Guest

Cisco Unity

Installing FaxtoMail Driver without View Mail for Outlook (VMO)

Document ID: 13951



Contents

Introduction
Prerequisites
      Requirements
Procedure
NetPro Discussion Forums - Featured Conversations
Related Information

Introduction

This document explains how to install the fax to mail driver without installing ViewMail for Outlook (VMO), on the client side. The information in this document is based on Cisco Unity for Exchange with Fax, in 2.4.6 and earlier.

Prerequisites

Requirements

There are no specific requirements for this document.

Procedure

Complete these steps in order to install the fax to mail driver without installing VMO:

  1. Make sure the generic printer driver for the client operating system is installed.

  2. Run the fax to mail setup from the CD. The setup is located under \Fax\Windows\FaxToMail.

NetPro Discussion Forums - Featured Conversations

Networking Professionals Connection is a forum for networking professionals to share questions, suggestions, and information about networking solutions, products, and technologies. The featured links are some of the most recent conversations available in this technology.
NetPro Discussion Forums - Featured Conversations for Voice
Service Providers: Voice over IP
Voice & Video: Voice over IP
Voice & Video: IP Telephony
Voice & Video: IP Phone Services for End Users
Voice & Video: Unified Communications
Voice & Video: IP Phone Services for Developers
Voice & Video: General

Related Information



Updated: Feb 02, 2006Document ID: 13951