Table of Contents
Release Notes for the Catalyst 8510 and the
LightStream 1010 Switch for
Cisco IOS Release 12.1(19)EB
Contents
Introduction
System Requirements
New and Changed Information
Caveats
Caveat Symptoms and Workarounds
Interoperability
Y2K Compliance
Related Documentation
Obtaining Documentation
Obtaining Technical Assistance
Obtaining Additional Publications and Information
Release Notes for the Catalyst 8510 and the
LightStream 1010 Switch for
Cisco IOS Release 12.1(19)EB
August 25, 2003
Catalyst 8510 and LightStream 1010 Switch for Cisco IOS Release 12.1(19)EB
Text Part Number: OL-4672-01 Rev. A0
This document describes the features and caveats for Cisco IOS Release 12.1(19)EB software for the Catalyst 8510 and the LightStream 1010 switch.
 |
Note All information pertains to both the Catalyst 8510 and LightStream 1010 switch platforms, unless differences between the platforms are noted in the text. |
Contents
This document includes the following sections:
Introduction
The Catalyst 8510 and LightStream 1010 switch provide switched ATM connections to individual workstations, servers, LAN segments, or other ATM switches and routers using fiber-optic, unshielded twisted-pair (UTP), and coaxial cable.
|
Note The ATM switch processors (hardware version 4.0 or higher) and all port adapters can be installed in the Catalyst 5500 switch chassis. |
The Catalyst 8510 CSR belongs to a class of high-performance Layer 3 switch routers. It is optimized for the campus LAN or the intranet and provides both wirespeed Ethernet routing and switching services.
System Requirements
This section describes the system requirements for Cisco IOS Release 12.0 and includes the following sections:
Memory Requirements
Catalyst 8510 MSR and LightStream 1010
The DRAM memory configuration is 64-MB DRAM (MEM-ASP64M), which is the default for both the Catalyst 8510 and the LightStream 1010 switch platforms.
Catalyst 8510 CSR
Table 1 lists the default Flash and DRAM memory for the Catalyst 8510 CSR, as well as memory upgrade options.
Table 1 Catalyst 8510 CSR Default Memory and Upgrade Options
| Memory Type |
Catalyst 8510 CSR Defaults |
Upgrade Options |
|
Flash memory
|
16 MB
|
MEM-ASP-FLC16M=
MEM-ASP-FLC20M=
|
|
DRAM
|
64 MB
|
None
|
|
To download and store a copy of the Catalyst 8510 CSR software image, we recommend using a minimum 20 MB Flash PC Card, which will allow you to have two or more images installed at the same time.
The Catalyst 8510 CSR boots from its onboard Flash memory by default. To change this default to boot from a Flash PC Card instead, you must change the configuration register setting to 0x2102. Refer to the Layer 3 Switching Software Feature and Configuration Guide for more information.
Hardware Supported
Table 2 lists the interfaces modules supported by both the Catalyst 8510 MSR and LightStream 1010 switch in Cisco IOS Release 12.1(19)EB and their minimum software release requirements. All platform specific requirements are noted in the table. Table 3 lists this information for the Catalyst 8510 CSR.
