Configuration Worksheets

Configuration Worksheets

Once your FastPAD is configured and is operating properly, use these worksheets to record the configuration. Make copies of the configuration worksheets on the following pages and record the configuration of each unit. In the event of network difficulties, configured parameters may be lost and are more difficult to reproduce without a written record.

System Configuration Worksheet

Parameter	Allowable Values	Default Value
Ring Frequency	20, 30, 60 Hz	20
Country Code	0-999	1
Dial Digits	2, 3, or 4	4
Link Mgmt Protocol	LMI Rev 1 ANSI T1.617 Q.933 Point to Point	LMI Rev 1
DLCI
N(ode):	1-61	1
P(ort):	0-15	1
T(imer):
N(umber)
HH:MM:SS	00:00:00 - 23:59:59	None
MONTH	1-12	None
DAY	1-31	None
YEAR	00-99	None
Min: xx kbps	5.7-19.6 kbps	8.1 kbps
Max: xx kbps	6-19.9 kbps	16 kbps
Jitter	10-255 ms	165 ms

Link Configuration Worksheet

Parameter	Allowable Values	Default Value
Bandwidth	9.6 to 128 kbps	64 kbps
HSC	BS for Base Card Composite Link or a FRAM-01 Expansion Module Slot 1-8 and Channel 1-3 (e.g. 23=channel 3 on the FRAM-01 module in slot 2
Clock	Internal/ External	External
Rate	9.6 to 128 kbps	64 kbps

Data Channel #1 Configuration Worksheet

Parameter	Allowable Values	Default Value
Data	1-5/HS/NMS
Operating Mode	TRANS, H/SDLC, ASYNC	TRANS
Rate	1.2 to 19.2 kbps (300-9600 bps NMS)	19.2 kbps
Clock Stop¹	Yes/No	Yes
Tx Clock^1.	Int or Ext	Int
CTS	ON/OFF/C-RTS	ON
DSR	ON/OFF/R-DTR	ON
DCD	ON/OFF/R-RTS	ON
CTS Delay	0-200 in increments of 10	0
Dest Switch	1-61	1
Dest Port	0-15	1
Dest Ch	1-5, HS, or Hunt	1
In Hunt Group	Yes/No	Yes
Call Retry Timer	1-30	5
Fill Character	0-FFh	0x7Eh
Enable Channel	Yes/No	No
Connect Channel	Yes/No	No
Bandwidth	Yes/No	No
Inter frame	Flag/Mark
Mode	NRZ/NRZI

¹ These fields are for SYNC mode channels only.

Data Channel #2 Configuration Worksheet

Parameter	Allowable Values	Default Value
Data	1-5/HS/NMS
Operating Mode	TRANS, H/SDLC, ASYNC	TRANS
Rate	1.2 to 19.2 kbps (300-9600 bps NMS)	19.2 kbps
Clock Stop¹	Yes/No	Yes
Tx Clock^1.	Int or Ext	Int
CTS	ON/OFF/C-RTS	ON
DSR	ON/OFF/R-DTR	ON
DCD	ON/OFF/R-RTS	ON
CTS Delay	0-200 in increments of 10	0
Dest Switch	1-61	1
Dest Port	0-15	1
Dest Ch	1-5, HS, or Hunt	1
In Hunt Group	Yes/No	Yes
Call Retry Timer	1-30	5
Fill Character	0-FFh	0x7Eh
Enable Channel	Yes/No	No
Connect Channel	Yes/No	No
Bandwidth	Yes/No	No
Inter frame	Flag/Mark
Mode	NRZ/NRZI

¹ These fields are for SYNC mode channels only.

Data Channel #3 Configuration Worksheet

Parameter	Allowable Values	Default Value
Data	1-5/HS/NMS
Operating Mode	TRANS, H/SDLC, ASYNC	TRANS
Rate	1.2 to 19.2 kbps (300-9600 bps NMS)	19.2 kbps
Clock Stop¹	Yes/No	Yes
Tx Clock^1.	Int or Ext	Int
CTS	ON/OFF/C-RTS	ON
DSR	ON/OFF/R-DTR	ON
DCD	ON/OFF/R-RTS	ON
CTS Delay	0-200 in increments of 10	0
Dest Switch	1-61	1
Dest Port	0-15	1
Dest Ch	1-5, HS, or Hunt	1
In Hunt Group	Yes/No	Yes
Call Retry Timer	1-30	5
Fill Character	0-FFh	0x7Eh
Enable Channel	Yes/No	No
Connect Channel	Yes/No	No
Bandwidth	Yes/No	No
Inter frame	Flag/Mark
Mode	NRZ/NRZI

¹ These fields are for SYNC mode channels only.

Data Channel #4 Configuration Worksheet

Parameter	Allowable Values	Default Value
Data	1-5/HS/NMS
Operating Mode	TRANS, H/SDLC, ASYNC	TRANS
Rate	1.2 to 19.2 kbps (300-9600 bps NMS)	19.2 kbps
Clock Stop¹	Yes/No	Yes
Tx Clock^1.	Int or Ext	Int
CTS	ON/OFF/C-RTS	ON
DSR	ON/OFF/R-DTR	ON
DCD	ON/OFF/R-RTS	ON
CTS Delay	0-200 in increments of 10	0
Dest Switch	1-61	1
Dest Port	0-15	1
Dest Ch	1-5, HS, or Hunt	1
In Hunt Group	Yes/No	Yes
Call Retry Timer	1-30	5
Fill Character	0-FFh	0x7Eh
Enable Channel	Yes/No	No
Connect Channel	Yes/No	No
Bandwidth	Yes/No	No
Inter frame	Flag/Mark
Mode	NRZ/NRZI

¹ These fields are for SYNC mode channels only.

