After updating the Splunk instance from version 9.1.3 to 9.2.1, the web interface became inaccessible. Every time an attempted to log into the GUI, the following error message appeared:
The connection has timed out. An error occurred during a connection to IP:8000.
1. Verify HTTP Port (8000) status by executing the following command:
netstat -an | findstr :8000
*Ensure that the output indicates the HTTP port (8000) is listening and established.
2. Check SSL Configuration by executing the following command to review the SSL configuration in web.conf:
/opt/splunk/bin/splunk btool web list --debug | grep ssl
The result showed:
sslVersions = tls1.1, 1.2
According to the web.conf documentation:
sslVersions = <comma-separated list> * A comma-separated list of SSL versions to support. * The versions available are "ssl3", "tls1.0", "tls1.1", and "tls1.2"
The correct format should be "tls1.2" instead of "1.2"
Correct the SSL Configuration:
Edit the web.conf file to correct the SSL versions:
sslVersions = tls1.1, tls1.2
After making this change, restart Splunk to apply the new configuration.
Issue was caused by a typo in the sslVersions setting. The configuration was incorrectly set as "tls1.1, 1.2" instead of tls1.1, tls1.2". Correcting this typo resolved the problem, allowing access to the Splunk instance's web interface.
| Revision | Publish Date | Comments |
|---|---|---|
1.0 |
29-Sep-2026
|
Initial Release |