Table Of Contents
Symbols - Numerics - A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W - X - Y - Z
Master Index
Symbols
! character
comments FC-151
in copy output FC-178
in ping output FC-244
# character
in copy output FC-178
privileged EXEC prompt FC-12
. P2C-84
. character
in copy output FC-178
in ping output FC-244
in TFTP session output FC-245
> prompt FC-11
? command FC-19
^ character, in command output FC-20
^Z FC-13
| character
use in show and more commands FC-33
Numerics
100VG-AnyLAN port adapter
(examples) IC-76
configuring IC-42
10BASE-T IC-35
7-bit character set FC-81
8-bit character set FC-81
911 outgoing calls, MGCP support of VC-182
A
AAA (authentication, authorization, and accounting)
accounting
AV pairs SC-102
broadcasting SC-94
command type SC-91
compatibility with authentication proxy SC-297
configuring (example) SC-102
connection type SC-87
enabling SC-96
EXEC type SC-89
interim records SC-99
method lists (example) SC-81
methods (table) SC-97
monitoring SC-102
network configuration (figure) SC-83
network type SC-84
prerequisites SC-95
resource type SC-91
system type SC-90
verifying SC-102
ARAP authentication
authorized guest logins SC-34
guest logins SC-34
line password SC-34
local password SC-34
methods (table) SC-33
TACACS+ SC-35
authentication
configuring SC-24
(examples) 1
default, enable SC-39
double authentication SC-42to SC-45
methods SC-24
network configuration (figure) SC-22
server groups SC-22
authentication, two-way, restrictions SC-126
authorization SC-69
AV pairs SC-75
configuring SC-73
configuring (examples) SC-76to SC-80
for global configuration commands SC-74
network configuration (figure) SC-71
prerequisites SC-72
RADIUS SC-74
reverse telnet SC-75
server groups SC-71
TACACS+ SC-74
types SC-72
broadcast accounting SC-94
call tracking VC-264
configuring SC-19
disabling SC-20
DNIS SC-119
enable default authentication, methods (table) SC-39
enabling SC-19
gateway VC-255
gateways
configuration (example) VC-281
GGSN
configuration (example) MWC-57
configuring globally MWC-36
large-scale dial-out network security services DC-679
login authentication
enable password SC-27
Kerberos SC-27
line password SC-27
local password SC-27
methods (table) SC-26
RADIUS SC-28, SC-31, SC-35, SC-38
TACACS+ SC-28, SC-31, SC-35, SC-38
message banners
(examples) SC-58
failed-login banner, configuring SC-41
login banner, configuring SC-41
accounting SC-81
NASI authentication
enable password SC-37
line password SC-37
local password SC-37
methods SC-36
TACACS+ SC-38
POD (packet of disconnect) SC-42
configuration SC-42
example SC-59
PPP authentication SC-30
preauthentication SC-121
preauthentication overview DC-728
RADIUS
accounting SC-127
authentication SC-127
authorization SC-127
resource accounting SC-93
configuring SC-100
resource failure stop accounting SC-91
configuring SC-100
server groups
authentication SC-22
authorization SC-71
broadcast accounting SC-94
RADIUS, configuring SC-117
TACACS+, configuring SC-145
session MIB SC-94
configuration SC-102
example SC-106
SNMP SC-94
virtual profiles
AAA configuration (example) DC-501, DC-504
virtual template configuration (example) DC-502
VPN
configuring DC-524
local tunnel authentication DC-530
local tunnel authentication (examples) DC-564
VPN per-user configuration DC-538
AAA/TACACS+
ARA authentication, enabling TC-73
PPP authentication, enabling DC-399, DC-599
undefined list name, (caution) DC-598
AAA accounting
syslog records VC-259
aaa accounting command DC-679, VC-321
aaa accounting connection h323 command VC-261, VC-320
aaa accounting connection h323 start-stop radius command VC-493
aaa accounting resource start-stop group command SC-100
aaa accounting resource stop-failure group command SC-100
aaa authenication login h323 radius command VC-493
aaa authentication arap command TC-73
aaa authentication command DC-679
aaa authentication login command VC-261, VC-314, VC-318
aaa authentication nasi command TC-91
aaa authentication ppp command DC-399, DC-598, DC-599, MWC-36
aaa authentication ppp command: undefined list-name
(caution) SC-51
aaa authorization command DC-679, MWC-36
aaa authorization configuration default command DC-680
aaa new-model command DC-679, DC-680, MWC-36, VC-261, VC-314, VC-318, VC-493
aaa preauth command SC-121
AAA preauthentication configuration mode, summary FC-391
aaa route download command DC-680
AAL (ATM adaptation layer)
ATM traffic convergence VC-422
configuring WC-21
description WC-2
AAL3/4
and SMDS (examples) WC-107
static mapping WC-54
AAL5, configuring (example) WC-98
AAL5-LLC SNAP encapsulations and virtual circuit descriptors WC-55
AAL5-MUX, transparent bridging on WC-55
AAL5-NLPID, transparent bridging on WC-55
AAL5-SNAP, transparent bridging on WC-6
abbreviating commands FC-19
ABR (available bit rate) for ATM (example) WC-100
abr rate-factors command WC-22
absolute command FC-278
absolute-timeout command TC-14
accept dialin command WC-132
accept-dialin command DC-535
accept-dialin group configuration mode FC-418
accept-dialout command DC-537
accept-dialout group configuration mode FC-418
accept-lifetime command
DRP route authentication IPC-85
EIGRP route authentication IPC-266
access-class command IPC-98, TC-33, TC-134, WC-318
Access Concentrator, PPPoE over ATM WC-129
access control
AppleTalk P2C-16to P2C-25, TC-76
ARA TC-70
asynchronous interfaces (example) DC-43
bridging
using byte offset BC-110
using station names BC-110
DECnet P3C-48
IPX P2C-122to P2C-124, P2C-133
legacy DDR, configuring DC-371, DC-402to DC-403
NetBIOS filtering BC-109
outgoing calls, configuring DC-269, DC-371
VINES P3C-18
XNS P3C-127
access control, IP IPC-86, IPC-98
access control lists
See access lists
access-enable command SC-195
access-expression command BC-115
access expressions
combining administrative filters BC-113
configuration (examples) BC-139, BC-140
configuring BC-114
optimizing BC-115
access filters
NetBIOS configuration
(example) BC-136
description BC-109
SNAP frames (example) BC-138
SR/TLB configuration (example) BC-132
SRB access expressions, combining BC-113
access groups
See also GGSN access groups
access groups, DECnet P3C-48
access groups, IP IPC-98
access-list (encryption) command SC-343
access-list (extended) command QC-57
access-list (IP extended) command SC-195
access-list (standard) command QC-50
access-list additional-zones command P2C-19to P2C-20
access-list cable-range command P2C-21
access-list command BC-45, BC-112, DC-269, DC-355, DC-359, DC-867, IC-66, SC-193, VC-340, VC-345
DECnet P3C-47
IPX
SAP P2C-125
NLSP route aggregation filtering P2C-106to P2C-113
access-list compiled command IPC-95
access-list includes command P2C-21
access-list network command P2C-20, P2C-21
access-list other-access command P2C-21
access-list other-nbps command P2C-20
access-list rate-limit command QC-57
access lists
Apollo Domain
creating P3C-10
interface, applying to P3C-10
AppleTalk
cable ranges P2C-21
configuration (examples) P2C-60to P2C-70
displaying P2C-55
guidelines P2C-19
network numbers P2C-17
applying to interfaces SC-182
bridging
(caution) BC-48
defining BC-47
filtering by protocol type BC-46
redefining BC-115
CBAC
basic configuration SC-232
configuring SC-232
how it works SC-224
criteria statements, order of SC-181
DDR
IP DC-356
packets, interesting DC-402
transparent bridging DC-355
VINES DC-358
XNS DC-359
DECnet
configuring P3C-46
