Table Of Contents
Release Notes for Cisco SSL VPN Client,
CCO Date: June 17, 2005
Part Number: OL-7819-01
These release notes are for the Cisco SSL VPN Client (SVC), Release 1.0.1, running on the Cisco VPN 3000 Concentrator. The Cisco SVC provides end users running Microsoft Windows XP or Windows 2000 with the benefits of a Cisco IPSec VPN client without the administrative overhead required to install and configure an IPSec client. It supports applications and functions unavailable to a standard WebVPN connection.
These release notes describe new features, changes to existing features, limitations and restrictions, open and resolved caveats, and related documentation. They also include procedures you should follow before loading this release. The section Usage Notes describes interoperability considerations and other issues you should be aware of when installing and using the Cisco SVC. Read these release notes carefully prior to installing this software.
This document includes the following sections:
The following sections describe the system requirements for Cisco SVC Release 1.0.1.
Cisco SVC, Release 1.0.1, is supported on the following hardware platforms:
•Cisco VPN 3000 Series Concentrators, Models 3005 through 3080
•Altiga Networks VPN Concentrators, Models C10 through C60
Security Appliances and Software Supported
Table 1 shows the supported security appliances and the software that is required in order to use this SVC release.
Table 1 Platform Software Supported
Platform Required Software
Cisco VPN 3000 Series Concentrators
version 4.7 or later
Altiga Networks VPN Concentrators
version 4.7 or later
Upgrading to Release 1.0.1
This section contains information about upgrading from earlier releases to Cisco SVC, Release 1.0.1.
Before You Begin
Be aware of the following considerations before you upgrade. These are known product behaviors, and knowing about them at the beginning of the process should expedite the upgrade. Where appropriate, the number of the caveat documenting the issue appears at the end of the item. See the "Caveats" section for a description of using this number to locate a particular caveat.
Note To use the SVC, Release 1.0.1, you must upgrade the VPN Concentrator to Release 4.7 or higher. The SVC, Release 1.0.1, does not operate with the VPN Concentrator running versions earlier than version 4.7.
New Features in Release 1.0.1
This section describes the new features in SVC Release 1.0.1. For detailed instructions about how to configure and use these features, see the documentaion associated with the security appliance on which you are installing the SVC software.
NTLM Proxy Authentication
Windows NT LAN Manager (NTLM) Proxy Authentication is the authentication protocol used on networks that include systems running versions of the Microsoft® Windows NT® operating system earlier than Windows 2000, and on stand-alone systems. NTLM Proxy Authentication is a more advanced challenge/response-based protocol from its predecessor, LAN Manager (LM).
Note The SVC must support NTLM Proxy authentication in the case where there is a proxy server between the SVC (running on a PC) and the VPN 3000 Concentrator, and the proxy server is expecting NTLM Proxy Authentication instead of basic authentication. Therefore, in order for the SVC to operate properly in this scenario, you must be running SVC Release 1.0.1 or later.
This section describes installation-specific issues and procedures for SVC Release 1.0.1, and contains the following sections:
Installing SVC Software on a VPN 3000 Concentrator
To install the SVC software on a VPN Concentrator, follow these steps:
Step 1 Download the sslclient-win*.pkg file to any location on your PC.
Step 2 Install a VPN Concentrator Release 4.7 image on your VPN Concentrator.
Step 3 Navigate to the Configuration | Tunneling and Security | WebVPN | SSL VPN Client screen in the VPN Concentrator Manager.
Step 4 Click Install a new SVC.
Step 5 Click Browse and highlight the sslclient-win*.pkg file.
Step 6 Click Apply.
Step 7 Save the configuration.
Note If the VPN 3000 concentrator is configured to leave the SVC installed, and you want to uninstall the software from the workstation, go to Program Files\Cisco Systems\SSL VPN Client folder and run Uninstall.exe.
Enabling Automatic Installation of SVCs for Non-Privileged Users
Users must have Administrator privileges on client PCs that use SVC. Clients connecting without Administrator privileges cannot receive and install an SVC. However, Cisco provides an Install Enabler utility to pre-load a client service that lets non-privileged users load SVC. This utility (STCIE.EXE) is useful if you do not typically configure client PC users with Administrator privileges. It is available within the sslclient-win-220.127.116.11.zip file on your distribution media or on the VPN 3000 Concentrator download area on Cisco.com.
