Configuration Guide for Cisco Unified MeetingPlace Web Conferencing Release 5.3.
Configuring WebConnect

Table Of Contents

Configuring WebConnect

About WebConnect

Prerequisites for Configuring WebConnect

Restrictions for Configuring WebConnect

WebConnect Concepts and Definitions

About Scheduling a Meeting with WebConnect

WebConnect and Segmented Meeting Access Environments

How to Configure WebConnect

Updating User Groups

Configuring Web Servers for WebConnect

Configuring a Site

Configuring a Rollover Map

Deleting a Rollover Map

Assigning Rollover Maps to User Groups

Deleting User Groups


Configuring WebConnect


WebConnect provides seamless integration between multiple internal and external web servers through a single URL. Making use of a single database and a customer-defined rollover sequence, WebConnect ensures the availability of Cisco Unified MeetingPlace Web Conferencing resources while still offering the benefits of a consistent user experience.

Topics in this section include:

About WebConnect

How to Configure WebConnect

About WebConnect

Before you configure WebConnect, you should understand the following concepts:

Prerequisites for Configuring WebConnect

Restrictions for Configuring WebConnect

WebConnect Concepts and Definitions

About Scheduling a Meeting with WebConnect

WebConnect and Segmented Meeting Access Environments

Prerequisites for Configuring WebConnect

Make sure that your system meets the requirements for WebConnect configuration by reviewing the "WebConnect Requirements" section of the Release Notes for your release of Cisco Unified MeetingPlace Web Conferencing.

Install Cisco Unified MeetingPlace Web Conferencing and make sure that User Groups, Meeting Categories, and User Profiles are synchronized on all internal and dedicated external sites that are participating in a rollover map. If these parameters are not synchronized, rolled meetings will fail.

If you do not have a profile synchronization procedure installed, see the "Importing User Profile and Group Information" section of the Administrator Guide for Cisco Unified MeetingPlace Audio Server Release 5.3 for manual profile synchronization procedures.

You must synchronize Meeting Categories between two Cisco Unified MeetingPlace Audio Server systems manually; otherwise, Meeting Category searches will not work properly.

Cisco Unified MeetingPlace web servers from each site must share the same SQL database.

Example: You are configuring two sites, Site A and Site B. After you complete Site A, install the Cisco Unified MeetingPlace web server for Site B; then, direct Site B to use the same SQL server that Site A uses.

Related Topics

About WebConnect

Restrictions for Configuring WebConnect

We do not support the WebConnect feature on UNIX systems.

Related Topics

About WebConnect

WebConnect Concepts and Definitions

See the following table for definitions of key WebConnect concepts.

Concept
Definition

System

A standalone Cisco Unified MeetingPlace Audio Server system.

Site

A natural group of systems on which users can schedule and host their meetings.

Sites are not limited to any geographical limitations.

Sites are limited to standalone or network configurations.

Servers that can be reached via Single Number Access must belong to the same site.

Currently, each site can only contain one system.

External site

A site that is outside your network and used for dedicated use.

External sites can have either the same features, for example, the ability to attach documents or access meeting recordings, or more features than sites that are on your network.

Dedicated external sites sharing the same database is not a supported WebConnect configuration.

Cisco Unified MeetingPlace services

A suite of services that supports Cisco Unified MeetingPlace by offering a range of deployment options:

Managed Services—Equipment owned by Cisco installed on a customer's premise and connected to their network, but managed by the Cisco Unified MeetingPlace Services group.

Hosted Services—Equipment owned by Cisco installed off-site at a hosted facility but still connected to a dedicated customer's network. Hosted Services is equivalent to a dedicated external site.

For further information on Cisco Unified MeetingPlace Services, see your Cisco sales representative.

Cisco Unified MeetingPlace image

A collection of sites (internal and external) that end-users can roll across.

Separate images do not share database information, such as lists of meetings, or profile directories.

A site can be a member of several different images, for example, Cisco Unified MeetingPlace Services (a site) can be part of Image 1, which contains all sites within the U.S., as well as part of Image 2, which contains all sites within Asia Pacific.

Rollover map

The sequential mapping of sites within a Cisco Unified MeetingPlace Image. For an example of a rollover map, see the "About Scheduling a Meeting with WebConnect" section.


Related Topics

About WebConnect

About Scheduling a Meeting with WebConnect

The ability to schedule Cisco Unified MeetingPlace web conferences is achieved through a single interface: the Cisco Unified MeetingPlace Web Conferencing home page. End-users are only required to know a single URL regardless of which server they wish to schedule on.