connect-initiate packets, filtering P3C-47
creating P3C-47
extended P3C-47
filters, adding to P3C-47
standard P3C-47
dialer groups DC-360
dialer profiles
DECnet DC-432
Ethernet type codes DC-436
IP DC-433
VINES DC-432
XNS DC-434
dynamic entries, deleting SC-199
GTS, configuring QC-224
IP
BGP access list filters IPC-300
configuration examples IPC-121, IPC-123
controlling NHRP initiation IPC-22
dynamic IPC-88
extended IPC-86, IPC-88, IPC-89
fragment control IPC-92
implicit deny when no match found IPC-89, IPC-92
inbound or outbound interfaces, applying on IPC-98
interface, applying to IPC-97
named IPC-89
numbered IPC-86
See Reflexive Access Lists
standard IPC-86, IPC-87, IPC-89
time-based IPC-96
undefined IPC-98
violations, accounting IPC-107
violations, logging IPC-88, IPC-91
virtual terminal lines, setting on IPC-98
IPX
configuration (examples) P2C-172to P2C-180
extended P2C-122
extended, creating P2C-125
implicit deny P2C-128
implicit masks P2C-128
input P2C-123
named P2C-125
NetBIOS
description 1
NLSP route aggregation P2C-122
routing table, filtering P2C-130
SAP, creating P2C-125
standard P2C-122
standard, creating P2C-125
time-based P2C-129
types P2C-122
violations, logging P2C-125, P2C-127
IPX MLS
configuration (example) XC-301
overview XC-267
restrictions XC-292
ISO CLNS, configuring P3C-86
LAT
configuration (example) TC-37
defining TC-32
legacy DDR, interface assignment DC-371, DC-402
named
extended, configuration mode FC-398
standard, configuration mode FC-412
numeric ranges for protocols (table) SC-180
overview SC-177
Policy Propagation via BGP feature QC-47
regular expression pattern matching in TC-204
specifying
by name SC-180
by number (table) SC-180
SRB
access expressions, altering BC-115
NetBIOS filtering BC-98
Turbo Access Control Lists IPC-95
using time-ranges with FC-277
using with WCCP FC-381
VINES
creating P3C-19
displaying P3C-26
extended P3C-18
simple P3C-19
standard P3C-18
types P3C-18
X.29, configuring TC-133
XNS
3Com (example) P3C-134
creating P3C-126
extended list P3C-125
standard list P3C-124
See also IKE; IPSec, access lists; IPSec, crypto access lists
access lists, X.29
(example) WC-343
creating WC-318
line, applying to WC-318
access-list within command P2C-21
access-list zone command P2C-20
access-mode command MWC-28, MWC-38
access-point command MWC-28, MWC-38
access-point configuration mode, summary FC-391
access-point list configuration mode, summary FC-392
access point lists
See GGSN access point lists
access-point name command MWC-28
access points
See GGSN access points
access restrictions, asynchronous interfaces DC-43
access services
protocol translation TC-6
access-violation command MWC-28
accounting
description VC-256
IPX
configuring P2C-151
database threshold P2C-152
enabling P2C-152
filters P2C-152
maximum transit entries P2C-152
overloaded acct-session ID field VC-257
per VLAN XC-313
statistics XC-143
syslog messages VC-259
accounting, DECnet
configuring P3C-48
database threshold P3C-49
enabling P3C-49
filters P3C-49
maximum transit entries P3C-49
accounting via RADIUS/TACACS+ VC-293
ACF message
RAS VC-223
ACL (access control lists)
See access lists
activation-character command FC-77
active SVCs and PVCs, displaying WC-292
adapter command BC-683, BC-698, BC-699
address command SC-388
addressed-key command SC-372, SC-388
addresses
Apollo Domain P3C-7
AppleTalk P2C-9
(example) P2C-10
network numbers P2C-9
asynchronous interfaces DC-151
default, configuring DC-151
dynamic, configuring DC-151
DECnet
(example) P3C-34
address translation P3C-38
MAC address P3C-34
mapping name P3C-39
filtering
destination BC-113
source BC-113
IP pooling TC-133
IPX P2C-79
(example) P2C-80
network numbers P2C-79
node numbers P2C-79
ISO CLNS
IS-IS NSAPs P3C-64
ISO IGRP NSAPs P3C-64
NSAPs, addressing structure of P3C-66
TARP P3C-99
Layer 2 MAC XC-8
Layer 3 XC-8
mapping XC-8
multicast filtering BC-43
SMDS WC-246
IP WC-251
multicast WC-246
structure WC-244
symbolic host X.25, configuring TC-135
unnumbered interfaces DC-150
unnumbered interfaces, (example) DC-48
VINES
(example) P3C-16
network number P3C-15
subnetwork number P3C-16
X.25
interface-based insertion and removal WC-295
IP-to-X.121 mapping WC-277, WC-280
modifying WC-290
PVC protocol WC-282
substituting in local route WC-296
X.121, setting WC-268
X.121 alias, setting WC-275
XNS P3C-122
address family configuration, NLRI to address family configuration, converting IPC-344
address family configuration mode, summary FC-392
addressing
Cisco Easy IP configuration (examples) DC-479
dynamic, configuring DC-48
addressing, in VLANs XC-321
address mapping, static WC-167
address pooling
DHCP DC-605
global default mechanism, local pooling DC-606
address pools
names, creating IPC-67
obtaining IP addresses IPC-63
address ranges, summarizing
IS-IS IPC-281
OSPF IPC-230
address resolution, establishing for IP IPC-12
adjacency levels, IS-IS, specifying IPC-278
administrative distance
BGP, setting IPC-317
definition IPC-366
administrative filtering
address
destination BC-113
MAC-layer BC-44
multicast BC-43
source BC-113
Token Ring BC-113
dynamically determined stations BC-43
LAT service announcements BC-48
protocol type BC-112
source-route bridging BC-111
admission control QC-246
ADSL (asymmetric digital subscriber line), PPP over ATM for WC-124, WC-146
advertise command IPC-144
AEP (AppleTalk Echo Protocol) P2C-2
AESA (ATM End System Address) embedded E.164 address format WC-77
AFI (authority and format identifier) field, NSAP addresses P3C-65
agent command IPC-145
aggregate-address command IPC-304
aggregate addresses, configuring for BGP IPC-303
AH (authentication header) SC-335
alarm-trigger blue command VC-552
algorithms
See IKE, algorithms
alias command FC-260
aliases
URL Prefixes FC-134
use in IOS File System (URL Prefixes) FC-134
use in ROM monitor mode FC-17
See also command aliases
alias static command VC-313
alias X.121 address, enabling WC-275
all-nets broadcasts, XNS P3C-129
allocate lu command BC-800, BC-813
ALPS (Airline Product Set)
ASCU configuration BC-497
circuit configuration BC-496, BC-501
configuration
task list BC-494
CPE central configuration BC-499
local peer IP address configuration BC-495
maintaining BC-503
MATIP
(example) BC-504
description BC-492
topology BC-492
monitoring BC-503
remote peer IP address configuration BC-495
remote router configuration BC-495
service message configuration BC-500
supported platforms BC-494
topology
(figure) BC-492
ALC protocol BC-492
mainframe access BC-492
MATIP protocol BC-492
TCP-based protocol BC-492
UTS protocol BC-492
verification BC-502
alps a1-map a2-map command BC-498
alps alias command BC-499
alps ascu command BC-498
ALPS ASCU configuration mode, summary FC-392
alps auto-reset command BC-499
alps circuit command BC-496
ALPS circuit configuration mode, summary FC-392
alps connection-type permanent command BC-496
alps default-circuit command BC-498
alps enable-alarms ascu command BC-501
alps enable-alarms circuit command BC-501
alps enable-alarms peer command BC-501
alps enable-ascu command BC-499
alps enable-circuit command BC-497
alps error-display command BC-499
alps host-hld host-link command BC-500
alps hostlink command BC-496
alps idle-timer command BC-497
alps keepalive command BC-495
alps lifetime-timer command BC-496
alps local-hld remote-hld command BC-496
alps local-peer command BC-495, BC-499