You must have Administrator privileges on the client PC to run the Install Enabler and install the service. Once the service is installed, it loads at system startup and facilitates SVC setup for non privileged users.
To set up the client service, unzip the sslclient-win-18.104.22.168.zip file and the start the STCIE.EXE executable file. It creates or updates the SVC in the Program Files\Cisco System folder, which the VPN 3000 concentrator pushes to the client.
The following command line switches are available:
•STCIE.EXE /? — Displays available command options.
•STCIE.EXE /HELP — Displays available command options.
•STCIE.EXE /NODLG — "Silent mode" installation; suppresses dialog boxes except for errors.
•STCIE.EXE /NODLGNOERROR — Suppresses all dialog boxes, including errors.
VPN 3000 Concentator and Automatic Installation of SVCs
The following recommendations and caveats apply to the automatic installation of SVC software on client PCs:
•To minimize user prompts during SVC setup, make sure certificate data on client PCs and on the VPN Concentrator match:
–If you are using a Certificate Authority (CA) for certificates on the VPN Concentrator, choose one that is already configured as a trusted CA on client machines.
–If you are using a self-signed certificate on the VPN Concentrator, be sure to install it as a trusted root certificate on clients.
The procedure varies by browser. See the procedures that follow this section.
–Make sure the Common Name (CN) in VPN Concentrator certificates matches the name clients use to connect to it. By default, the VPN Concentrator certificate CN field is its IP address. If clients use a DNS name, change the CN field on the VPN Concentrator certificate to that name.
•The Cisco Security Agent (CSA) may display warnings during the SVC installation.
•Cisco Security Agent (CSA) Version 4.5 and higher is the only version compatible with the Cisco Secure Desktop (CSD) and the SVC. The appropriate CSA policy ships with CSA and is attached to the group "Remote desktops and laptops." These policies are not enabled by default; you must select them to prevent the CSD and SVC from failing with CSA version 4.5.
•We recommend that Microsoft Internet Explorer (MSIE) users add the VPN 3000 Concentrator to the list of trusted sites. Doing so enables the ActiveX control to install with minimal interaction from the user. This is particularly important for users of Windows XP SP2 with enhanced security. Refer to the following sections for instructions.
Adding a VPN Concentrator to the List of Trusted Sites (IE)
Use Microsoft Internet Explorer to add a VPN Concentrator 3000 to the list of trusted sites as follows:
1. Go to Tools | Internet Options | Trusted Sites.
The Internet Options window opens.
2. Click the Security tab.
3. Click the Trusted Sites icon.
4. Click the Sites button.
The Trusted Sites window opens.
5. Type the host name or IP address of the VPN Concentrator. Use a wildcard such as https://*.yourcompany.com to allow all VPN Concentrators within the yourcompany.com domain to be used to support multiple sites.
6. Click the Add button.
7. Click the OK button.
The Trusted Sites window closes.
8. Click the OK button in the Internet Options window.
Adding a Security Certificate in Response to Browser Alert Windows
This section explains how to install a self-signed certificate as a trusted root certificate on a client in response to the browser alert windows.
In Response to a Microsoft Internet Explorer "Security Alert" Window
The following procedure explains how to install a self-signed certificate as a trusted root certificate on a client in response to a Microsoft Internet Explorer Security Alert window. This window opens when you establish a Microsoft Internet Explorer connection to a VPN Concentrator 3000 that is not recognized as a trusted site. The upper half of the Security Alert window shows the following text:Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the site's security certificate. The security certificate was issued by a company you have not chosen to trust. View the certificate to determine whether you want to trust the certifying authority.
Install the certificate as a trusted root certificate as follows:
1. Click the View Certificate button in the Security Alert window.
The Certificate window opens.
2. Click the Install Certificate button.
The Certificate Import Wizard Welcome opens.
3. Click the Next button.
The Certificate Import Wizard - Certificate Store window opens.
4. Select the "Automatically select the certificate store based on the type of certificate" option.
5. Click the Next button.
The Certificate Import Wizard - Completing window opens.
6. Click the Finish button.
Another Security Warning window prompts "Do you want to install this certificate?"
7. Click the Yes button.
The Certificate Import Wizard window indicates the import is successful.
8. Click OK to close this window.
9. Click OK to close the Certificate window.
10. Click the Yes button to close the Security Alert window.
The VPN Concentrator window opens, signifying the certificate is trusted.
