Table of Contents

Monitoring Refresh

Administration | Monitoring Refresh

This screen lets you enable automatic refresh of all status and statistics screens in the Monitoring section of the VPN Concentrator Manager except the Event Log.

Enable

To enable automatic refresh, check the Enable check box. The box is unchecked by default.

Refresh Period

Enter the refresh period in seconds. The minimum period is 1 second. The default period is 30 seconds. The maximum period is 2000000000 seconds (about 63 years). Very short periods may affect system performance.

The refresh period timer begins after the Manager fully displays a given screen.

Apply / Cancel

To save your settings in the active configuration, click Apply. The Manager goes to the main Administration screen.

Reminder:

To save the active configuration and make it the boot configuration, click the Save Needed icon at the top of the Manager window.

To discard your settings, click Cancel. The Manager goes to the main Administration screen.