Before users begin scheduling meetings using WebConnect, make sure of the following:

User profile time zone settings are accurate. Using the default "localtime" setting can cause errors by scheduling rolled meetings for a different time of day.

Time zone and profile information are synchronized between all internal and dedicated external sites.

After receiving a scheduling request, Cisco Unified MeetingPlace Web Conferencing attempts to schedule on the first site indicated in the scheduler's rollover map. If it cannot schedule this meeting on this site, Cisco Unified MeetingPlace Web Conferencing refers to the scheduler's rollover map and attempts to schedule on the next listed site. For example, each map in the following table contains a different rollover sequence. If your user group is assigned to Map A and you schedule a meeting, the following occurs:

Cisco Unified MeetingPlace Web Conferencing first attempts to schedule your meeting on the Santa Clara site.

If the Santa Clara site is unavailable, Cisco Unified MeetingPlace Web Conferencing then attempts to schedule according to the sequence outlined in your rollover map: San Francisco and then Dallas and finally Cisco Unified MeetingPlace Services.

Map
Rollover Site 1
Rollover Site 2
Rollover Site 3
Rollover Site 4

Map A

Santa Clara

San Francisco

Dallas

MP Services

Map B

San Francisco

Santa Clara

Dallas

MP Services

Map C

Dallas

Santa Clara

MP Services

N/A

Map D

Dallas

San Francisco

Santa Clara

N/A


When Cisco Unified MeetingPlace Web Conferencing locates an available site, it schedules the meeting. A warning message prompting the user to confirm rollover to another site appears if configured. For information on configuring the warning message, see the "Configuring a Site" section.

From the New Meeting page, users can choose to schedule on a site other than their default site by choosing one from the Site drop-down menu. If the meeting cannot be scheduled on the chosen site, rollover will ensue beginning at the first site on their rollover map. Users can also choose to click Try on this site only, which effectively turns off the automatic rollover function. However, if users check this checkbox and scheduling fails, they will receive an error message.


Note Recurring meetings will only roll if all meetings in a recurring chain fail to schedule on the initial site.


Figure 7-1 illustrates how meetings are scheduled with WebConnect.

Figure 7-1 How Meetings Are Scheduled with WebConnect

1. User submits a request to schedule a meeting.

2. Cisco Unified MeetingPlace Web Conferencing attempts to schedule the meeting on Site 1, as indicated on the user's rollover map, or on a particular user-specified site.

3. If Site 1 is unavailable, Cisco Unified MeetingPlace Web Conferencing rolls the scheduling information to Site 2.

4. Cisco Unified MeetingPlace Web Conferencing locates an available server on Site 2 and schedules the meeting.

5. The scheduler receives a message indicating that the meeting has been scheduled on Site 2.

Related Topics

About WebConnect

WebConnect and Segmented Meeting Access Environments

If you have a segmented meeting access (SMA) configuration, you probably have some web servers inside your private corporate network and separate web servers in a DMZ reserved for external meetings. Meetings scheduled on internal servers remain on internal servers throughout the rollover process. Meetings that are intended to be available on the external server roll to external servers.

Factors you should be aware of when configuring WebConnect for SMA environments include:

Every site requires one external web server in the DMZ zone.

Users can only schedule externally accessible meetings on sites that have a web server residing in the DMZ.

To provide external users access to meetings, the meeting scheduler must use a profile that can schedule meetings on external web servers. These external web servers must exist on all sites within the meeting scheduler's rollover maps.

Related Topics

About WebConnect

How to Configure WebConnect

To configure WebConnect, complete the following tasks in the order shown:

Updating User Groups

Configuring Web Servers for WebConnect

Configuring a Site

Configuring a Rollover Map

Assigning Rollover Maps to User Groups

Updating User Groups

Before You Begin

Read the "About WebConnect" section.

Ensure that your system meets the requirements for WebConnect configuration by reviewing the "WebConnect Requirements" section of the Release Notes for your release of Cisco Unified MeetingPlace Web Conferencing.

If you have user profiles assigned to groups, set their attribute values to Group Default. Altering the value of the group simultaneously alters the value of the profile.

Procedure


Step 1 Sign in to Cisco Unified MeetingPlace Web Conferencing.

Step 2 From the Welcome page, click Admin; then, Replication Service.

Step 3 From the Replication Service Command drop-down menu, choose Update All Groups.

This triggers a complete group replication at the next update interval.

Step 4 Click Submit.

Any new User Groups created in Cisco Unified MeetingPlace automatically replicate from the Cisco Unified MeetingPlace Audio Server system to the SQL Server database.

Step 5 Proceed to the "Configuring Web Servers for WebConnect" section.


