Document ID: 15016
Contents
Introduction
Prerequisites
Requirements
Components Used
Server Generation
NetPro Discussion Forums - Featured Conversations
Related Information
Introduction
This document discusses LAN²LAN/X.25 NetWare v2.15/2.2 Server generation.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
This document is not restricted to specific software and hardware versions.
Server Generation
If you generate a server which contains LAN²LAN with X.25 access running under NetWare v2.15 or v2.2, you might find that your generation process aborts with a "Segment Overflow" message during the linking process.
This is specifically noted when using a combination of an SMC (Western Digital) NIC and a LAN²LAN/X.25, but can occur with other types of NICs and if multiple NICs are configured in the server.
The two suggested workarounds are to first use a different NIC card if possible. Novell's NE2000 driver is known to link correctly with LAN²LAN when using X.25 access. Second, move the LAN²LAN to an external router, where the constraints imposed by v2.x file servers do not apply.
NetPro Discussion Forums - Featured Conversations
| NetPro Discussion Forums - Featured Conversations for LAN |
| Network Infrastructure: LAN Routing and Switching |
| Network Infrastructure: Getting Started with LANs |
Related Information
| Updated: Nov 14, 2005 | Document ID: 15016 |