In Response to a Netscape, Mozilla, or Firefox "Certified by an Unknown Authority" Window
The following procedure explains how to install a self-signed certificate as a trusted root certificate on a client in response to a "Web Site Certified by an Unknown Authority" window. This window opens when you establish a Netscape, Mozilla, or Firefox connection to a VPN Concentrator 3000 that is not recognized as a trusted site. This window shows the following text:Unable to verify the identity of <Hostname_or_IP_address> as a trusted site.
Install the certificate as a trusted root certificate as follows:
1. Click the Examine Certificate button in the "Web Site Certified by an Unknown Authority" window.
The Certificate Viewer window opens.
2. Click the "Accept this certificate permanently" option.
3. Click OK.
The VPN Concentrator window opens, signifying the certificate is trusted.
This section lists the following interoperability considerations and other issues to consider before installing and using SVC Release 1.0.1:
If there is a proxy server between the SVC (running on a PC) and the VPN 3000 Concentrator, and the proxy server is expecting NTLM authentication instead of basic authentication, the SVC must support NTLM Authentication. Therefore, you must use SVC Release 1.0.1 or later.
WINS and DNS
The SVC supports group configured primary and secondary Windows Internet Naming Services (WINS) or Domain Naming Services (DNS). In general, the IPSec Group-based parameters apply to the SVC. The exception is the Authentication, Authorization, and Accounting configuration, which is always global. The following table summarizes the group and global settings that the SVC supports.
Parameter Group Global/System-wide
DNS and WINS
MSIE Proxy Server Setting
1 In this release WebVPN does not support RADIUS with Expiry authentication.
2 If no accounting servers are defined in the group, the system servers apply.
Internet Explorer Proxy With SVC
If you have Internet Explorer configured with a proxy, you must activate the "Use HTTP 1.1 through proxy connections" setting to use the SVC. If this option is not set, the SSL VPN connection does not come up.
In Internet Explorer, choose Internet Options from the Tools menu. Click the Advanced tab, and under the HTTP 1.1 Settings, check "Use HTTP 1.1 through proxy connections."
Setting the Secure Connection (Key) Icon
The Key icon indicates a secure connection. Microsoft Windows XP automatically hides this icon among those that have not been recently used. The end user can prevent XP from hiding this icon as follows:
1. Go to the taskbar where the tray icons are displayed and right click the left angle bracket ( < ).
2. Select "Customize Notifications..."
3. Select "Cisco Systems SSL VPN Client" and set to "Always Show."
Cisco Secure Desktop and the SVC
To ensure proper operation of the SVC, follow the instructions of the DSL or cable router manufacturer to upgrade to the latest available firmware revision.
End users of the SVC who establish an SSL VPN connection should not click Launch Login Page in the CSD interface.
Cisco Security Agent Version Requirements
Cisco Security Agent (CSA) Version 4.5 and higher is the only version compatible with the SVC. The appropriate CSA policy ships with CSA and is attached to the group "Remote desktops and laptops." These policies are not enabled by default; you must select them to prevent the SVC from failing with CSA version 4.5.
PC Wireless Client Configurations
If a client wireless adapter profile supports scanning for a better access point, and you use the SSL VPN Client (SVC) or Cisco VPN Client (IPSec) with that profile, disable such scanning. These scans can cause disconnections or stall traffic on the tunnel. To support scanning for non-SVC/IPSec connections, create another profile.
Hosts File Recovery
If Application Access fails to terminate correctly when using the SVC, the hosts file may not be recovered to its previous condition. This can result from any of the following actions:
•Terminating the browser using the Task Manager
•Terminating Java processes using the Task Manager
•Shutting down the PC without closing the browser
•Logging out without closing the browser
Manually restore the hosts file to its original condition by copying the contents of webvpn.hosts to the hosts file. This restores network connectivity. The webvpn.hosts file is in the C:\WINNT (or C:\WINDOWS) \system32\drivers\etc directory.
Certificate Revocation List Processing
A certificate revocation list (CRL) contains a number of certificate serial numbers that have been revoked. The client downloads this list from a CRL server, then looks up the VPN Concentrator's certificate in the list. The client displays a window to indicate one of the following if it detects an error:
CRL server is offline
This message signifies that the server is inside a private network or is down.