Related Topics

How to Configure WebConnect

Configuring Web Servers for WebConnect

Before You Begin

Complete the instructions in the "Updating User Groups" section.

Procedure


Step 1 Sign in to Cisco Unified MeetingPlace Web Conferencing.

Step 2 From the Welcome page, click Admin; then, Web Server.

Step 3 From the "View" section of the page, click the name of the web server you want to configure.

Information about this server populates the top portions of the page.

Step 4 For Hostname, enter the web server's Fully Qualified Domain Name (FQDN), that is, hostname.domain.com, or IP address if this information is not already entered.

Step 5 For Require Proxy, indicate if a proxy server is required by choosing Yes or No.

For more information on proxy servers, see the "About Proxy Servers" section on page 2-1.

Step 6 (Optional) If you chose Yes for Step 5, complete the following:

a. For Proxy User, enter the proxy user login.

b. For Proxy Password, enter the proxy password.

c. For Proxy Server, enter the hostname of the proxy server.

d. For Proxy Port, enter the proxy port used for your proxy server.


Note This value depends on the setup of your web server and must match proxy server settings. The default setting is port 8080.


Step 7 For Require Web Server Authentication, indicate if the web server accepts Windows authentication.

If a destination rollover site's IIS web server requires basic or integrated Windows authentication, you will need to configure an account to access the destination.

For more information on web server authentication, see Related Topics.

Step 8 (Optional) If you chose Yes for Step 7, complete the following:

a. For Windows User Name, enter the domain_name\user_login.

b. For Windows Password, enter the Windows login password.

Step 9 Click Submit.

Step 10 Proceed to the "Configuring a Site" section.


Related Topics

Configuring User Authentication in Cisco Unified MeetingPlace Web Conferencing Release 5.3(104), page 4-1

Configuring User Authentication in Cisco Unified MeetingPlace Web Conferencing Release 5.3(235) and Later Releases, page 5-1

Configuring a Site

Before You Begin

Complete the instructions in the "Configuring Web Servers for WebConnect" section.

Procedure


Step 1 Sign in to Cisco Unified MeetingPlace Web Conferencing.

Step 2 From the Welcome page, click Admin; then, Site.

Step 3 From the "View" section of the page, click the name of the site you want to configure.

Information about this site populates the "Edit" section of the page.

Step 4 Configure the site as indicated in the following table:

Parameter
Description

Site Name

The name of the chosen site.

Note The Site Name entry on the Site administrative page must match the Web Server Name entry on the Web Server administrative page. This must be consistent for each site. If these entries do not match, searches will not display the same site name.

Primary Web Server

Indicates which web server in this site is designated as the entry point for all WebConnect rollover traffic.

Contact Phone Number

The phone number assigned for this site. If this field is blank, enter the phone number.

Site Included in Image

Indicates if this site is part of your rollover map. If it is, choose Yes. If it is not, choose No.

DMZ Web Server

Indicates the external web server assigned to this site. If there is not an external web server assigned to this site, this field is blank.

Load Stats Poll Period (Seconds)

Configure how often the web server is polled for its current load index.

Note The default is 60 seconds.

Dedicated External

Indicates if this site is a Hosted Service. If it is, choose Yes. If it is not, choose No.

Warn before Rolling onto Site

To invoke a warning prompt that users will see whenever their meetings are rolled to this site, choose Yes. The warning prompt requires the user to confirm the rollover.

To have Cisco Unified MeetingPlace Web Conferencing roll meetings to this site without prompting for confirmation, choose No.

Recommended  Configure external sites to warn users before rolling as usage on external sites is calculated on a cost-per-minute basis.

Roll on Meeting ID Conflict

To invoke automatic rollover in the case of meeting ID conflicts, choose Yes. Release 5.3 will automatically roll the meeting to the next available site in the user's rollover map and schedule the meeting using the entered meeting ID.

To disable rollover in the case of meeting ID conflicts, choose No. Release 5.3 will display an error message suggesting that the user change the meeting ID.

Internal Web Server

Indicates which web server in this site is designated as the entry point for all dedicated internal rollover traffic.

Allow Web Load Balancing in Ad Hoc Video Meetings

To always invoke load balancing when a user with video scheduling privileges schedules a meeting on this site, choose Yes.

If the web portion of the meeting lands on the web server with Cisco Unified MeetingPlace Video Integration installed, ad-hoc video will work successfully.

If the web portion of the meeting lands on a web server that does not have the video integration installed, video features are not available from the meeting console.

To force all meetings scheduled by users with video scheduling privileges to be held on the video-enabled web server, choose No. This ensures that if users wants to start an ad-hoc video meeting, resources are available. This is the default and recommended setting.