|
Note Although minimum software versions are listed, we strongly recommend that you use the latest available software release for all Catalyst 8510 and LightStream 1010 hardware. |
Table 2 Catalyst 8510 MSR and LightStream 1010 Interface Modules and
Minimum Software Required
| Part Number |
Description |
Minimum Software Version Required |
|
WAI-OC3-4MM
|
4-port STS-3c/STM-1 multimode fiber port adapters
|
WAS1-1
|
|
WAI-OC3-4SS
|
4-port STS-3c/STM-1 single-mode fiber port adapters
|
WAS1-1
|
|
WAI-OC3-4U5
|
4-port STS-3c/STM-1 UTP-5 port adapters
|
WAS1-1
|
|
WAI-OC3-4SSLR
|
4-port STS-3c/STM-1 SMF long reach port adapters
|
WAS3-2
|
|
WAI-OC3-1S3M
|
OC-3 mix port adapter module, 1 IR+ port and 3 MM ports
|
WAS3-1
|
|
WAI-OC12-1MM
|
1-port STS-12c/STM-4c multimode fiber port adapters
|
WAS1-2
|
|
WAI-OC12-1SS
|
1-port STS-12c/STM-4c SMF port adapters
|
WAS1-1
|
|
WAI-OC12-1SSLR
|
1-port STS-12c/STM-4c SMF long reach port adapters
|
WAS3-2
|
|
WAI-ATM25-12P
|
12-port ATM 25 port adapters with 96-pin telco cable
|
WAS3-2
|
|
WAI-T3-2BNC
|
2-port DS-3 port adapters
|
WAS1-1
|
|
WAI-E3-2BNC
|
2-port E3 port adapters
|
WAS1-1
|
|
WAI-T3-4BNC
|
4-port DS-3 port adapters
|
WAS3-1
|
|
WAI-E3-4BNC
|
4-port E3 port adapters
|
WAS3-3
|
|
WAI-T1-4RJ48
|
4-port T1 (ATM) with RJ-48 interface port adapters
|
WAS3-1
|
|
WAI-E1-4RJ48
|
4-port E1 (ATM) with RJ-48 interface port adapters
|
WAS3-1
|
|
WAI-E1-4BNC
|
4-port E1 (ATM) with BNC interface port adapters
|
WAS3-1
|
|
WAI-T1C-4RJ48
|
4-port T1 (circuit emulation) with RJ-48 interface port adapters
|
WAS3-1
|
|
WAI-E1C-4RJ48
|
4-port E1 (circuit emulation) with RJ-48 interface port adapters
|
WAS3-1
|
|
WAI-E1C-4BNC
|
4-port E1 (circuit emulation) with BNC interface port adapters
|
WAS3-1
|
|
L1010-PWR-DC
|
Power supply DC
|
WAS3-1
|
|
L1010-ASP-B-FC1
|
ASP1 with FC-per-class queuing (FC-PCQ2)
|
WAS1-3
|
|
L1010-ASP-B-FCPFQ
|
ASP1 with FC-per-flow queuing (FC-PFQ3)
|
WAS4-1
|
|
L1010-ASP-C-FC1
|
Hot-swappable ASP with FC-PCQ
|
W5-5
|
|
L1010-ASP-C-FCPFQ
|
Hot-swappable multiservice switch route processor
|
W5-5
|
|
C85MS-4E1-FRRJ48
|
4-port CE1 with RJ-48c interface Frame Relay port adapters
|
W5-5
|
|
WS-X5165
|
ATM-Fabric Integration Module for the Catalyst 5500
|
W5-5
|
|
C85MS-1DS3-FRBNC
|
1-port CDS3 Frame Relay port adapter
|
W5-9
|
|
C85MS-ATM25-4P
|
4-port 25-Mbps port adapter
|
W5-9
|
|
C85MS-8T1-IMA
|
8-port T1 port adapter with IMA4
|
Catalyst 8510
S851R2-12.0.4W
LightStream 1010
SL10R2-12.0.4W
|
|
C85MS-8E1-IMA-120
|
8-port E1 port adapter with IMA
|
Catalyst 8510
S851R2-12.0.4W
LightStream 1010
SL10R2-12.0.4W
|
|
C8510-ARM-64K
|
ATM router module
|
S851R2-12.0.10W5
|
|
C8510-ACL
|
ACL6 daughter card
|
S851R2-12.0.10W5
|
|
C85GE-1X-16K=
|
1-port Gigabit Ethernet 16K
|
S851R2-12.0.10W5
|
|
C85GE-1X-64K=
|
1-port Gigabit Ethernet 64K
|
S851R2-12.0.10W5
|
|
C85FE-8T-16K=
|
8-port 10/100 Fast Ethernet with RJ-45 16K
|
S851R2-12.0.10W5
|
|
C85FE-8T-64K=
|
8-port 10/100 Fast Ethernet with RJ-45 64K
|
S851R2-12.0.10W5
|
|
C85FE-8F-16K=
|
8-port 10/100 Fast Ethernet with MT-RJ 16K
|
S851R2-12.0.10W5
|
|
C85FE-8F-64K=
|
8-port 10/100 Fast Ethernet with MT-RJ 64K
|
S851R2-12.0.10W5
|
|
C8510-TSCAM-2P
|
Traffic-shaping carrier module (TSCAM)
|
Catalyst 8510 MSR: S851R2-12107EY LightStream 1010: SL10R2-12107EY
|
|
ASP = ATM switch processor.