alps matip-close-delay command BC-496
alps max-msg-length command BC-498
alps mpx command BC-497
alps n1 command BC-497
alps n2 command BC-497
alps n3 command BC-497
alps poll-pause command BC-498
alps primary-peer command BC-496
alps remote-peer command BC-496
alps retry-option command BC-498
alps service-msg data-drop command BC-498
alps service-msg format command BC-498
alps service-msg-interval command BC-496
alps service-msg-list command BC-496
alps service-msg-list number command BC-500
alps service-msg status-change command BC-498
alps servlim command BC-497
alps t1 command BC-497
alps t2 command BC-497
alps translate command BC-500
alps update-circuit command BC-502
alternate endpoints VC-228
alternate gatekeeper
configuration (example) VC-286
configuration verification VC-271
ecosystem gatekeeper interoperability VC-233
AltGKInfo
in GRJ messages VC-234
in RRJ messages VC-234
AMI line, ones density IC-135
ANI/DNIS (automatic number identification/dialed number identification service)
delimiter, configuring DC-281
ANI/DNIS Delimiter for CAS Calls on CT1 feature DC-281
Annex G (X.25 over Frame Relay)
(example) WC-331
configuring WC-300
answer-address command VC-142
answer supervision reporting VC-232
antireplay security service SC-335, SC-379
AO/DI (Always On/Dynamic ISDN)
BACP and BAP negotiation DC-243
BACP default settings DC-247
called number prefix DC-247
called party number formats DC-247
clients
calls, starting DC-246
configuration (example) DC-249
configuring DC-246
interface configuration DC-246
PPP and BAP configuration DC-243
X.25 configuration DC-244
interfaces, configuring DC-246
link member receive only mode DC-246
MLP bundle
multiple links, configuring DC-246
process description DC-242
national and subscriber number formats DC-247
PPP over X.25 DC-241
servers
BACP default settings DC-248
client calls, configuring DC-247
configuring DC-247
configuring, (example) DC-250
incoming calls DC-247
MLP bundle, configuring DC-248
no outgoing option DC-247
PPP and BAP, configuring DC-244
traffic load DC-248
X.25
configuring 1
defaults 1
virtual access interface DC-241
X.25 SVC DC-240
AOC (Advice of Charge)
ISDN subscription service DC-318
See also ISDN, Advice of Charge
AOL (America Online), wholesale dial performance optimization DC-158
APN (access point name)
configuring MWC-28
description MWC-13
apollo access-group command P3C-10
apollo access-list command P3C-10
Apollo Domain
802.5 implementation P3C-2
access lists P3C-10
(example) P3C-13
addresses P3C-7
(figure) P3C-8
ARP P3C-2
ARP table P3C-12
bridging P3C-9
Cisco's implementation P3C-2
configuration
task list P3C-8
host number P3C-7
interfaces, displaying status of P3C-12
IP addresses, setting P3C-2
monitoring tasks P3C-12
network access P3C-9
network number P3C-7
paths, setting maximum P3C-11
bridging P3C-2
IP addresses, setting P3C-2
routing
concurrent P3C-9
enabling P3C-8
over WANs P3C-11
routing table entries
adding P3C-10
displaying P3C-12
update interval P3C-11
static routes, adding to routing table P3C-10
traffic, displaying statistics P3C-12
apollo maximum-paths command P3C-11
apollo network command P3C-9
apollo route command P3C-10
apollo routing command P3C-8
apollo update-time command P3C-11
APPC (Advanced Program-to-Program Communication)
connections to CTRC BC-581
PEM support for BC-586
AppleTalk
access control P2C-16to P2C-25, TC-76
access lists
cable ranges P2C-21
configuration (examples) P2C-60to P2C-70
displaying P2C-55
guidelines P2C-19
network numbers P2C-17
addresses
(example) P2C-10
definition P2C-9
network numbers P2C-9
remapping P2C-52
adjacent networks P2C-55
adjacent routers P2C-55
AEP (AppleTalk Echo Protocol) P2C-2
AppleTalk over IEEE 802.10 in VLAN, configuration (example) XC-351
ARP (Address Resolution Protocol) P2C-2
ARP table
See ARP table, AppleTalk
ATCP (AppleTalk Control Protocol) P2C-38
ATP (AppleTalk Transaction Protocol) P2C-2
AURP (AppleTalk Updated Routing Protocol) P2C-15, P2C-28
configuring P2C-28
enabling P2C-28
last-heard-from timer P2C-29
private path database, displaying P2C-55
routing update interval P2C-29
tunneling P2C-29
update-events queue, displaying P2C-55
cable range configuration (example) TC-85
cable ranges
definition P2C-9
interfaces, assigning P2C-13
remapping P2C-52
CAP P2C-33
checksums
generation and verification, disabling P2C-42
Cisco's implementation P2C-3
concurrent routing and bridging (CRB) P2C-16
configuration P2C-11
configuration (examples) P2C-57to P2C-75
CRB P2C-16
DDP P2C-2
DDR P2C-52
DDR, configuring DC-357
definition P2C-2
dialer profiles, configuring DC-432
discovery mode
(example) P2C-58
interfaces
dynamic 1
extended 1
discovery mode configuration (example) TC-85
domains P2C-49
domain router configuration P2C-50
domain router configuration (figure) P2C-50
encapsulation P2C-3, P2C-4, P2C-8, P2C-30, P2C-35
Enhanced IGRP P2C-15
active state time limit, adjusting P2C-49
bandwidth P2C-49
(example) 1
Cisco's implementation P2C-3, P2C-46
configuration (examples) P2C-59
disabling P2C-46
enabling P2C-15, P2C-28, P2C-46
features P2C-45
hello packets P2C-48
hold time P2C-48
interfaces, displaying P2C-55
neighbor adjacencies, logging P2C-49
neighbors, displaying P2C-55
route redistribution P2C-47
routing protocol, enabling P2C-46
split horizon P2C-48
topology table P2C-55
enhancements P2C-3
Ethernet card, using P2C-11
extended interface configuration (example) TC-85
extended interfaces
cable range, assigning P2C-13
configuration (example) P2C-58
proxy network numbers P2C-41
routing P2C-12, P2C-14, P2C-15
routing (example) P2C-58
zones, names P2C-13
extended network, definition P2C-8
fast switching
cache entries P2C-55
disabling XC-16
enabling XC-13
interfaces P2C-44
FDDITalk P2C-2
pre-FDDITalk packets P2C-54
filters
data packet P2C-22
(example) 1
zones 1
partial zones P2C-25
(example) 1
routing P2C-23
routing table P2C-24
routing table (example) P2C-60
routing update filters P2C-23
(example) P2C-66
establishing P2C-26
replies P2C-24
IEEE 802.10 encapsulation, enabling for XC-350
integrated routing and bridging
See AppleTalk, IRB
Inter·Poll P2C-56
interenterprise routing P2C-49
addresses, remapping P2C-52
AURP, (example) P2C-71
cable ranges, remapping P2C-52
configuration (example) P2C-76
domain information P2C-55
domain names P2C-51
domain numbers P2C-51
hop count P2C-52
interfaces P2C-51
remapping P2C-55
split horizon P2C-50
interfaces, monitoring TC-78
interface status P2C-55
internal network advertisements TC-68
Internet Router software P2C-11
internetwork parameters P2C-55
IPTalk
/etc/services file P2C-36
AppleTalk-to-IP address mapping P2C-35
configuration (example) P2C-72to P2C-75
definition P2C-33
IP encapsulation P2C-37
node identifier P2C-74
SLIP drivers P2C-33
tunneling P2C-35
UDP port numbers P2C-36
IRB P2C-16
K-Star, Shiva FastPath routers P2C-11
LANE P2C-3
load sharing, round-robin P2C-42
LocalTalk P2C-2
logical cable P2C-9
MacIP
(examples) P2C-72
addresses P2C-33
address ranges P2C-32
advantages P2C-31
clients P2C-55
clients, monitoring TC-78
configuration requirements P2C-31
definition P2C-30
disadvantages P2C-31
implementation P2C-31
servers, monitoring TC-78
traffic P2C-55
maximum paths, setting P2C-42
MIB P2C-3
monitoring tasks P2C-54
multicast address, SMDS address mapping to WC-246
name binding
See AppleTalk, NBP
name registration, task table P2C-55
services P2C-55
