How to Configure Basic Reporting Permissions for an LDAP user in CUIC

Available Languages

Download Options

PDF (802.1 KB)
View with Adobe Reader on a variety of devices
ePub (894.8 KB)
View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle) (345.7 KB)
View on Kindle device or Kindle app on multiple devices

Updated:April 24, 2020

Document ID:215446

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This document describes how to configure permissions to a report in Cisco Unified Intelligence Center (CUIC) for a new LDAP user

Prerequisites

Requirements

Cisco recommends that you have knowledge of these topics:

CUIC Reporting
Lightweight Directory Access Protocol (LDAP)

Components Used

This document is not restricted to specific software and hardware versions.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, ensure that you understand the potential impact of any command.

Configure

Step 1. Configure a new user in Active Directory (AD) server that you want to use for reporting purposes.

Step 2. Log in to CUIC as the LDAP user.

Step 3. At first log in, you do not have correct permissions until those are granted by your CUIC Admin user. For reporting, you need to have the Report Designer role assigned to you.