FC-PCQ = feature card per-class queuing.
FC-PFQ = feature card per-flow queuing.
IMA = inverse multiplexing over ATM.
The LightStream 1010 switch requires the ASP-C with FC-PFQ to support the ATM router module.
ACL = access control list.
|
Table 3 Catalyst 8510 CSR Interface Modules and Minimum Software Required
| Part Number |
Description |
Minimum Software Version Required |
| |
Route Processors, Switch Cards, and Daughter Cards |
|
C8510-SRP
|
Layer 3 switch route processor
|
12.0(1a)W5(6f)
|
|
C8510-ACL=
|
ACL daughter card
|
12.0(10)W5(18b)
|
|
|
Gigabit Ethernet Interface Modules |
|
C85GE-1X-16K
|
1-port Gigabit Ethernet 16K
|
12.0(1a)W5(6f)
|
|
C85GE-1X-64K
|
1-port Gigabit Ethernet 64K
|
12.0(1a)W5(6f)
|
|
|
Fast Ethernet Interface Modules |
|
C85FE-8T-16K
|
8-port 10/100 RJ-45 16K
|
12.0(1a)W5(6f)
|
|
C85FE-8T-64K
|
8-port 10/100 RJ-45 64K
|
12.0(1a)W5(6f)
|
|
C85FE-8F-16K
|
8-port 100-FX MT-RJ 16K
|
12.0(1a)W5(6f)
|
|
C85FE-8F-64K
|
8-port 100-FX MT-RJ 64K
|
12.0(1a)W5(6f)
|
|
Determining Your Software Release
To determine the version of Cisco IOS software currently running on either the Catalyst 8510 or the LightStream 1010 switch, log in to the switch and enter the show version EXEC command. The following is sample output from the show version command. The version number is indicated on the second line as shown below:
Cisco Internetwork Operating System Software
IOS (tm) LS1010 W5-5 Software (LS1010-WP-M), Version 12.1(19)EB
Additional command output lines include more information, such as processor revision numbers, memory amounts, hardware IDs, and partition information.
Other Firmware Code
Some of the port adapters supported on the Catalyst 8510 and LightStream 1010 switch have upgradeable FPGA and functional images. The FPGA and functional images include caveat fixes but, in most cases, it is not necessary to upgrade. The release notes that describe the caveats from the FPGA and functional images are available on the World Wide Web at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/l3sw/8540/rel_12_0/w5_6f/rel_note/fpga_rn/ind ex.htm
For information describing the firmware update process, refer to the ATM Switch Router Software Configuration Guide.
Feature Set Tables
The Cisco IOS release software is packaged in feature sets (also called software images) depending on the platform. The following tables list feature set for specific set of Cisco IOS releases:
- Table 4 lists the Cisco IOS software feature sets available for the Catalyst 8510 MSR and LightStream 1010 switch in Cisco IOS Release 12.1(19)EB to 12.1(5)EY.
- Table 5 lists the Cisco IOS software feature sets available for the Catalyst 8510 MSR and LightStream 1010 switch in Cisco IOS Release 12.1(19)EB to 12.1(6)EY.
- Table 6 lists the Cisco IOS software feature sets available for the Catalyst 8510 MSR and LightStream 1010 switch in Cisco IOS Release 12.1(19)EB to 12.1(7a)EY1 and 12.1(7a)EY1.
- Table 7 lists the Cisco IOS software feature sets available for the Catalyst 8510 MSR and LightStream 1010 switch in Cisco IOS Release 12.1(19)EB to the Cisco IOS release indicated.
