Updated:October 10, 2014
Document ID:118514

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This document describes how to import the chained certificate onto the IronPort Encryption Appliance (IEA)/PostX appliance.

Procedure

After you have chained the certificate, copy this chained certificate onto the IEA/PostX appliance:

  1. In the Administration GUI go to the 'Keys and Certificates' tab > SSL Setup and click the "Import CA Certificate" button.
  2. Fill in the host name and password like the original certificate request.
  3. Verify that the keystore field points to the same keystore file you used when you created the certificate request.
  4. Where it says Certificate, put the full UNIX path (e.g. /usr/local/postx/server_6.X.X.X/conf, where X.X.X is the version you are currently running/on) to the certificate you uploaded onto the appliance.
  5. Check the "Trust CA Certs" box and click the "Import Certificate" button.

Revision History

Revision Publish Date Comments
1.0
10-Oct-2014
Initial Release
TAC Authored

Contributed by Cisco Engineers

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products