How to Configure in Meeting Chat for CMS with Skype for Business

Available Languages

Download Options

  • PDF     (156.0 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (222.7 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (456.7 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:June 18, 2021
Document ID:217204

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This document describes the steps required to configure in Meeting Chat for Cisco Meeting Server (CMS) interoperability with Skype for Business.

Prerequisites

Requirements

Cisco recommends that you have knowledge of these topics:

  • CMS general configuration
  • CMS Application Programing Interface (API)

Components Used

The information in this document is based on CMS version 3.2.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, ensure that you understand the potential impact of any command.

Configuration

Step 1. Create a new CallProfile via API.

  1. Access CMS via Webadmin and navigate to Configuration/API/v1/CallProfile.
  2. Create a new  CallProfile and modify the next parameter as shown in the image:

chatAllowed: true

Note: The chatAllowed parameter has the next options available to be configured: true, false and unset.

Step 2. Assign the CallProfile to the space.

  1. Open the Webadmin and  navigate to Configuration/api/v1/coSpaces.
  2. Select the space required to assign the CallProfile created in Step 1.

CallProfile: 27340a55-78cc-4179-a47d-b346cf7f7340

Note: If parameter chatAllowed is configured to unset then chat must not be displayed or must be grayed out.

Verify

Verify if the configuration is applied successfully.

  1. Start a call to the space where the CallProfile is assigned and send messages to users in the conference.

  1. If all configuration is correct, messages must be displayed in the Skype for Bussiness side as shown in the image:

 

Troubleshoot

There is currently no specific troubleshooting information available for this configuration.

TAC Authored

Contributed by Cisco Engineers

  • Moises Martinez

Was this Document Helpful?

FeedbackFeedback

Contact Cisco