neighbor table, deleting entries P2C-54
network, definition P2C-9
network, monitoring TC-78
network address caution IC-179
network connectivity, testing P2C-55
network events, logging P2C-44
nondiscovery-mode interface P2C-14
nonextended interface
addresses, assigning P2C-12
routing (example) P2C-58
routing, enabling P2C-12
zone names, assigning P2C-12
nonextended interfaces
proxy network numbers P2C-41
routing P2C-15
nonextended network, definition P2C-8
over encapsulating VLAN interfaces, configuration (example) XC-339
over IEEE 802.10 encapsulation XC-349
packets P2C-35
performance tuning P2C-39
Phase 1
comparison with Phase 2 P2C-8
compatibility with Phase 2 P2C-10
definition P2C-7
Phase 2
comparison with Phase 1 P2C-8
compatibility with Phase 1 P2C-10
definition P2C-7
PPP, configuring DC-580, DC-602
pre-FDDITalk packets, enabling P2C-54
proxy network numbers
(example) P2C-75
interoperability P2C-41
responder support P2C-4, P2C-56
round-robin load sharing, enabling P2C-42
routing
(example) P2C-58
enabling
on nonextended interface dynamically 1
on nonextended interface manually 1
extended interfaces, enabling dynamically P2C-14
extended interfaces, enabling manually P2C-12
routing process P2C-15
routing protocols, specifying P2C-28
routing tables P2C-55
entries P2C-54
update filters P2C-23
update timers P2C-41
routing updates P2C-40
interval timer P2C-41
routes with no zones, advertising P2C-40
strict checking P2C-39
stub mode P2C-40
timers P2C-41
enabling P2C-28
routes with no zones, advertising P2C-40
routing updates P2C-40
strict checking 1
stub mode P2C-40
RTMP, broadcasting packets IC-175
seed router P2C-14
services, enabling TC-68
Shiva FastPath routers P2C-11
SMDS, configuring WC-250
SMRP
fast switching P2C-38
fast switching cache table P2C-54
forwarding table P2C-55
global information P2C-56
group table P2C-56
neighbor table P2C-56
port table P2C-56
routing table P2C-56
SNMP
configuration (example) P2C-71
configuring P2C-27
sockets, displaying P2C-55
defining P2C-53
displaying P2C-55
subinterface, configuring on XC-350
subinterface, routing over
VLAN, customizing XC-350
test mode, entering P2C-56
TokenTalk P2C-2
traffic P2C-55
traffic statistics, monitoring TC-78
traffic statistics, resetting P2C-54
transition mode P2C-15
(example) P2C-65
TR LANE support XC-373
tunneling IC-175
across IP-only backbone (example) IC-183
across IP-only backbone (figure) IC-184
AURP P2C-29
Cayman P2C-30
definition of IC-175
Update Routing Protocol
See AppleTalk, AURP
VLANs P2C-3
VLAN subinterfaces, routing over XC-349
WAN protocols supported P2C-3
ZIP
query interval P2C-43
reply filters
configuration (example) 1
overview 1
standard AppleTalk services P2C-2
zone information (table) TC-78
information table P2C-55
name format P2C-10
special characters P2C-10
zones, PPP access (example) DC-46
appletalk access-group command P2C-22
appletalk address command DC-609, P2C-12, WC-94
appletalk arp interval command P2C-43
appletalk arp retransmit-count command P2C-43
appletalk arp timeout command P2C-43
appletalk aurp-tickle-time command P2C-29
appletalk aurp update-interval command P2C-29
appletalk cable-range command DC-609, IC-179, P2C-13to P2C-16, P2C-27, XC-325, XC-350, XC-355
appletalk checksum command P2C-42
appletalk client-mode command DC-580, P2C-38
appletalk discovery command P2C-14, P2C-15
appletalk distribute-list in command P2C-23
appletalk distribute-list out command P2C-24
appletalk domain hop-reduction command P2C-52
appletalk domain name command P2C-51
appletalk domain remap-range command P2C-52
appletalk eigrp active-time command P2C-49
appletalk eigrp-bandwidth-percentage command P2C-49
appletalk eigrp log-neighbor-changes command P2C-49
appletalk eigrp split-horizon command P2C-48
appletalk eigrp timers command P2C-48
appletalk event-logging command P2C-27, P2C-44
appletalk free-trade-zone command P2C-26
appletalk getzonelist-filter command P2C-24
appletalk glean-packets command P2C-43
appletalk iptalk-baseport command P2C-36
appletalk lookup-type command P2C-26
appletalk macip dynamic command P2C-33
appletalk macip server command P2C-32
appletalk macip static command P2C-33
appletalk maximum-paths command P2C-42
appletalk name-lookup-interval command P2C-26
appletalk permit-partial-zones command P2C-25
appletalk pre-fdditalk command P2C-54
appletalk protocol command P2C-15, P2C-28, P2C-46
appletalk proxy-nbp command P2C-41
appletalk require-route-zones command P2C-40
appletalk route-cache command P2C-44, WC-252, XC-15, XC-16
appletalk route-redistribution command P2C-28, P2C-47
appletalk routing command P2C-12, P2C-27, P2C-46
appletalk routing eigrp command XC-325, XC-350, XC-354
appletalk rtmp jitter command P2C-41
appletalk rtmp-stub command P2C-40
appletalk send-rtmp command P2C-40
appletalk send-rtmps command TC-68
appletalk service command TC-68
appletalk static cable command P2C-53
appletalk static net command P2C-53
appletalk strict-rtmp-checking command P2C-39
appletalk timers command P2C-41
AppleTalk Transaction Protocol P2C-2
AppleTalk Transaction Protocol (ATP) P2C-2
AppleTalk Update Routing Protocol
See AppleTalk, AURP
appletalk virtual-net command DC-580, P2C-38
appletalk zip-query-interval command P2C-43
appletalk zip-reply-filter command P2C-25
appletalk zone command P2C-12, P2C-13, P2C-15, P2C-16, P2C-27, XC-325, XC-350, XC-355
application command VC-240, VC-243, VC-246, VC-247, VC-378, VC-493, VC-693
application command, in MGCP VC-187
application session command VC-379, VC-880
APPL statement
for CICS BC-579
for DB2 BC-583
label BC-583
APPN (Advanced Peer-to-Peer Networking)
See also SNASw
CMPC support BC-248, BC-674, BC-694
configuration
CMPC (examples) BC-716to BC-720, BC-724to BC-726
configuration modes FC-393
SNA-to-IP integration BC-3to BC-4
APPN (Advanced Peer-to-Peer Networking), TR LANE support XC-373
APS (automatic protection switching of Packet-over-SONET circuit)
(examples) IC-155
alarm reporting IC-133
BER thresholds IC-133
monitoring IC-133
protect interface IC-132
working interface IC-132
aps authenticate command IC-132
aps force command IC-132
aps group command IC-133
aps lockout command IC-133
aps manual command IC-133
aps protect command IC-132
aps revert command IC-133
aps timers command IC-133
aps unidirectional command IC-133
aps working command IC-132
ARA (AppleTalk Remote Access)
access control TC-70
automatic sessions, starting DC-155
automatic session startup, configuring TC-69
cables, connecting TC-67
configuration (example) TC-82
configuring TC-68
connectivity prerequisites TC-66
dedicated line (example) TC-84
guests, disabling TC-71
Inter-Poll verification tool TC-78
Kerberos security authentication TC-76
monitoring TC-77
multiuse line (example) TC-83
overview TC-65
PPP, configuring TC-66
security
CCL scripts, configuring TC-74, TC-75
internal username authentication TC-72
TACACS/ARA TC-73
TACACS username authentication (example) TC-86
servers
cabling and connections (example) TC-67
configuration (example) TC-82
lines, configuring TC-67
modems, configuring TC-67
monitoring TC-77
tunneling TC-123
one-step TC-131
two-step TC-124
X.25 client to AppleTalk network (example) TC-87
arap callback command DC-645
arap dedicated command TC-69
arap enable command DC-645, TC-68
arap net-access-list command TC-71
arap network command TC-68, TC-77
arap noguest command TC-71
arap require-manual-password command TC-70