Data Channel #5 Configuration Worksheet

Parameter	Allowable Values	Default Value
Data	1-5/HS/NMS
Operating Mode	TRANS, H/SDLC, ASYNC	TRANS
Rate	1.2 to 19.2 kbps (300-9600 bps NMS)	19.2 kbps
Clock Stop¹	Yes/No	Yes
Tx Clock^1.	Int or Ext	Int
CTS	ON/OFF/C-RTS	ON
DSR	ON/OFF/R-DTR	ON
DCD	ON/OFF/R-RTS	ON
CTS Delay	0-200 in increments of 10	0
Dest Switch	1-61	1
Dest Port	0-15	1
Dest Ch	1-5, HS, or Hunt	1
In Hunt Group	Yes/No	Yes
Call RetryTimer	1-30	5
Fill Character	0-FFh	0x7Eh
Enable Channel	Yes/No	No
Connect Channel	Yes/No	No
Bandwidth	Yes/No	No
Inter frame	Flag/Mark
Mode	NRZ/NRZI

¹ These fields are for SYNC mode channels only.

High Speed Data Channel Configuration Worksheet

Parameter	Allowable Values	Default Value	Configured Value
Operating Mode	Sync	Sync	Sync
Rate	1.2 to 64 kbps	19.2 kbps
Clock Stop	Yes/No	Yes
Tx Clock	Int or Ext	Int
CTS	ON/OFF	ON
DSR	ON/OFF	ON
DCD	ON/OFF	ON
CTS Delay	0-1000 in increments of 10	0
Dest Switch	1-61	1
Dest Port	0-15	1
Dest Ch	1-5, HS, or Hunt	1
In Hunt Group	Yes/No	Yes
Call Timer	1-30	5
Fill Character	0-FFh	07Eh
Enable Channel	Yes/No	No
Connect Channel	Yes/No	No
Bandwidth	Yes/No	No

NMS Data Channel Configuration Worksheet

Parameter	Allowable Values	Default Value	Configured Value
Operating Mode	ASYNC	ASYNÇ	ASYNC
Rate	300 bps to 9.6 kbps	9.6 kbps
Unit #	1	1	1

VFC-01 or VFC-03 Expansion Channel Configuration Worksheet

Expansion Slot Number
Parameter	Allowable Values	Default Value	Configured Value
Module	VFC-01 VFC-03	VFC-03
Rate	8-16 kbps	16 kbps
DTMF Detect	On/Off/0-255	On
Interface	Loop, 4W E&M, or 2W E&M	Loop
Suppression	1-5 asterisks	One asterisk
In	+6 to -31	See Note 1
Out	+6 to -31	See Note 2
Call Timer	1-30	5
In Hunt Group	A/B/No	A
Long Call Prefix	0-9, * or #	#
Auto Dial	Yes/No	No
FAX	up to 4 digits	See Note 3
Number	Up to 4 digits	None
FXOI Timeout	1-99	30
NOTES: 1. -9 for FXS, -13 for FXO, and -15 for E&M 2. -13 for FXS, -9 for FXO, -15 for E&M 3. Only used if Auto Dial=Yes and VFC-01 Module Type

FRAM-01 Expansion Channel Configuration

(Do not use this work sheet for a FRAM-01 Channel that is configured as the High Speed Composite Link)

Parameter	Allowable Values	Default Value	Configured Value
Slot #	1-8
Channel #	1-3
Mode	H/SDLC, FRMRLY	H/SDLC	H/SDLC
Rate	9.6, 12, 14.4, 16.8, 32, 48, 56, 64, 72, 96, 112, 128, 192, 256K, 384, or 512 kbps.	64 kbps
Clock Stop	YES/NO	YES
Rx Clock	INT/EXT	INT
Tx Clock	INT/EXT	INT
CTS	ON/OFF/L-RTS	ON
DSR	ON/OFF/R-DTR	ON
DCD	ON/OFF/R-RTS	ON
CTS Delay	0-1000 (in 10 millisecond increments)	0
Dest Switch	1-61	1
Dest Port	0-15	1
Dest Channel	1-5, HS, Hunt, or 11-83	1
In Hunt Group	YES/NO	YES
Call Timeout	1-30	5
Enable Channel	YES/NO	NO
Connect	YES/NO	NO
DE	YES/NO	YES
Bandwidth	YES/NO	NO
Interframe	MARK/FLAG	FLAG
Mode	NRZ/NRZI	NRZ

FRAM-01 with Frame Relay Channel

Parameter	Allowable Values	Default Value	Configured Value
Slot #	1-8
Channel #	1-3
Mode	H/SDLC, FRMRLY	H/SDLC	H/SDLC
Encoding	NRZ/NRZI	NRZ
Rate	9.6, 12, 14.4, 16.8, 32, 48, 56, 64, 72, 96, 112, 128, 192, 256K, 384, or 512 kbps.	64 kbps
Rx Clock	INT/EXT	INT
Tx Clock	INT/EXT	INT
MildC	0-512 kbps	8 kbps
SevereC	0-512 kbps	8 kbps
LMI	Disable, Auto, LMI Rev1, ANSI Annex D, Q.933 Annex A	Auto
Side	User (UNI DTE) Net (UNI DCE) Both (NNI)	Net
n-391	1-255	6
n-392	1-10	3
n393	1-10	4
t391	5-30	10
t392	5-30	15
PVC Configuration
n	1-3, L
nnn	17-991
A:Port	1-3, L
A:Port DLCI	17-991
B:Port	1-3,L
B:Port DLCI	17-991
stats	A (active), I (inactive), - (disabled)	-
A:Bc	250-128000	0
A:Be	250--2800	0
B:Bc	250-12800	0
B:Be	250-12800	0
aCIR
aPIR
bCIR
bPIR

Table of Contents

Configuration Worksheets