Setting up a 24 hours recording schedule for the PVC2300 [Cisco Small Business Video Surveillance Cameras]

Document ID: 109076

Updated: Dec 12, 2008

Introduction
How can I setup a 24 hours recording schedule for the PVC2300?
Related Information

Introduction

This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products (formerly Linksys Business Series).

Q. How can I setup a 24 hours recording schedule for the PVC2300?

You can record video while watching, or schedule recordings to occur when you are absent. Recordings are stored on the hard drive of the computer running the Monitor application. Recordings can be played using the Playback utility.

Note: Make sure that the Viewer and Recorder Utility is installed in the PC. Follow these steps:

Step 1:
Open the Monitor and enter the camera data.
Step 2:
After the Camera Setup, go to Recording Schedule.

Step 3:
Select the desired Interval settings.

Step 4:
Select desired Start Date.
Step 5:
Select desired Start Time.
Step 6:
Set Duration and set is as 24:00 hours and click Add button.
You should now see the added recording schedule.
With the schedule created, it should follow the assigned Recording Schedule made for the PVC2300.