arap timelimit command TC-69
arap use-tacacs command TC-73
arap warningtime command TC-69
arap zonelist command TC-71
ARE (all-routes explorer)
packet forwarding BC-90
area-address command P2C-94, P2C-105, P2C-114
area addresses
ISO IGRP P3C-64
area authentication command IPC-229
area default-cost command IPC-229
area nssa command IPC-229
area-password command IPC-281, P3C-78
area range command IPC-230
area routing
IS-IS P3C-68
ISO IGRP P3C-68
areas
IS-IS for CLNS
addresses P3C-74
establishing P3C-74
multihoming P3C-74
ISO CLNS
addresses P3C-64
multihoming P3C-74
ISO IGRP P3C-68
area stub command IPC-229
area tag, IS-IS P3C-73, P3C-75
area virtual-link authentication command IPC-231
ARP (Address Resolution Protocol)
ARP cache
See ARP tables
ARP table, AppleTalk P2C-2
ATM
(example) WC-105
configuration (example) WC-106
encapsulation IPC-14
IP
encapsulations, setting IPC-14
proxy ARP, description IPC-28
proxy ARP, disabling IPC-14
table, displaying contents IPC-48
timeout IPC-14
multicast address, SMDS address mapping to WC-246
overview of WC-9
See AppleTalk, ARP
SMDS broadcast messages WC-247
tables
IP
contents, displaying 1
defining static 1
ARP (Address Resolution Protocol), verifying entries (table) TC-78
ARP (AppleTalk Address Resolution Protocol) P2C-2, P2C-42
AppleTalk P2C-42
ARP, Apollo Domain P3C-2
ARP, AppleTalk P2C-2
arp arpa command IPC-14
ARP cache
See ARP table
arp command WC-247
arp probe command IPC-14
arp snap command IPC-14
ARP table
AppleTalk
entries P2C-54
gleaning P2C-43
update interval P2C-43
ARP table, Apollo Domain P3C-12
arp timeout command IPC-14
ARQ message
RAS VC-221
Ascend attributes, AV pairs (table) DC-682
ASCII
character widths, changing FC-82
dispatch character FC-86
escape character FC-78
hold character FC-78
padding FC-83
start character FC-86
stop character FC-86
ASP (asynchronous security protocol)
Cisco tunneling implementation BC-358
overview BC-361
primary and secondary role specification BC-369
virtual multidrop support BC-362
asp addr-offset command BC-369
asp role primary command BC-369
asp role secondary command BC-369
asp rx-ift command BC-369
ASSOCIATE request
asterisk, default X.28 router prompt TC-100
async-bootp command DC-149, FC-249
async default routing command DC-153
async dynamic address command DC-152, DC-852
async dynamic routing command DC-153
asynchronous group interfaces
CHAP authentication DC-36, DC-37
IP unnumbered DC-37
PAP authentication DC-36, DC-37
PPP encapsulation DC-36, DC-37
verifying DC-37
asynchronous host mobility IC-180
asynchronous host mobility, configuring DC-581
asynchronous host roaming (example) DC-581, IC-181
asynchronous interfaces
addressing methods
configuring DC-152
description DC-151
bandwidths
configuring optimal DC-160
broadcasts on DC-577
configuration options DC-26
dedicated network mode (example) DC-43
default addresses, configuring DC-151
dynamic addresses, configuring DC-151
dynamic addressing (example) DC-48
group and member (examples) DC-44
IPX loopback interfaces DC-579
large-scale dial-out (example) DC-692
low bandwidth DC-576
modem configuration (examples) DC-67
monitoring DC-44
network interface (example) DC-49
routing configuration (example) DC-577
TCP/IP header compression
(example) DC-48
configuring DC-160
troubleshooting DC-41
asynchronous interfaces, protocol functions
header compression TC-142
keepalive updates TC-142
vty lines TC-140
asynchronous mode, low-speed serial interface DC-150
asynchronous networks, frame sequencing overview BC-363
asynchronous protocol virtual multidrop support BC-362
Asynchronous Rotary Line Queueing feature DC-148
Asynchronous Transfer Mode-Data Exchange Interface
See ATM-DXI
async mode dedicated command DC-152
async mode interactive command DC-152, DC-581
AT&T latched CSU loopback, specification DC-298
ATCP (AppleTalk Control Protocol)
PPP, enabling DC-580
ATCP (AppleTalk Control Protocol), async interfaces P2C-38
ATG (address translation gateway)
(example) P3C-56
configuring P3C-38
routing table P3C-56
ATM
AAL, configuring WC-21
AAL3/4
(example) WC-107
AAL5, configuring (example) WC-98
AAL5-SNAP (example) WC-108
ABR (example) WC-100
AESA address format WC-77, WC-78
AIP
microcode WC-10
AXIS, PPP over ATM connection to WC-126
bridging, fast-switched transparent WC-55
buffer size WC-52
call setup, configuring WC-29
CES
ATM-CES port adapter, configuring CES on WC-87
CES network module, configuring CES on WC-80
clock source, configuring WC-91
overview of WC-79
virtual path shaping WC-92
See also CES (circuit emulation services) WC-79
channels, configuring WC-51
E.164 addresses WC-54
E.164 auto conversion WC-77
E1 IMA on Multiport T1/E1 ATM network module (example) WC-108
enabling WC-18
encapsulation, configuring WC-21
ESI addresses
(example) WC-103
configuring WC-31
exception-queue length WC-51
feature overview WC-5
ILMI
(example) WC-101
configuring WC-29
management
(example) 1
configuring 1
IMA
bandwidth considerations WC-76
configuring WC-59
E1 IMA on Multiport T1/E1 ATM network module (example) WC-111
groups, configuring WC-67
groups, verifying WC-71
interface, configuring WC-59
interface, verifying WC-63
restrictions WC-58
supported platforms WC-56
T1 IMA on Multiport T1/E1 ATM port adapter (example) WC-112
troubleshooting WC-75
interface types for WC-6
Inverse ARP
(example) WC-100
configuring WC-47
PVCs, configuring WC-23
IP and ARP
IP and Inverse ARP, configuring WC-47
IP multicasting, configuring WC-34
IP QoS, mapping VC-171
LFI
configuration (example) QC-334
fragment size for QC-328, QC-329
monitoring QC-332
overview QC-315
verifying QC-332
LIS WC-46
LLC/SNAP (example) WC-98
loopback mode WC-50
message identifiers WC-54
monitoring WC-96
MTU size WC-50
multicasting
IP, configuring WC-34
networks, RFC 1483 BC-108
network timing services
(example) WC-117
configuring WC-91
NSAP addresses
(example) WC-103
OAM
(example) WC-101
cells, flushing WC-96
loopback cells, configuring WC-24, WC-36
management, configuring WC-41, WC-43, WC-44
(example) 1
PPPoE over ATM (example) WC-151
PPP over ATM
Cisco proprietary (example) WC-150
description WC-119
IETF-compliant LLC encapsulated (example) WC-149
IETF-compliant MUX encapsulated (example) WC-145
NAS-Port format, configuring WC-138
RADIUS NAS-Port format WC-137
SVCs (example) WC-151
SVCs, configuring WC-128
SVCs, verifying WC-129
virtual templates WC-121
protocol addresses, configuring WC-20
protocols supported WC-9
pseudobroadcasting WC-3
PVC range
configuring WC-142
deactivating WC-143
number of PVCs in range WC-140, WC-143
point-to-point subinterface (example) WC-155
PVC within a range (example) WC-156
PVC within a range, configuring WC-144
PVC within a range, deactivating WC-144
PVCs
bit rates, configuring WC-21
broadcast packets, configuring WC-25
configuring (example) WC-98, WC-99
discovery (example) WC-100
discovery, configuring WC-22
PPPoE over ATM WC-132
traffic parameters, configuring WC-21
trap support (example) WC-101
trap support, configuring WC-24
VC classes, configuring WC-25
queue size, raw WC-52
(example) WC-106
routed bridge encapsulation
and concurrent bridging (example) WC-155
configuration (example) WC-155
configuring WC-141
overview WC-139
restrictions WC-140
security WC-140
subinterface grouping (example) WC-155
on an unnumbered interface (example) WC-155
verifying WC-141
RSVP considerations QC-265
RSVP over ATM network