Table 4 Feature Sets Supported by the Catalyst 8510 MSR and LightStream 1010 Switch for Releases 12.1(19)EB to 12.1(5)EY
| Feature Set |
12.1(19)EB to 12.1(5)EY |
|
Left-justified E.164 AFI support
|
x
|
|
SNMP1
|
x
|
|
Asynchronous support
|
x
|
|
PPP2 (SLIP3/PPP)
|
x
|
|
IP4
|
x
|
|
NTP5
|
x
|
|
TACACS+6
|
x
|
|
Telnet
|
x
|
|
Point-to-point and point-to-multipoint permanent VCCs7 and VPCs8
|
x
|
|
Point-to-point and point-to-multipoint switched VCCs and VPCs (UNI 3.0)
|
x
|
|
Point-to-point and point-to-multipoint switched VCCs and VPCs (UNI 3.1)
|
x
|
|
Point-to-point and point-to-multipoint switched VCCs and VPCs (UNI 4.0)
|
x
|
|
Multipoint-to-point UNI signaling
|
x
|
|
Soft VCCs and VPCs
|
x
|
|
VP tunneling
|
x
|
|
VPI/VCI range support in ILMI 4.0
|
x
|
|
PNNI hierarchy
|
x
|
|
ILMI version 4.0
|
x
|
|
IISP9
|
x
|
|
LANE10 client (LEC11) and LANE services (LES12/BUS13/LECS14) on ASP15
|
x
|
|
Token Ring LANE services
|
x
|
|
ATM ARP16 server on ASP
|
x
|
|
ATM ARP client on ASP
|
x
|
|
ATM tag switch router (TSR)
|
x
|
|
Port snooping
|
x
|
|
OAM17 F4 and F5
|
x
|
|
E.164 address translation
|
x
|
|
E.164 autoconversion
|
x
|
|
Circuit emulation
|
x
|
|
ATM access lists
|
x
|
|
ATM accounting
|
x
|
|
ATM RMON18
|
x
|
|
Multiple, weighted, dynamic thresholds for selective packet marking and discard
|
x
|
|
Shaped VP tunnels for CBR traffic (FC-PFQ only)
|
x
|
|
Substitution of other service categories in shaped VP tunnels (FC-PFQ feature cards only)
|
x
|
|
Dual leaky bucket policing (FC-PFQ feature cards only)
|
x
|
|
Scheduler/Service Class/PVC configuration for FC-PFQ feature cards
|
x
|
|
Logical multicast support (up to 254 leaves per output port, per point-to-multipoint VC) (FC-PFQ feature cards only)
|
x
|
|
Network clocking enhancements for smooth switchover (FC-PFQ feature cards only)
|
x
|
|
Per-VC or per-VP nondisruptive snooping (FC-PFQ feature cards only)
|
x
|
|
Support for non-zero MCR19 on ABR connections (FC-PFQ feature cards only)
|
x
|
|
Access lists on ILMI registration
|
x
|
|
CUGs
|
x
|
|
ATM soft restart
|
x
|
|
ATM accounting enhancements
|
x
|
|
CISCO-SYSLOG-MIB support
|
x
|
|
CISCO-CONFIG-COPY-MIB support
|
x
|
|
Signaling diagnostics and MIB
|
x
|
|
Supplemental AToM MIB
|
x
|
|
E1 Frame Relay port adapter
|
x
|
|
Frame Relay to ATM interworking features on the channelized E1 port adapter
|
x
|
|
Hierarchical VP tunnels
|
x
|
|
Remote logging for accounting
|
x
|
|
Tag switching VC-merge on non-UBR VP tunnels and hierarchical vp tunnels
|
x
|
|
PNNI complex node representation
|
x
|
|
Support for ATM-fabric integration module in Catalyst 5500
|
x
|
|
PNNI explicit paths
|
x
|
|
PNNI alternate link selection
|
x
|
|
Tag switching CoS
|
x
|
|
Network Clock Distribution Protocol
|
x
|
|
Simple Gateway Control Protocol
|
x
|
|
Inverse multiplexing over ATM (IMA) groups
|
x
|
|
ATM end system address (AESA) gateway