Download or lookup of the CRL has failed
Therefore, the SVC requires a CertificateRevocation key with a value of 1 to enable the checking of the certificate revocation list. Otherwise, a dialog window prompts the end user to accept or deny the certificate that has the revocation error. The following path shows the CertificateRevocation key and value on the end user's PC:My Computer | HKEY_USERS | <Secure ID_of_Logged_User> | Software | Microsoft | Windows | CurrentVersion | CertificateRevocation REG_DWORD 0x00000001
The SVC attempts to read the value of the "CertificateRevocation" flag shown above to determine whether the client checks for revocation of the VPN Concentrator 3000 certificate. It logs the following application events to the system Application event log if the registry flag is missing:Function: User Secure ID: S-1-5-21-1801674531-2025429265-839522115-14761Return code: 0File: f:\temp\build\workspace\SSLClient\Agent\ssl.cppLine: 1404Description: unknownFunction: ReqQueryValueExReturn code: 2File: f:\temp\build\workspace\SSLClient\Agent\ssl.cppLine: 1435Description: The system cannot find the file specified.Function: FailedToGetCertRevocationFlagReturn code: 0xFE1B0045File: f:\temp\build\workspace\SSLClient\Agent\ssl.cppLine: 1494Description: SSL_ERROR_WINDOWS_REGISTRY_FAILED
To view the Application log, select Control Panel | Administrative Tools | Event Viewer, and select Application Log.
To restore the missing flag, select Control Panel | Internet Options, click on the Advanced tab, and do either of the following:
•Click on the Restore Defaults button near the bottom of the window.
This option restores all of the options under the Advanced tab to the original settings. To avoid doing so, use the second option.
•Insert a check mark next to "Check for server certificate revocation (requires restart)," click Apply, click OK, and restart Windows.
Zyxel Modem SSH Incompatibility
The SVC is not compatible with the Zyxel Prestige 643 V2.50 (AP.3) DSL modem running the Putty SSH protocol.
Caveats describe unexpected behavior or defects in Cisco software releases. The open caveats in Release 1.0.1 appear first in this list. The second section lists caveats that have been resolved in Release 1.0.1. Each list is sorted by identifier number. Both lists include any workarounds that are available.
Note If you have an account with CCO, you can use Bug Navigator II to find caveats of any severity for any release. To reach Bug Navigator II on CCO, select Software & Support: Online Technical Support: Software Bug Toolkit or navigate to http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl.
Open Caveats in the Cisco SSL VPN Client Release 1.0.1
Cisco SSL VPN Client (SVC) Release 1.0.1 has the following known caveats:
Intermittent SVC disconnects occur when operating behind a NetCache Proxy Server. This occurs when a client establishes an SVC connection to a Cisco VPN 3000 Concentrator through a NetCache Proxy Server.
Workaround: Increase the proxy timeout value in the NetCache Proxy Server.
When Microsoft Internet Explorer is configured for proxy autoconfiguration, the SVC download fails with both ActiveX and Java.
Workaround: Use the static configuration of the proxy settings option.
The SVC connection fails when connecting to the secure gateway via a proxy server and the Microsoft Internet Explorer proxy settings are configured for autoconfiguration.
Workaround: Use the static configuration of the proxy settings option.
The SVC may not authenticate with a transparent (implicit) proxy server.
When a proxy server is configured to use authentication (Basic, NTLM, etc.) and is also configured in a manner that it is transparent to the client, the authentication may fail. A transparent proxy server is one that the client has no knowledge of. This deployment is usually done by redirecting traffic to a proxy server via a router.
For example, the following configuration of a NetCache server would not work with the SSL VPN Client: http://www.netapp.com/tech_library/3336.html#4.2
In this configuration, the proxy server uses a non-standards-based implementation to appear like a web site instead of a proxy server with respect to authentication. The proxy server responds with a 401/WWW-Authenticate instead of the usual 407/Proxy-Authenticate that would occur in explicit proxy configurations.
Workaround: Do not use non-standard authentication mechanisms when deploying a proxy server (e.g. don't deploy a transparent proxy server and then require authentication via that proxy server).
Resolved Caveats in the Cisco SSL VPN Client Release 1.0.1
The SVC fails when NTLM authentication is enabled on ISA proxy server in the following configuration:
[Client] ---> [ISA] ---> [VPN3K] ---> [Web Server]
Need to handle URL type of proxy server configuration in Windows because the tunnel client software does not interpret URL formats like the following:
The SVC software does not support a URL-type proxy server configuration. Therefore, the SVC does not interpret URL formats like the following:
The Microsoft Internet Explorer browser does not display the restored client proxy configuration.