See RSVP-ATM QoS Interworking
RSVP reservations, handling QC-249
SAR WC-19
serial interfaces
description WC-93
enabling WC-94
signalling
point-to-multipoint, configuring WC-33
SMDS, configuring WC-53
SONET PLIM, configuring WC-50
SSCOP
connection control timer, configuring WC-38
description WC-37
keepalive timer, configuring WC-38
poll timer, configuring WC-38
receiver windows, configuring WC-39
transmitter windows, configuring WC-39
static maps, displaying QC-362
SVC, point-to-multipoint IPC-428, IPC-430
SVCs
broadcast packets, configuring WC-37
call setup, configuring WC-29
configuring (example) WC-101, WC-103
disabling WC-39
OAM, configuring WC-44
PPP over ATM WC-128
traffic parameters, configuring WC-34
traffic shaping, configuring WC-36
VC classes, configuring WC-37
timeout intervals, configuring WC-32
transmit clock WC-48
transmit clock source WC-53
troubleshooting WC-96
UNI version override, configuring WC-32
VC classes, configuration (examples) WC-104
vci-to-vpi ratio WC-53
VCs
circuit bumping QC-353
classes, configuring WC-39, WC-40
configuring, classes WC-40
configuring, parameters WC-40
IP to ATM CoS, configuring QC-357, QC-362
limits, configuring WC-48
management, configuring WC-41, WC-42, WC-43, WC-44
per-VC CBWFQ, configuring QC-362
See also ATM VC bundles
VC status, displaying IPC-441
video
AAL1 VC-727
nonreal-time VBR SVC VC-724
over PVCs and SVCs VC-738
virtual circuits WC-8
virtual path filter WC-55
virtual path shaping WC-92
virtual templates, PPP over ATM WC-121
ATM (Asynchronous Transfer Mode)
extended label interface XC-178
forum XC-225
Forum protocols XC-142
interface, configuring XC-224
interfaces XC-168
label switches
partitioning resources XC-87
VCI table entries, creating XC-87
LANE
in VLANs XC-319
LECs XC-320
LESs XC-320
NDIS-compliant LAN drivers XC-319
ODI-compliant LAN drivers XC-319
protocol definition XC-319
LSR network configuration XC-226
MPLS subinterface XC-224
port adapter XC-137
subinterface XC-174
VCs XC-98
with LSRs, configuring XC-167
WRED XC-221
ATM, fast switching IPX P2C-120
atm aal aal3/4 command WC-54
atm-address command XC-378, XC-447, XC-453
atm arp-server self command WC-47
atm clock internal command VC-755, WC-53
atm command VC-758
ATM-DXI (Asynchronous Transfer Mode-Date Exchange Interface), encapsulation IC-87
atm-dxi map command IC-85
atm e164 auto conversion command WC-78
atm esi-address command WC-31, WC-34
atm exception-queue command WC-51
atm framing command WC-50
atm ilmi-keepalive command WC-29
atm ilmi-pvc-discovery command WC-22
ATM LANE
address
wildcards in templates XC-376
MAC address and ESI field XC-375
atm lecs-address command XC-380
atm lecs-address-default command XC-380
ATM-LSR (ATM label switch router)
adding redundancy XC-129
definition XC-116
atm manual-well-known-vc delete command XC-238
atm max-channels command WC-51
atm maxvc command WC-52
atm mid-per-vc command WC-55
atm multicast command WC-54
atm multipoint-interval command WC-34
atm multipoint-signaling (IP multicast) IPC-430
atm multipoint-signalling command WC-34
atm nsap-address command WC-31
atm oam flush command WC-96
ATM on the AIP for Cisco7500 series (examples) WC-97, WC-145
ATM port adapters
(example) WC-118
interface types WC-3
atm pvc ilmi command XC-379
ATM PVC-in-range configuration mode, summary FC-395
atm pvc qsaal command XC-379
atm pvp command WC-92
atm rate-queue command WC-50
atm rate-queue tolerance svc command WC-49
atm rawq-size command WC-52
atm route-bridge command WC-141
atm rxbuff command WC-52
atm scramble-enable command VC-739
atmsig close atm command WC-39
atm sig-traffic-shaping strict command WC-34, WC-36
atm smds-address command WC-54
atm sonet stm-1 command WC-50
ATM switches
adding redundancy XC-129
compared to an ATM label switch XC-87
functioning as an IP router XC-87
interfaces, configuring XC-118
LSC
redundancy
configuring 1
partitioning XC-128
atm txbuff command WC-53
atm uni-version command WC-32
ATM UNI version override, configuring WC-24
ATM VC bundle configuration mode, summary FC-393
ATM VC bundles
attributes, configuring QC-358
bundle management
benefits QC-351
differentiated service QC-349
IP Precedence, matching QC-349
multiple VCs QC-350
VC bundle members QC-348, QC-359
class assignment QC-359
creating QC-357
members
adding QC-359
attributes, configuring QC-360
configuring QC-360
VC class, applying to QC-360
monitoring QC-362
parameters, configuring QC-358
VC class
attaching QC-359
attributes QC-358
configuring QC-358
ATM VC class configuration mode, summary FC-394
ATM VC configuration mode, summary FC-393
ATM VC group configuration mode, summary FC-394
atm vc-per-vp command WC-53
atm video aesa command VC-740
atm vp-filter command WC-54, WC-55
attack signatures
See Cisco IOS Firewall IDS
audio prompt files VC-487
audit rule
See Cisco IOS Firewall IDS, audit rule
audit trails
CBAC messages SC-249
DNSIX facility SC-426
See also CBAC, audit trail
authen before-forward command DC-539
authentication
CAs SC-369
description VC-255
dynamic IPC-86
EIGRP, packets IPC-266
EIGRP, route IPC-265
key-chain
using for SA Agent operations FC-350
benefits SC-417
configuration information for protocols SC-421
key chains SC-420
process SC-418
protocols SC-418
types SC-418
NHRP, configuring IPC-22
of DRP queries and responses IPC-84
route SC-12
route authentication SC-417
services VC-367
user, overview SC-11
See also IKE, extended authentication; lock-and-key
authentication, MD5
See MD5 authentication
authentication command MWC-42, SC-385
authentication database
rsh FC-251
authentication proxy SC-3, SC-289
accounting SC-297
applying SC-295
cache entries, deleting SC-306
CBAC requirement SC-299
comparison with Lock-and-Key feature SC-298
compatibility
with CBAC SC-297
with NAT SC-296
with VPN SC-297
configuration tasks SC-299
denial-of-service attack protection SC-298
dynamic ACL entries, displaying SC-305
HTTP trigger SC-290
login page (figure) SC-291
login status message (figure) SC-292
maintaining SC-305
monitoring SC-305
operation
with JavaScript SC-292
without JavaScript SC-292
passwords, one-time SC-295, SC-296
prerequisites SC-299
restrictions SC-299
secure authentication SC-292
spoofing, risk of SC-298
using SC-293
verifying configuration SC-299, SC-302
authentication proxy operation using one-time passwords SC-296
authoritative time source
hardware clock FC-266
NTP FC-271
autobaud command FC-87
use with autoselect command FC-87
autocommand command DC-157, DC-173, SC-195
autocommand menu command FC-111
autocommand telnet /stream command DC-159
autocommand telnet-faststream command DC-159
auto-cost command IPC-232
auto-cut-through command VC-80
autodetect encapsulation command DC-203, DC-205, DC-269
AUTOGEN definition, SDLLC BC-445
autohangup command DC-33
AutoInstall FC-41
requirements FC-52
AutoInstall for router connections, using BC-582
Automatic Protection Switching of Packet-over-SONET Circuits
See APS
automatic receiver polarity reversal
enabling IC-58
autonomous bridging BC-41
autonomous switching
configuration (example) BC-141
source-route bridging BC-117
autonomous systems
autonomous system path comparison, disabling IPC-295
BGP
autonomous system paths to remote networks, providing IPC-294
exchange of routing information between IPC-285
definition XC-106
EBGP routing, configuring XC-164
forwarding packets XC-110
IGRP
(example) IPC-376