|
x
|
|
ATM overbooking
|
x
|
|
Framing overhead
|
x
|
|
NCDP MIB support
|
x
|
|
L3-ATM routing and bridging via RFC 1483 (ATM router module)20
|
x
|
|
ACL support via ACL daughter card
|
x
|
|
Point-to-point subinterfaces, only point-to-multipoint subinterfaces are supported
|
x
|
|
Power-on-diagnostics
|
x
|
|
Layer 2 transparent bridging
|
x
|
|
Layer 2 MAC learning, aging, and switching by hardware
|
x
|
|
Spanning Tree Protocol (IEEE 802.1d) support per bridge group
|
x
|
|
Spanning Tree SNMP trap support
|
x
|
|
Maximum of 64 active bridge groups
|
x
|
|
Maximum of 128 active bridge groups
|
x
|
|
Integrated routing and bridging (IRB)
|
x
|
|
Route processor redundancy21
|
x
|
|
Inter-Switch Link (ISL)-based VLAN trunking
|
x
|
|
802.1Q-based VLAN routing/bridging
|
x
|
|
IP, IPX, and IP multicast routing and forwarding
|
x
|
|
AppleTalk 1 and 2 routing
|
x
|
|
Constrained multicast flooding (CMF)
|
x
|
|
Up to 128 IP multicast groups
|
x
|
|
IP multicast routing with up to 12,000 groups (S, G)
|
x
|
|
QoS-based forwarding based on IP precedence
|
x
|
|
Load balancing among two equal-cost paths based on source and destination IP and IPX addresses
|
x
|
|
Up to six equal-cost paths for IP and IPX; per-packet load balancing for IPX
|
x
|
|
BGP (Border Gateway Protocol)
|
x
|
|
RIP and RIP II (Routing Information Protocol)
|
x
|
|
IGRP (Interior Gateway Routing Protocol)
|
x
|
|
EIGRP (Enhanced Interior Gateway Routing Protocol)
|
x
|
|
OSPF (Open Shortest Path First)
|
x
|
|
Routing protocol MIB support (OSPF, BGP)
|
x
|
|
IPX (Internet Packet Exchange) RIP and EIGRP
|
x
|
|
PIM (Protocol Independent Multicast)—sparse and dense modes
|
x
|
|
RTMP (AppleTalk Routing Table Maintenance Protocol)
|
x
|
|
AURP (AppleTalk Update-based Routing Protocol)
|
x
|
|
Secondary addressing
|
x
|
|
Static routes
|
x
|
|
Classless Interdomain Routing (CIDR)
|
x
|
|
Bundling of up to four Fast Ethernet ports in a maximum of 56 FECs
|
x
|
|
Load sharing based on source and destination IP addresses of unicast packets
|
x
|
|
ISL trunking (routing/bridging)
|
x
|
|
ISL on the Fast EtherChannel
|
x
|
|
802.1Q routing/bridging on the Fast EtherChannel
|
x
|
|
Up to 56 active FEC and GEC port channels in one system
|
x
|
|
Up to 64 active FEC and GEC port channels in one system
|
x
|
|
Bundling of up to four Gigabit Ethernet ports
|
x
|
|
MAC address filtering standard ACL
|
x
|
|
IP simple ACL (1-99, 1301-1999)
|
x
|
|
IP extended ACL (100-199, 2000-2699) TCP ACL based on TCP-precedence, TCP port number, TCP ToS, and TCP flags
|
x
|
|
IP extended ACL (100-199, 2000-2699) UDP ACL based on UPD port number
|
x
|
|
IP extended ACL (100-199, 2000-2699) ICMP ACL
|
x
|
|
IPX standard ACL (800-899) without source node
|
x
|
|
IOS ACL for control plane traffic (for example, route update filter)
|
x
|
|
Named ACL
|
x
|
|
BOOTP (Bootstrap Protocol)
|
x
|
|
