Home | Skip to Content | Skip to Search | Skip to Navigation | Skip to Footer |
Worldwide [change] |Register |About Cisco
Guest

Hierarchical Navigation

Cisco LAN2LAN Software

Using PVCs with XCI for NAS

Downloads

Document ID: 15020


Contents

Introduction
Prerequisites
      Requirements
      Components Used
PVCs with XCI for NAS
NetPro Discussion Forums - Featured Conversations
Related Information

Introduction

This document discusses the use of PVCs with XCI for NAS.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

This document is not restricted to specific software and hardware versions.

PVCs with XCI for NAS

If you are unable to establish a proper connection to the NAS (Novell Access Server) through a PVC using XCI for NAS, read this carefully.

Versions of the XCI for NAS release software previous to 1.01G do not support the use of PVCs (Permanent Virtual Circuits) on an X.25 PSN. For proper PVC support, use version 1.01G or later of XCI for NAS.

NetPro Discussion Forums - Featured Conversations

Networking Professionals Connection is a forum for networking professionals to share questions, suggestions, and information about networking solutions, products, and technologies. The featured links are some of the most recent conversations available in this technology.
NetPro Discussion Forums - Featured Conversations for LAN
Network Infrastructure: LAN Routing and Switching
Network Infrastructure: Getting Started with LANs

Related Information

Updated: Oct 03, 2005Document ID: 15020