When a proxy server and one or more exception addresses that contain some wildcard characters are configured on the client PC, the SVC sometimes bypasses the proxy server to connect directly to the gateway. If the direct connection fails, the client connects via the proxy server.
On some PCs running Windows XP, SP1 or SP2, the SVC fails to obtain the proxy configuration from Windows. The client attempts to connect directly to the VPN gateway and fails to setup the connection.
The VPN client may not send an address renewal request to the VPN gateway before the lease duration has expired. The gateway may close the connection if the same address is no longer available.
The SVC fails to connect when the SVC configuration, pushed down by the VPN concentrator, contains split tunneling route definitions that conflict with existing routes defined on the client PC. Other conditions may also cause this problem. When this problem occurs, the following message appears:The SSL VPN Client was unable to modify the IP forwarding table. An SSL VPN connection will not be established.
If the user modifies the SVC Virtual Network Adapter IP address via the Network Connections settings in the control panel, the VPN connection will most likely no longer function, even after the VPN connection has been re-established.
Under-privileged users are able to un-install the Install Enabler.
After an SVC has been disconnected, some ending characters in the client proxy configuration may be missing. This may occur if the original proxy configuration is longer than 128 characters, and has been saved, modified and restored by the SVC.
The client computer may bluescreen or freeze during an SVC session when the SVC is experiencing heavy network traffic with mutliple applications (e.g. multiple ftp sessions). This problem is more likely to occur on multi-cpu or hyper-threading PCs.
The Cisco VPN 3000 Concentrator reports the following message, even though it actually registers the session as active:login failed, Cisco SSL VPN Client required
When a client PC establishes an SVC connection to a Cisco VPN 3000 Concentrator through a NetCache Proxy Server, intermittent disconnects occur.
When a proxy server is configured on the client PC, and that proxy server follows the specification for persistant connections as described in RFC2616, the proxy server may disconnect the client PC from a persistant connection.
The SVC connection does not pass data through a proxy server when it is 1 or more hops away from the proxy server.
The Cisco VPN 3000 Series Concentrator documentation set has not been revised for this release. It is available online through Cisco Connection Online (CCO) and www.cisco.com.
Service, Support, and Tips
For service and support for a product purchased from a reseller, contact the reseller, who offers a wide variety of Cisco service and support programs described in "Service and Support" in Cisco Information Packet shipped with your product.
Note If you purchased your product from a reseller, you can access CCO as a guest. CCO is Cisco Systems' primary real-time support channel. Your reseller offers programs that include direct access to CCO services.
For service and support for a product purchased directly from Cisco, use CCO.
The Cisco Technical Support home page includes technical tips and configuration information for the VPN Concentrator and client. Find this information at:
Cisco provides several ways to obtain documentation, technical assistance, and other technical resources. These sections explain how to obtain technical information from Cisco Systems.
You can access the most current Cisco documentation on the World Wide Web at this URL:
You can access the Cisco website at this URL:
International Cisco websites can be accessed from this URL:
Cisco documentation and additional literature are available in a Cisco Documentation CD-ROM package, which may have shipped with your product. The Documentation CD-ROM is updated regularly and may be more current than printed documentation. The CD-ROM package is available as a single unit or through an annual or quarterly subscription.
Registered Cisco.com users can order a single Documentation CD-ROM (product number DOC-CONDOCCD=) through the Cisco Ordering tool:
All users can order monthly or quarterly subscriptions through the online Subscription Store:
You can find instructions for ordering documentation at this URL:
You can order Cisco documentation in these ways:
•Registered Cisco.com users (Cisco direct customers) can order Cisco product documentation from the Networking Products MarketPlace:
•Nonregistered Cisco.com users can order documentation through a local account representative by calling Cisco Systems Corporate Headquarters (California, U.S.A.) at 408 526-7208 or, elsewhere in North America, by calling 800 553-NETS (6387).
You can submit comments electronically on Cisco.com. On the Cisco Documentation home page, click Feedback at the top of the page.
You can e-mail your comments to firstname.lastname@example.org.
You can submit comments by using the response card (if present) behind the front cover of your document or by writing to the following address:
Attn: Customer Document Ordering
170 West Tasman Drive
San Jose, CA 95134-9883
We appreciate your comments.
Obtaining Technical Assistance
Cisco provides Cisco.com, which includes the Cisco Technical Support website, as a starting point for all technical assistance. Customers and partners can obtain online documentation, troubleshooting tips, and sample configurations from the Cisco Technical Support website. Cisco.com registered users have complete access to the technical support resources on the Cisco Technical Support website, including tools and utilities.
