Cisco Security Advisory
Click Icon to Copy Verbose Score
CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:C/C:N/I:N/A:H/E:X/RL:X/RC:X
-
A vulnerability within the Endpoint Learning feature of Cisco Nexus 9000 Series Switches running in Application Centric Infrastructure (ACI) mode could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an endpoint device in certain circumstances.
The vulnerability is due to improper endpoint learning when packets are received on a specific port from outside the ACI fabric and destined to an endpoint located on a border leaf when Disable Remote Endpoint Learning has been enabled. This can result in a Remote (XR) entry being created for the impacted endpoint that will become stale if the endpoint migrates to a different port or leaf switch. This results in traffic not reaching the impacted endpoint until the Remote entry can be relearned by another mechanism.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
This advisory is available at the following link:
https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190828-nexus-aci-dos
-
Vulnerable Products
At the time of publication, this vulnerability affected Cisco Nexus 9000 Series Fabric Switches in ACI mode that were running Cisco NX-OS ACI Software releases earlier than 12.2(4M), 13.1(2u), or 13.2(1l).
See the Details section in the bug ID(s) at the top of this advisory for the most complete and current information.
Products Confirmed Not Vulnerable
Only products listed in the Vulnerable Products section of this advisory are known to be affected by this vulnerability.
Cisco has confirmed that this vulnerability does not affect the following Cisco products:
- Firepower 2100 Series
- Firepower 4100 Series
- Firepower 9300 Security Appliances
- MDS 9000 Series Multilayer Switches
- Nexus 1000 Virtual Edge for VMware vSphere
- Nexus 1000V Switch for Microsoft Hyper-V
- Nexus 1000V Switch for VMware vSphere
- Nexus 3000 Series Switches
- Nexus 3500 Platform Switches
- Nexus 3600 Platform Switches
- Nexus 5500 Platform Switches
- Nexus 5600 Platform Switches
- Nexus 6000 Series Switches
- Nexus 7000 Series Switches
- Nexus 7700 Series Switches
- Nexus 9000 Series Switches in standalone NX-OS mode
- Nexus 9500 R-Series Switching Platform
- UCS 6200 Series Fabric Interconnects
- UCS 6300 Series Fabric Interconnects
- UCS 6400 Series Fabric Interconnects
-
There are no workarounds that address this vulnerability.
-
When considering software upgrades, customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories and Alerts page, to determine exposure and a complete upgrade solution.
In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
Fixed Releases
At the time of publication, Cisco NX-OS ACI Software releases 12.2(4M) and later, 13.1(2u) and later, and 13.2(1l) and later contained the fix for this vulnerability.
See the Details section in the bug ID(s) at the top of this advisory for the most complete and current information.
Additional Resources
For help determining the best Cisco NX-OS Software release for a Cisco Nexus Switch, administrators can refer to the following Recommended Releases documents. If a security advisory recommends a later release, Cisco recommends following the advisory guidance.
For help determining the best Cisco NX-OS Software release for Cisco UCS, refer to the Recommended Releases documents in the release notes for the device.Cisco MDS Series Switches
Cisco Nexus 1000V for VMware Switch
Cisco Nexus 3000 Series and 3500 Series Switches
Cisco Nexus 5000 Series Switches
Cisco Nexus 5500 Platform Switches
Cisco Nexus 6000 Series Switches
Cisco Nexus 7000 Series Switches
Cisco Nexus 9000 Series Switches
Cisco Nexus 9000 Series ACI-Mode Switches
-
The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.
-
This vulnerability was found during the resolution of a Cisco TAC support case.
-
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
-
Show LessVersion Description Section Status Date 1.0 Initial public release. — Final 2019-August-28
-
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.