Cisco LAN2LAN Software

Document ID: 15017

Contents

Introduction
Prerequisites
      Requirements
      Components Used
Server Generation
NetPro Discussion Forums - Featured Conversations
Related Information

Introduction

This document discusses LAN²LAN/X.25 NetWare v2.15/2.2 Server generation.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

This document is not restricted to specific software and hardware versions.

Server Generation

If you generate a server which contains LAN²LAN with X.25 access that runs under NetWare v2.15 or v2.2, you might find that your generation process aborts with a "Segment Overflow" message during the linking process.

This has been specifically noted when using a combination of an SMC (Western Digital) NIC and a LAN²LAN/X.25, but can occur with other types of NICs and if multiple NICs are configured in the server.

The two suggested workarounds are to first use a different NIC card if possible. Novell's NE2000 driver is known to link correctly with LAN²LAN when using X.25 access. Second, move the LAN²LAN to an external router, where the constraints imposed by v2.x file servers do not apply.

NetPro Discussion Forums - Featured Conversations

Related Information

• Technical Support & Documentation - Cisco Systems