Cisco Unified SRST 4.0: Monitoring and Maintaining Cisco Unified SRST

Table Of Contents

Monitoring and Maintaining Cisco Unified SRST


Monitoring and Maintaining Cisco Unified SRST


To monitor and maintain Cisco Unified Survivable Remote Site Telephony (SRST), use the following commands in the privileged EXEC and mode.


Note Prior to version 4.0, the name of this product was Cisco SRST.


Command
Purpose

Router# show running-config

Displays the configuration.

Router# show call-manager-fallback all

Displays the detailed configuration of all the Cisco IP phones, voice ports, and dial peers of the Cisco Unified SRST router.

Router# show call-manager-fallback dial-peer

Displays the output of the dial peers of the Cisco Unified SRST router.

Router# show call-manager-fallback ephone-dn

Displays Cisco IP phone destination numbers when in call manager fallback mode.

Router# show call-manager-fallback voice-port

Displays output for the voice ports.

Router# show ephone phone

Displays Cisco IP phone status.

Router# show ephone offhook

Displays Cisco IP phone status for all phones that are off hook.

Router# show ephone registered

Displays Cisco IP phone status for all phones that are currently registered.

Router# show ephone remote

Displays Cisco IP phone status for all nonlocal phones (phones that have no Address Resolution Protocol [ARP] entry).

Router# show ephone ringing

Displays Cisco IP phone status for all phones that are ringing.

Router# show ephone summary

Displays a summary of all Cisco IP phones.

Router# show ephone telephone-number phone-number

Displays Cisco IP phone status for a specific phone number.

Router# show ephone unregistered

Displays Cisco IP phone status for all unregistered phones.

Router# show ephone-dn tag

Displays Cisco IP phone destination numbers.

Router# show ephone-dn summary

Displays a summary of all Cisco IP phone destination numbers.

Router# show ephone-dn loopback

Displays Cisco IP phone destination numbers in loopback mode.

Router# show voice port summary

Displays a summary of all voice ports.

Router# show dial-peer voice summary

Displays a summary of all voice dial peers.