CGMP (Cisco Group Management Protocol) server support
|
x
|
|
CDP (Cisco Discovery Protocol) support on Ethernet ports
|
x
|
|
DHCP (Dynamic Host Configuration Protocol) relay
|
x
|
|
HSRP (Hot Standby Routing Protocol) over 10/100 Ethernet, Gigabit Ethernet, FEC, GEC, and BVI (Bridge-Group Virtual Interface)
|
x
|
|
ICMP (Internet Control Message Protocol)
|
x
|
|
IGMP (Internet Group Management Protocol)
|
x
|
|
IPX SAP (Internet Packet Exchange Service Advertisement Protocol) and SAP filtering
|
x
|
|
SNMP (Simple Network Management Protocol)
|
x
|
|
Maximum of 32 active bridge groups with BVI
|
x
|
|
Bundling of up to four Fast Ethernet ports in a maximum of 64 FECs
|
x
|
|
UDP (User Datagram Protocol) turbo flooding
|
x
|
|
802.1q-based VLAN routing support
|
x
|
|
Route filtering
|
x
|
|
ISL support on the GEC
|
x
|
|
802.1 routing support on the GEC
|
x
|
|
Group Virtual Interface (BVI)
|
x
|
|
Support for up to 200 IPX networks on interfaces and subinterfaces
|
x
|
|
1-port packet-over-SONET OC-12c uplink port adapter with built-in ACL functionality and a 1-port enhanced Gigabit Ethernet port adapter
|
x
|
|
IS-IS routing protocol
|
x
|
|
Switching database manager
|
x
|
|
Online diagnostics providing the following types of tests:
Access tests between the route processor and the ports
Online insertion and removal (OIR) diagnostic tests
Snake tests through the switch router to ensure connectivity between the ports
|
x
|
|
SNMP = Simple Network Management Protocol.
PPP = Point-to-Point Protocol.
SLIP = Serial Line Internet Protocol.
IP = Internet Protocol.
NTP = Network Time Protocol.
TACACS+ = Terminal Access Controller Access Control System Plus.
VCCs = virtual channel connections.
VPCs = virtual path connections.
IISP = Interim-Interswitch Signaling Protocol.
LANE = LAN emulation.
LEC = LAN emulation client.
LES = LAN emulation server.
BUS = broadcast and unknown server.
LECS = LAN emulation configuration server.
ASP = ATM switch processor.
ARP = Address Resolution Protocol.
OAM = Operation, Administration, and Maintenance.
RMON = Remote Monitoring.
MCR = minimum cell rate.
You can download the Catalyst 8510 software image on a LightStream 1010 switch to support L3-ATM (through the ATM router module). However, the LightStream 1010 switch software image does not include support for the ATM router module.
redundancy
|
Table 5 Feature Sets Supported by the Catalyst 8510 MSR and LightStream 1010 Switch for Releases 12.1(19)EB to 12.1(6)EY
| Feature Set |
12.1(19)EB to 12.1(6)EY |
|
ITT enhancements
|
x
|
|
ACL on Fast EtherChannels, Gigabit EtherChannels, and BVI
|
x
|
|
Port aggregation protocol on EtherChannels
|
x
|
|
Power-on-diagnostics
|
x
|
|
Access Control Lists (ACLs) supported on the following interface types:
Gigabit EtherChannel
Fast EtherChannel
Bridge Group Virtual Interfaces
|
x
|
|
Multicast Source Discovery Protocol (MSDP)
|
x
|
|
