Document ID: 48238
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
Problem
Solution
Related Information
Introduction
This procedure provides the system manager with configuration items to check in the event Cisco MeetingPlace for Outlook invitations are blank.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on Cisco MeetingPlace for Outlook version 3.4.2.x.
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
Conventions
For more information on document conventions, refer to the Cisco Technical Tips Conventions.
Problem
The invitations in Cisco MeetingPlace for Outlook are blank.
Solution
If the Cisco MeetingPlace for Outlook custom form is installed and you can schedule MeetingPlace meetings from Outlook, but the meeting invitations are blank, follow these instructions:
-
Open Microsoft Outlook 98 or Outlook 2000 on the scheduling machine.
-
On the Outlook toolbar, click the Tools tab and choose Options.
-
Click the Other tab and choose Advanced Options.
-
Click Add-In Manager and verify that the MeetingPlace Calendar Scheduler extension is there and checked.
-
If it is not, click Install and enter the path to the Addins folder (usually C:\Program Files\Microsoft Office\Office\Addins). Double-click MPExt.ecf, and then click OK three times.
Related Information
- Conferencing Software
- Voice Technologies
- Voice, Telephony and Messaging Devices
- Voice Software
- Recommended Reading: Troubleshooting Cisco IP Telephony
- Technical Support - Cisco Systems
| Updated: Jan 31, 2006 | Document ID: 48238 |