Does the TANDBERG EX90 support 60 fps?

Available Languages

Updated:April 23, 2015
Document ID:112496

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This article relates to Cisco TelePresence System EX90.

Q. Does the TANDBERG EX90 support 60 fps?

A. Yes, but this is only recommended for very good light conditions.

Login to the EX90 using ssh and execute the following API command to set the camera frequency:

xConfiguration Cameras Camera 1 FrameRate: <30Hz,60Hz>

Note: Since the TANDBERG EX90 is a desktop system, and because the light conditions in a normal office environment is normally not good enough, the default setting is 30 Hz.

Notice also that the transmitted frame rate is affected by the Optimal Definition settings:

xConfiguration Video Input Source 3 OptimalDefinition ProfilexConfiguration Video Input Source 3 OptimalDefinition Threshold60fps

Related Information

Revision History

Revision Publish Date Comments
1.0
23-Apr-2015
Initial Release

Was this Document Helpful?

FeedbackFeedback

Contact Cisco