Multicast BGP (MBGP)
|
x
|
|
Table 6 Feature Sets Supported by the Catalyst 8510 MSR and LightStream 1010 Switch for Releases 12.1(19)EB to 12.1(7a)EY1 and 12.1(7a)EY
| Feature Set |
12.1(19)EB to 12.1(7a)EY1 and 12.1(7a)EY |
|
VBR on ATM router module support
|
x
|
|
Shaped tunnel support for ATM router module
|
x
|
|
Rate limiting
|
x
|
|
ADP
|
x
|
|
Radius support (TACACS+-like authentication)
|
x
|
|
Rate limiting
|
x
|
|
Table 7 Feature Sets Supported by the Catalyst 8510 MSR and LightStream 1010 Switch
| Feature Set |
12.1
(19)
EB |
12.1
(19)
E2 |
12.1
(14)
EB1 |
12.1
(19)
E |
12.1
(14)
EB |
12.1
(14)
E1 |
12.1
(13)
EB1 |
12.1
(13)
E1 |
12.1
(12c)
EY |
12.1
(12c)
E1 |
12.1
(12c)
E |
12.1
(11b)
E1 |
12.1
(11b)
E |
12.1
(10)
EY |
12.1
(10)
E |
|
Priority soft PVC preservation on IMA bandwidth reduction
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
|
Standard signaling for Frame Relay soft PVCs
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
|
ATM threshold group enhancements
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
|
Frame Relay PVCs terminated on ATM router module
|
X
|
X
|
X
|
X
|
X
|
X
|
|
|
X
|
|
|
|
|
X
|
|
|
SONET MIB (RFC 2558)
|
X
|
X
|
X
|
X
|
X
|
X
|
|
|
X
|
|
|
|
|
X
|
|
|
Two ended soft VC configuration
|
X
|
X
|
X
|
X
|
X
|
X
|
|
|
X
|
|
|
|
|
X
|
|
|
PNNI connection trace
|
X
|
X
|
X
|
X
|
X
|
X
|
|
|
X
|
|
|
|
|
X
|
|
|
SNMP provisioning of ATM interface traps to an SNMP host
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
|
|
|
|
|
Traffic shaping on well-know VCs
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
|
|
|
|
|
SSH (Secure Shell)
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
|
X
|
|
|
|
|
|
|
|
CES switched VCs
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
|
X
|
|
|
|
|
|
|
|
SNMP Version 3
|
X
|
X
|
X
|
X
|
X
|
X
|
X
|
|
X
|
|
|
|
|
|
|
|
Point-to-multipoint soft PVCs
|
X
|
|
X
|
|
|
|
X
|
|
|
|
|
|
|
|
|
|
Overflow queuing for VBR-nrt on Frame Relay interface modules
|
X
|
|
X
|
|
|
|
X
|
|
|
|
|
|
|
|
|
|
Configuring Frame Relay frame size for Frame Relay-ATM interworking
|
X
|
|
X
|
|
|
|
X
|
|
|
|
|
|
|
|
|
|
Soft-PVC support on ATM 0 interface
|
X
|
|
X
|
|
|
|
X
|
|
|
|
|
|
|
|
|
|
RFC-2515 support
|
X
|
|
X
|
|
|
|
X
|
|
|
|
|
|
|
|
|
|
Traffic parameter modification for soft VCs and soft VPs
|
X
|
|
X
|
|
|
|
X
|
|
|
|
|
|
|
|
|
|
SNMP support for ARM subinterface
|
X
|
X
|
X
|
X
|
X
|
X
|
|
|
|
|
|
|
|
|
|
|
CES MIB
|
X
|
|
X
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SSH server Version 2
|
X
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Release Names, Versions, and Part Numbers
Table 8 lists the release names, versions, and part numbers used with the Catalyst 8510 MSR and LightStream 1010 switch. Platform-specific information is noted in the table.Table 9 lists the release names, versions, and part numbers used with the Catalyst 8510 CSR.