Cisco.com offers a suite of interactive, networked services that let you access Cisco information, networking solutions, services, programs, and resources at any time, from anywhere in the world.
Cisco.com provides a broad range of features and services to help you with these tasks:
•Streamline business processes and improve productivity
•Resolve technical issues with online support
•Download and test software packages
•Order Cisco learning materials and merchandise
•Register for online skill assessment, training, and certification programs
To obtain customized information and service, you can self-register on Cisco.com at this URL:
Cisco Technical Support
Cisco Technical Support is available to all customers who need technical assistance with a Cisco product, technology, or solution. Two types of support are available: the Cisco Technical Support website and the Cisco Technical Support Escalation Center. The type of support that you choose depends on the priority of the problem and the conditions stated in service contracts, when applicable.
We categorize Cisco Technical Support inquiries according to urgency:
•Priority level 4 (P4)—You need information or assistance concerning Cisco product capabilities, product installation, or basic product configuration. There is little or no impact to your business operations.
•Priority level 3 (P3)—Operational performance of the network is impaired, but most business operations remain functional. You and Cisco are willing to commit resources during normal business hours to restore service to satisfactory levels.
•Priority level 2 (P2)—Operation of an existing network is severely degraded, or significant aspects of your business operations are negatively impacted by inadequate performance of Cisco products. You and Cisco will commit full-time resources during normal business hours to resolve the situation.
•Priority level 1 (P1)—An existing network is "down," or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation.
Cisco Technical Support Website
The Cisco Technical Support website provides online documents and tools to help troubleshoot and resolve technical issues with Cisco products and technologies. To access the Cisco Technical Support website, go to this URL:
All customers, partners, and resellers who have a valid Cisco service contract have complete access to the technical support resources on the Cisco Technical Support website. Some services on the Cisco Technical Support website require a Cisco.com login ID and password. If you have a valid service contract but do not have a login ID or password, go to this URL to register:
If you are a Cisco.com registered user, and you cannot resolve your technical issues by using the Cisco Technical Support website, you can open a case online at this URL:
If you have Internet access, we recommend that you open P3 and P4 cases online so that you can fully describe the situation and attach any necessary files.
Cisco TAC Escalation Center
The Cisco TAC Escalation Center addresses priority level 1 or priority level 2 issues. These classifications are assigned when severe network degradation significantly impacts business operations. When you contact the TAC Escalation Center with a P1 or P2 problem, a Cisco TAC engineer automatically opens a case.
To obtain a directory of toll-free Cisco TAC telephone numbers for your country, go to this URL:
Before calling, please check with your network operations center to determine the Cisco support services to which your company is entitled: for example, SMARTnet, SMARTnet Onsite, or Network Supported Accounts (NSA). When you call the center, please have available your service agreement number and your product serial number.
Obtaining Additional Publications and Information
Information about Cisco products, technologies, and network solutions is available from various online and printed sources.
•The Cisco Product Catalog describes the networking products offered by Cisco Systems, as well as ordering and customer support services. Access the Cisco Product Catalog at this URL:
•Cisco Press publishes a wide range of networking publications. Cisco suggests these titles for new and experienced users: Internetworking Terms and Acronyms Dictionary, Internetworking Technology Handbook, Internetworking Troubleshooting Guide, and the Internetworking Design Guide. For current Cisco Press titles and other information, go to Cisco Press online at this URL:
•Packet magazine is the Cisco quarterly publication that provides the latest networking trends, technology breakthroughs, and Cisco products and solutions to help industry professionals get the most from their networking investment. Included are networking deployment and troubleshooting tips, configuration examples, customer case studies, tutorials and training, certification information, and links to numerous in-depth online resources. You can access Packet magazine at this URL:
•iQ Magazine is the Cisco bimonthly publication that delivers the latest information about Internet business strategies for executives. You can access iQ Magazine at this URL:
•Internet Protocol Journal is a quarterly journal published by Cisco Systems for engineering professionals involved in designing, developing, and operating public and private internets and intranets. You can access the Internet Protocol Journal at this URL:
•Training—Cisco offers world-class networking training. Current offerings in network training are listed at this URL:
This document is to be used in conjunction with the documents listed in the "Related Documentation" section.
Copyright © 2005 Cisco Systems, Inc. All rights reserved.