NextPort SPE and IOS Software Version Reference Table

Document ID: 24606

PDF Downloads

Related Products/Technology

• Cisco AS5800 Access Server
• Cisco AS5350 Universal Gateway
• Cisco AS5850 Universal Gateway
• Cisco AS5400 Series Universal Gateways

Introduction
Prerequisites
      Requirements
      Components Used
      Conventions
Comparing NextPort SPE and IOS Versions
      NextPort IOS Matrix
      Software Download
      More Information
Related Information

Introduction

This document provides a matrix for determining the NextPort Software Port Entity (SPE) version and NextPort Firmware/i960 version included in a particular Cisco IOS® software release and the reverse.

Use this document if you are considering upgrading Cisco IOS software, NextPort Firmware/i960 code, or SPE code.

Prerequisites

Requirements

Readers of this document should be knowledgeable of the following:

IOS version numbering. Refer to the Cisco IOS Software Roadmap for more information.
NextPort SPE version numbering. Refer to the document Understanding NextPort SPE Versions for more information.

Components Used

The information in this document is based on the software and hardware versions:

NextPort Dial Feature Cards (DFCs)
NextPort capable platforms such as AS5350, AS5400, AS5800 and AS5850

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

For more information on document conventions, see the Cisco Technical Tips Conventions.

Comparing NextPort SPE and IOS Versions

Use the table below to determine the correlation between the Cisco IOS software, NextPort (i960), and SPE versions.

For example, to determine the SPE version in Cisco IOS Software Release 12.1(5)XM5, find the row corresponding to Cisco IOS Software Release 12.1(5)XM5. On that row, you can see that the NextPort Firmware/i960 code version is 2.3.3.108 and SPE version is 6.108.

Note: The NextPort Firmware/i960 code cannot be separately upgrdaded. You must upgrade Cisco IOS software to a version including the i960 code you need. The SPE code, on the other hand, can be separately upgraded. Refer to the document Upgrading the Modem Firmware/Portware in Cisco Routers with Internal Digital Modems for more information.

Refer to the document Understanding NextPort SPE Versions for more information on NextPort version numbers.

NextPort IOS Matrix

IOS Version	NextPort Firmware/ np.ios/i960 Version	CSMv6/SPE Version
12.3(5)	3.4.28.8	8.8.1
12.3(2)T-T2	3.4.24.3	8.3
12.3(1)-(1a)	3.4.24.3	8.3
12.2(15)T1-T9	3.4.23.3	8.3
12.2(15)T	3.2.20.18	7.18.3
12.2(13)T3-T9	3.4.22.3	8.3
12.2(13)T-T2	3.2.17.16	7.16.2
12.2(11)T8-T10	3.4.23.3	8.3
12.2(11)T5	3.2.22.18	7.18.3
12.2(11)T3	3.2.20.18	7.18.3
12.2(11)T1-T2	3.2.17.16	7.16.2
12.2(11)T	3.2.14.15	7.15.3
12.2(7b)	2.3.5.108	6.108
12.2(6)-(6a)	2.3.3.108	6.108
12.2.3-12.2.5	2.3.2.106	6.106
12.2(2)XB11	3.2.22.18	7.18.3
12.2(2)XB8-XB10	2.8.18.17	7.17
12.2(2)XB7	2.8.15.16	7.16
12.2(2)XB6	2.8.11.15	7.15
12.2(2)XB4-XB5	2.8.6.11	7.11
12.2(2)XB1-XB3	2.8.6.9	7.9
12.2(2)XB	2.8.2.5	7.5
12.2(2)XA4-XA5	2.8.5.9	7.9
12.2(2)XA-XA3	2.5.0.103	6.103.11
12.2(1)c	2.3.1.103	6.103
12.2(1)a	2.3.0.103	6.103
12.2(1)XS-XS1	2.3.3.108	6.108
12.2.1	2.3.0.103	6.103
12.1(5)XV-XV3	1.3.2.85	6.85
12.1(5)XM6-XM8	2.3.5.108	6.108
12.1(5)XM5	2.3.3.108	6.108
12.1(5)XM4	2.3.1.103	6.103
12.1(5)XM3	2.3.0.103	6.103
12.1(5)XM2	2.2.1.93	6.93.5
12.1(5)XM1	2.2.0.93	6.93.5
12.1(5)XM	2.1.5.93	6.93.0
12.1(5)T-T10	1.3.4.87	6.87.0
12.1(3)XQ3	2.1.5.93	6.93.0
12.1(3)XQ-XQ2	2.1.0.89	6.89.0
12.1(3)T	1.1.6.81	6.81
12.1(1)XD1-XD2	1.1.6.81	6.81

You can also determine the Cisco IOS software images available for each platform by using the Download Software Area.

Cisco AS5400 Series Universal Gateways