more than one connection to an external network IPC-213
number, gateway of last resort IPC-213
redistribution from IPC-364
system routes within IPC-213
maintaining the LFIB XC-109
number needed for EGPs IPC-3
OSPF
autonomous system network map (figure) IPC-247, IPC-381
routing for destinations outside autonomous system IPC-229
routing between XC-107
auto-polarity command IC-58
autoselect arap command DC-645
autoselect command DC-60, DC-155, TC-69
use with autobaud command FC-87
autoselect during-login command DC-60
Autoselect incoming protocol sensor DC-155
autoselect ppp command DC-641, DC-643
auto-summary (BGP) command IPC-304
auto-summary (Enhanced IGRP) command IPC-263
auto-summary (RIP) command IPC-206
auxiliary ports
asynchronous serial interfaces, configuring DC-154
AV (attribute-value) pairs
AAA server attributes DC-699
Ascend attributes DC-681
Ascend attributes (table) DC-682
map class DC-681
per-user configuration attributes DC-699
RADIUS attributes DC-681
RADIUS attributes (table) DC-700
TACACS attributes (table) DC-700
average rate shaping, configuring QC-230
AXIS (ATM switched interface shelf)
PPP over ATM connection to WC-126
B
backbone
high-speed transport VC-171
network XC-99
provider XC-102
services XC-97
backbone router
interfaces for TMS collection, setting XC-42
backbone routers, QoS functions QC-2
backup, stateless IPC-139
backup delay command DC-456, WC-194
backup enable and disable delay, specifying WC-194
backup interface command DC-455
backup interfaces
configuring WC-194
dialer profiles DC-459, DC-463
overview DC-453
See also dial backup, serial interfaces; serial interfaces
backup interfaces, Frame Relay WC-193
backup load command DC-455
backup server table
IPX, Enhanced IGRP P2C-92
BACP (Bandwidth Allocation Control Protocol)
active mode DC-664
BRI interface (example) DC-669
configuring DC-667
dialer interfaces only DC-664
BRI interface (example) DC-672
configuration (examples) DC-669to DC-672
configuration options DC-664
default parameter values, configuring DC-667
default passive mode DC-666, DC-679
default settings DC-667
dialer rotary
different dial-in numbers (example) DC-670
one dial-in number (example) DC-671
dialer support, legacy DDR DC-664, DC-677
interfaces
monitoring DC-668
physical restrictions DC-664
serial DC-664
virtual DC-664
line speeds DC-665
link types DC-665
multilink bundle creation (example) DC-670
operating environments DC-663
outgoing calls, dialer maps used for DC-668
passive mode
default DC-664
dialer rotary group (example) DC-669
virtual template interface (example) DC-670
PPP bandwidth allocation control, configuring DC-666
prerequisites DC-663
PRI (example) DC-672
temporary dialer maps DC-668
troubleshooting DC-669
bandwidth (policy-map class) command QC-89, QC-136
bandwidth command DC-665, VC-763
service policies QC-125
traffic classes QC-188, QC-192, QC-404
bandwidth consumption
IP Tax VC-165
bandwidth on demand, load threshold DC-375, DC-405
bandwidth percentage for EIGRP IPC-260
bandwidth planning
Cisco hoot and holler VC-834
bandwidth remote command VC-763
allocation
CBWFQ QC-90
IP RTP Priority QC-94
LLQ QC-98
changing QC-238
in virtual trunks XC-120
management QC-112
maximum reserved QC-95, QC-112
on XTagATM interfaces XC-128
priority command, guaranteeing with QC-102
RSVP considerations QC-263
specifying XC-127
bandwidths, AppleTalk Enhanced IGRP P2C-49
bandwidths, configuring optimal DC-160
banner exec command FC-100
banner incoming command FC-100
banner login command FC-100
banner motd command FC-99
banners
avoiding SLIP-PPP connectivity problems with FC-101
disabling or enabling on a line FC-101
(example) FC-115
incoming message FC-100
line-activation FC-100
LOGIN FC-99
message-of-the-day FC-99
on a line, disabling or enabling FC-101
SLIP-PPP DC-587
SLIP-PPP (example) DC-589
tokens DC-587
token variables FC-99
See also messages
banners, line numbers TC-14
banner slip-ppp command DC-587
banner tokens
(example) FC-115
description FC-99
Banyan VINES
in VLANs XC-321
LANE support XC-373
over ISL encapsulation XC-326
configuration (example) XC-340
See VINES
TR LANE support XC-373
battery reversal command VC-83
baud rate
session, configuring for a TC-12
terminal line, configuring for a TC-11
See also line speeds
baud rates
automatic detection, configuring FC-87
setting for a line FC-87
Bc (committed burst size), Frame Relay WC-166
beacon command IPC-516
bearer channels
E1 or T1
configuring VC-644
BECN (backward explicit congestion notification) WC-215
feedback for frame-transmission rate, enabling WC-166
FRTS QC-218
GTS QC-214
benefits XC-143
benefits of QoS enhancements
service provider benefits XC-116
BERT (bit error rate tester)
testing IC-116
BERT/TDM
configuration, verifying IC-116
configuration of IC-115
description of IC-125
E2 clock rate, configuring (example) IC-152
profile configuration (example) IC-152
best-effort service, defined QC-4
BFE (Blacker Front End)
(example) WC-340
address conventions (figure) WC-313
configuring WC-312
encapsulation WC-314
encryption WC-314
general statistics, displaying WC-319
IP address conventions (figure) WC-313
BGP (Border Gateway Protocol)
administrative distance
defaults IPC-359
setting IPC-317
advertisement interval IPC-313
aggregate routes, configuring IPC-303
(example) IPC-333
authentication on TCP connection IPC-315
automatic network number summarization, disabling IPC-304
autonomous system IPC-361
backdoor routes, configuring IPC-317
Cisco implementation IPC-285
classless interdomain routing (CIDR) IPC-286, IPC-303
community filtering IPC-304
community list matching IPC-361
Conditional Advertisement
configuration (examples) IPC-335
configuration tasks IPC-307
configuring IPC-307
overview IPC-306
troubleshooting tips IPC-308
verifying IPC-307
confederation IPC-308
configuration, BGP (examples) IPC-324to IPC-335
configuration, neighbor (example) IPC-328
configuration, route maps (example) IPC-325
configuration task list IPC-287
connections
immediately, resetting EBGP IPC-303
status, displaying IPC-324
default local preference value, changing IPC-318
enabling IPC-289
filter IPC-313
IP access (example) DC-867
IP routing table, updating IPC-317
mesh reduction
confederation method IPC-308
route reflector method IPC-309
metric translations IPC-363
multicast
See multiprotocol BGP
Multi Exit Discriminator (MED) metric IPC-302
multipath support IPC-287
multiprotocol BGP IPC-341
neighbor options IPC-305
neighbors, configuring IPC-289
neighbors, disabling IPC-316
network 0.0.0.0, redistributing IPC-318
next hop processing, disabling IPC-300
path filtering by neighbor IPC-300
peer groups
clearing IPC-323
configuring IPC-312
disabling IPC-316
displaying IPC-324
PE to CE routing sessions, configuring XC-156
prefix filtering with inbound route maps IPC-303
prefix limit IPC-313
route dampening
dampened routes, displaying IPC-323
dampening information, clearing IPC-323
description IPC-320
enabling IPC-321
factors, configuring IPC-322
flap statistics, clearing and displaying IPC-322
routes, unsuppressing IPC-323
route filtering by neighbor IPC-296
route maps IPC-361
route reflector IPC-309to IPC-312
route selection rules IPC-285
routing domain confederation IPC-308
routing sessions, configuring XC-155
supernets IPC-303
synchronization with IGPs IPC-294
TCP MD5 authentication
for a neighbor IPC-315
for a peer group IPC-314
timers, adjusting IPC-317
