VPN 3000 Series Concentrator Reference Volume I: Configuration, Release 3.6 - System Configuration [Cisco VPN 3000 Series Concentrators]

System Configuration
Configuration | System

System Configuration

System configuration means configuring parameters for system-wide functions in the VPN Concentrator.

Step 1 In the Configuration screen, click the System link. The System screen opens.

Figure 4-1 Configuration | System Screen

This section of the Manager lets you configure parameters for VPN Concentrator system-wide functions.

Servers: Identifying servers for authentication, accounting, DNS, DHCP, firewall, and NTP.
Address Management: Assigning addresses to clients as a tunnel is established.
Tunneling Protocols: Configuring PPTP, L2TP, IPSec LAN-to-LAN connections, Internet Key Exchange (IKE) proposals, and NAT Transparency.
IP Routing: Configuring static routes, default gateways, OSPF, global DHCP, DHCP Relay, redundancy (VRRP), and Reverse Route Injection (RRI).
Management Protocols: Configuring and enabling built-in servers for FTP, HTTP/HTTPS, TFTP, Telnet, SNMP, SSL, SSH, and XML.
Events: Handling system events via logs, FTP backup, SNMP traps, syslog, SMTP, and e-mail.
General: Identifying the system, setting the time and date, changing the maximum session limit, and configuring global authentication parameters.
Client Update: Automatically updates client software.
Load Balancing: Configuring virtual clusters and individual devices within virtual clusters.

See the appropriate chapter in this manual or the online help for each section.