Applicability
Splunk IT Service Intelligence 4.17.1
Description
- A Service has been created with the KPI to monitor the presence of data. The KPI should list the entities with the value for entities that don't have any data as "High", but instead, it reverts to "N/A" as shown below:

Investigation
- The concerned KPI is configured by utilizing the "fill data gaps with" custom value as "0", which is then mapped to be 'High' severity in the thresholding as shown below:

- Upon reviewing Splunk's official documentation, it became clear that the "Fill Data Gaps with" option's custom values aren't utilized for entity-level data gaps.
- As the current SPL was not capable of fetching the entities present and the "Fill Data Gaps with" option is not applicable, the only way is to tweak the SPL.
Resolution
- As a result of the above investigation, the SPL was tweaked. It now relies on the "itsi_entities" lookup to fetch the entity list and confirm if each entity has recent data within the last 5 minutes, aligning with the intended use case.

- The entities have the expected "High" severity in the absence of data now as shown below:

Splunk's official documentation
Revision History
| Revision |
Publish Date |
Comments |
1.0 |
30-Sep-2026
|
Initial Release |