Note If you have the video integration installed in a web server cluster that does not have load balancing configured, leave this parameter set to No.


Step 5 In the Site Customization Default Values section, choose Yes for all parameters.

Choosing Yes synchronizes all of the web servers in this site to share the same parameters.

For parameter descriptions, see the "Customizing Local Web Server Options" section on page 2-34.

Step 6 Click Submit.

Step 7 Repeat Step 3 to Step 6 for each remaining site listed in the "View" section of the Site administrative page.

Step 8 (Optional) To delete a site from your image, choose it and click Delete.


Note You can only delete external sites from an image.


Step 9 Proceed to the "Configuring a Rollover Map" section.


Related Topics

Customizing Local Web Server Options, page 2-34

Configuring a Rollover Map

The rollover sequence tells Cisco Unified MeetingPlace Web Conferencing which site to contact, and in what order, in case of a scheduling failure.

Before You Begin

Complete the instructions in the "Configuring a Site" section.

Procedure


Step 1 Sign in to Cisco Unified MeetingPlace Web Conferencing.

Step 2 From the Welcome page, click Admin; then, Rollover Map.

Step 3 Choose your rollover map:

To configure a new rollover map, enter a new map name in the Rollover Map Name field.

To modify a previously configured rollover map, choose the rollover map you want to modify from the "View" section of the page. Information about this map populates the "Edit" section of the page with the Priority column automatically listing any internal sites followed by external sites.

Step 4 From the "Edit" section of the page, configure your rollover map as follows:

a. For Site Name, click the arrow next to the first drop-down menu and choose a site. This is the first site Cisco Unified MeetingPlace Web Conferencing will attempt to schedule on.


Note This setting overrides any configuration settings established for a home site in MeetingTime.


b. (Optional) If you are creating a single-site rollover map for a group without rollover privileges, click Submit and proceed to the "Assigning Rollover Maps to User Groups" section.

c. (Optional) If you are creating a multiple-site rollover map, choose a second site from the Site Name drop-down menu. If your first site is unavailable for scheduling, this is the next site Cisco Unified MeetingPlace Web Conferencing will attempt to schedule on.

d. Repeat with each subsequent drop-down menu in the Site Name column.

Step 5 Click Submit.

Your newly defined rollover map appears in the "View" section of the page.

Step 6 Proceed to the "Assigning Rollover Maps to User Groups" section.


Related Topics

How to Configure WebConnect

Deleting a Rollover Map

Procedure


Step 1 Sign in to Cisco Unified MeetingPlace Web Conferencing.

Step 2 From the Welcome page, click Admin; then, Rollover Map.

Step 3 From the "View" section of the page, click the name of the Rollover map you want to delete.

Information about this rollover map populates the "Edit" section of the page.

Step 4 Click Delete.


Assigning Rollover Maps to User Groups

You must assign all groups to a rollover map. Assign groups who should not have rollover privileges to a single-site rollover map. Users belonging to a group without a rollover map will receive error messages.

Before You Begin

Update all groups as described in the "Updating User Groups" section.

Procedure


Step 1 Sign in to Cisco Unified MeetingPlace Web Conferencing.

Step 2 From the Welcome page, click Admin; then, User Group.

Step 3 From the "View" section of the page, choose the user group that you want to configure by doing one of the following:

Click the name of the user group that you want to configure.

If you cannot find your group, or the list is too lengthy, use the Search option as follows:

Choose By Group Name, By Billing Code, or By Rollover Map Name.

Enter your search term in the box provided and click Search.

Click the Group Name of the user group you want to configure from the updated list.

Step 4 For Rollover Map, choose a map from the drop-down menu.

Step 5 Click Submit.


Related Topics

How to Configure WebConnect

Deleting User Groups

This procedure deletes user groups from the SQL Server database, but not the Cisco Unified MeetingPlace database. If a group has been deleted in error, the Replication Service will repopulate the group listing on the next scheduled update.

Procedure


Step 1 Sign in to Cisco Unified MeetingPlace Web Conferencing.

Step 2 From the Welcome page, click Admin; then, User Group.

Step 3 From the "View" section of the page, choose the user group that you want to delete by doing one of the following:

Click the name of the user group that you want to configure.

If you cannot find your group, or the list is too lengthy, use the Search option as follows:

Choose By Group Name, By Billing Code, or By Rollover Map Name.

Enter your search term in the box provided and click Search.

Click the Group Name of the user group you want to configure from the updated list.

Step 4 From the "Edit" section of the page, click Delete.