Cisco IOS Software Releases 12.4 Special and Early Deployments

Table Of Contents

Cisco Unified Communications Manager Express Call Monitoring Interface Guide

Cisco Unified Communications Manager Express Call Monitoring Interface Guide

---

This guide provides information about the interface used for call monitoring functions between the Cisco Unified Communications Manager Express (Unified CME) and a session server. This feature is defined in part by RFC 3261, RFC 3265, and RFC 4235, along with the ECMA 323 and ECMA 269 standards.

Configuration Information

A typical configuration example for call monitoring on the Cisco Unified CME is included in this interface guide, which is located at the following URL:

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/prod_technical_reference09186a008085f708.html

For more detailed configuration information, refer to the Cisco Unified CME configuration guides, at the following URL:

http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_installation_and_configuration_guides_list.html

Command Reference Information

Command reference information is included in the Cisco IOS Voice Command Reference, Release 12.4T, at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hvr_r/index.htm

List of All Release 12.4T Commands

An alphabetical list of all Cisco IOS Release 12.4T commands is in the Cisco IOS Master Commands List, Release 12.4T, at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124mindx/124htix.htm

List of All New, Modified, Removed, and Replaced Release 12.4T Commands

Alphabetized lists of all new, modified, removed, and replaced commands for each Cisco IOS Release 12.4T release are in the Cisco IOS New, Modified, Removed, and Replaced Commands, Release 12.4T, document at the following URL:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124mindx/124htnml.htm

Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.

© 2007 Cisco Systems, Inc. All rights reserved.