Document ID: 15000
Questions
Introduction
Why does the PC2LAN hang during an application program load?
Related Information
Introduction
This document discusses when the PC2LAN hangs during an application program load.
Refer to Cisco Technical Tips Conventions for more information on document conventions.
Q. Why does the PC2LAN hang during an application program load?
A. PC²LAN hangs after the USERID is entered during a load of the network version of Word Perfect v5.1 for Windows, because WP 5.1 grabs the COM1 interrupt from PC²LAN. A workaround for this problem is to move PC²LAN to the COM2 port or use the /x option on the WP 5.1 command line to set WP 5.1 back to its default values for the setup feature.
If you experience problems when you load similar applications in a PC²LAN, try to use another COM port. If you your application is using the COM port that you have selected for PC²LAN, check to see if there is a way to disable or change this selection.
Related Information
| Updated: Oct 04, 2005 | Document ID: 15000 |