version, controlling IPC-302
Version 4 IPC-286
weight, configuring IPC-295
BGP (Border Gateway Protocol), policy propagation
See Policy Propagation via BGP
BGP (Border Gateway Protocol), sessions staying up IC-169
bgp always-compare-med command IPC-319
bgp bestpath as-path ignore command IPC-295
bgp bestpath med-confed command IPC-319
bgp bestpath missing-as-worst command IPC-319
bgp client-to-client reflection command IPC-312
bgp cluster-id command IPC-311
bgp confederation identifier command IPC-308
bgp confederation peers command IPC-309
bgp dampening command IPC-321
bgp default local-preference command IPC-318
bgp deterministic med command IPC-320
bgp fast-external-fallover command IPC-303
bgp log-neighbor-changes command IPC-324
bgp-policy command QC-48
bidirectional mode, Frame Relay end-to-end keepalive WC-184
billing services VC-367
binary synchronous communications
See bisync
BIND
RAS text record (example) VC-307
bindid command IPC-142
binding, DNIS-plus-ISDN-subaddress DC-193
bind-time security BC-582
bisync (binary synchronous communication)
active poll list specification BC-369
address on a contention specification BC-368
central router specification BC-369
character set specification BC-368
connection retry specification BC-369
extended addressing, non-standard address specification BC-369
frame sequencing BC-362
full-duplex mode specification BC-369
local acknowledgment peer configuration BC-370
multidrop configuration BC-360
non-standard address specification BC-369
overview BC-358
passthrough peer configuration BC-370
polling cycle specification BC-369
poll timeout specification BC-369
primary role specification BC-369
protocol options BC-368
secondary role specification BC-369
traffic encapsulation and routing BC-215, BC-358
bisync (binary synchronous communicatons), primary and secondary roles IC-88
bit control, setting for FDDI IC-56
bit settings XC-113
black box screening
See RPM, call discriminator profiles; Cisco RPM CLID/DNIS Discriminator feature
block-caller command VC-864, VC-866
blocking calls
See ISDN PRI Class of Restrictions VC-148
blocking new calls, in MGCP VC-189
boot bootldr command FC-233, FC-234
boot buffersize command FC-163, FC-164
boot config command FC-172, FC-233
BOOT environment variable
configuring FC-435
description FC-232
displaying FC-151, FC-179, FC-229
boot field
See configuration register boot field
bootfile command IPC-71
boot flash command FC-238
boot host command FC-175
boot images
description FC-178
helper FC-234
See also system images
booting
fault-tolerant strategy FC-201
Flash memory FC-197
Flash load helper FC-216
from a network server FC-199
(example) FC-200
improving load time FC-165
information, displaying FC-229
interrupting FC-236
manually
Flash memory (example) FC-238
network file (example) FC-239
ROM monitor FC-237
process FC-225
(figure) FC-228
ROM FC-201
startup configuration file FC-225
system image, selecting FC-226
booting from a network server
over Frame Relay (example) WC-216
over X.25 (example) WC-341
BOOTLDR environment variable
(example) FC-234
configuring FC-234
description FC-232
setting FC-234
boot mop command FC-240
boot network command FC-164
BOOTP
using for AutoInstall FC-42
services, accessing FC-261
BOOTP (Bootstrap Protocol) requests DC-576
configuring DC-149
boot register
See configuration register boot field
boot system command FC-200, FC-233, FC-438
boot system flash command FC-198, FC-202
boot system mop command FC-200
boot system rcp command FC-200
boot system rom command FC-201, FC-202, FC-246
boot system tftp command FC-200
bottlenecks XC-98
bounded delay XC-114
BPDUs (bridge protocol data units)
description BC-51
intervals
forward delay, adjusting BC-51
hello packets BC-51
maximum idle, adjusting BC-52
Branch Extender
See SNASw, BEX
Break key
using to enter ROM monitor mode FC-16
bridge
group
interface, assigning BC-28
number, assigning BC-28
root BC-50
tables
description BC-43
static and dynamic entries BC-43
See RSRB; SR/TLB; SRB; SRT
bridge acquire command BC-43
bridge address command BC-45
bridge bridge command BC-40
bridge circuit-group pause command BC-58
bridge circuit-group source-based command BC-58
bridge cmf command BC-58
bridge crb command BC-37, P2C-16, P2C-84, P3C-9, P3C-38
DECnet P3C-37
ISO CLNS P3C-67
VINES P3C-18
XNS P3C-124
bridge domain command BC-42
bridge forward-time command BC-51
bridge-group aging-time command BC-43
bridge-group cbus-bridging command BC-41
bridge-group circuit command BC-58
bridge group command DC-401, DC-403, DC-437
bridge-group command BC-31, BC-34, BC-178, WC-56, WC-193, XC-357, XC-358
LAPB WC-264
SMDS WC-250
bridge-group input-lsap-list command BC-47
bridge-group input-type-list command BC-47
bridge-group lat-compression command BC-42
bridge-group output-address-list command BC-46
bridge-group output-lat-service-deny command BC-49
bridge-group output-lat-service-permit command BC-49
bridge-group output-lsap-list command BC-47
bridge-group output-pattern command BC-48
bridge-group output-type-list command BC-47
bridge-group path-cost command BC-51
bridge-group priority command BC-50
bridge-group spanning-disabled command BC-52
bridge hello-time command BC-51
bridge irb command BC-38
bridge lat-service-filtering command BC-49
bridge max-age command BC-52
bridge multicast-source command BC-43
bridge priority, spanning tree BC-50
bridge priority command BC-50
bridge protocol command BC-27, BC-152, BC-179, DC-355, DC-435, WC-56
LAPB WC-264
bridge route command BC-39
bridging
over ATM, transparent WC-55
between dissimilar media
description BC-13
concurrent routing and bridging BC-37
duplicate bridge definition
(caution) BC-85
extended access list
(caution) BC-48
Frame Relay BC-34
IRB
configuring BC-37
enabling BC-38
overview BC-22
multicast address, SMDS address mapping to WC-246
SMDS WC-250
SRT overview BC-25
transparent
See SR/TLB
transparent bridging overview BC-22
X.25 BC-36
X.25, configuring WC-283
bridging domain XC-311
broadcast accounting SC-94
broadcast-and-unknown server (BUS) XC-372
broadcast command QC-358, WC-25, WC-37
broadcast queue for Frame Relay
creating WC-195
overview of WC-195
broadcast routing timer P3C-52
broadcasts
asynchronous interfaces DC-577
asynchronous serial traffic over UDP DC-171
control XC-313
domain XC-311
Layer 2 XC-312
IGRP
update frequency IPC-214
IP
and transparent bridging spanning-tree protocol IPC-33
definition IPC-31
directed IPC-31
flooding (example) IPC-60
solution to storms IPC-31
types IPC-31
IPX
forwarding P2C-133, P2C-137, P2C-147
type 20 packets P2C-135, P2C-136
management
in VLANs XC-321
Net/One P3C-122
VINES
forwarding P3C-25
serverless networks P3C-18
XNS
directed P3C-129
forwarding P3C-130
local P3C-129
broadcasts, SMDS
(example) WC-257
ARP messages WC-247
enabling WC-247
IP networks WC-251
pseudobroadcasting, configuring WC-252
broadcasts, transparent bridging (example) BC-70
BSC (Base Station Controller)
(figure) MWC-12
description MWC-12
bsc char-set command BC-368
bsc contention command BC-368
bsc dial-contention command BC-369
bsc extended-address command BC-369
bsc pause command BC-369
bsc poll-timeout command BC-369
bsc primary command BC-369
bsc retries command BC-369
bsc secondary command BC-369
bsc servlim command BC-369
BSDS (Bootstrap Data Set) BC-583
BSS (Base Station Subsystem), description MWC-12
BSTUN (Block Serial Tunneling)
ASP overvie