Table 8 Release Name to Version to Part Number Matrix for Catalyst 8510 MSR and LightStream 1010
| Release Name |
Release Version |
Part Number |
Part Number for SSH 3DES |
|
W5
|
12.1(5)EY1
|
Catalyst 8510 MSR: S851R2-12105EY
LightStream 1010: SL10R2-12105EY
|
|
|
W6
|
12.1(6)EY
|
Catalyst 8510 MSR: S851R2-12106EY
LightStream 1010: SL10R2-12106EY
|
|
|
W7a
|
12.1(7a)EY
|
Catalyst 8510 MSR: S851R2-12107EY
LightStream 1010: SL10R2-12107EY
|
|
|
W7a
|
12.1(7a)EY1
|
Catalyst 8510 MSR: S851R2-12107EY
LightStream 1010: SL10R2-12107EY
|
|
|
10E
|
12.1(10)E
|
Catalyst 8510 MSR: S851R2-12110E
LightStream 1010: SLSR2-12110E
|
|
|
10EY
|
12.1(10)EY
|
Catalyst 8510 MSR: S851R2-12110EY
LightStream 1010: SLSR2-12110EY
|
|
|
11bE
|
12.1(11)E
|
Catalyst 8510 MSR: S851R2-12111E
LightStream 1010: SLSR2-12111E
|
|
|
11bE1
|
12.1(11)E1
|
Catalyst 8510 MSR: S851R2-12111E1
LightStream 1010: SLSR2-12111E1
|
|
|
12cE
|
12.1(12c)E
|
Catalyst 8510 MSR: S851R2-12112E
LightStream 1010: SLSR2-12112E
|
|
|
12cE1
|
12.1(12c)E1
|
Catalyst 8510 MSR: S851R2-12112E1
LightStream 1010: SLSR2-12112E1
|
|
|
12cEY
|
12.1(12c)EY
|
Catalyst 8510 MSR: S851R2-12112EY
LightStream 1010: SLSR2-12112EY
|
|
|
13E1
|
12.1(13)E1
|
Catalyst 8510 MSR: S851R2-12113E1
LightStream 1010: SLSR2-12113E1
|
|
|
13EB1
|
12.1(13)EB1
|
Catalyst 8510 MSR: S851R2-12113EB1
LightStream 1010: SLSR2-12113E1B
|
|
|
14E1
|
12.1(14)E1
|
Catalyst 8510 MSR: S851R2-12114E1
LightStream 1010: SLSR2-12114E1
|
|
|
14EB
|
12.1(14)EB
|
Catalyst 8510 MSR: S851R2-12114EB
LightStream 1010: SLSR2-12114EB
|
|
|
19E
|
12.1(19)E
|
Catalyst 8510 MSR: S851R2-12119E
LightStream 1010: SLSR2-12119E
|
|
|
14EB1
|
12.1(14)EB1
|
Catalyst 8510 MSR: S851R2-12114EB1
LightStream 1010: SLSR2-12114EB1
|
|
|
19E2
|
12.1(19)E2
|
Catalyst 8510 MSR: S851R2-12119E2
LightStream 1010: SLSR2-12119E2
|
|
|
19EB
|
12.1(19)EB
|
Catalyst 8510 MSR: S851R2-12119EB
LightStream 1010: SLSR2-12119EB
|
Catalyst 8510 MSR: S851R2K2-12119EB
LightStream 1010: SLSR2K2-12119EB
|
|
Table 9 Release Name to Version to Part Number Matrix for Catalyst 8510 CSR Switch Routers
| Release Name |
Release Version |
Part Number |
|
W5
|
12.1(5)EY1
|
S851R3-12105EY
|
|
W6
|
12.1(6)EY
|
S851R3-12106EY
|
|
W7a
|
12.1(7a)EY
|
S851R3-12107EY
|
|
W7a
|
12.1(7a)EY1
|
S851R3-12107EY
|
|
10E
|
12.1(10)E
|
S851R3-12110E
|
|
10EY
|
12.1(10)EY
|
S851R2-12110EY
|
|
11bE
|
12.1(11)E
|
S851R2-12111E
|
|
11bE1
|
12.1(11)E1
|
S851R2-12111E1
|
|
12cE
|
12.1(12c)E
|
S851R2-12112E
|
|
13E1
|
12.1(13)E1
|
S851R2-12113E1
|
|
14E1
|
12.1(14)E1
|
S851R2-12114E1
|
|
19E
|
12.1(19)E
|
S851R2-12119E
|
|
19E2
|
12.1(19)E2
|
S851R2-12119E2
|
|
New and Changed Information
This section includes new features that appear in this and previous releases of Cisco IOS release 12.1 software. The new features are sorted by release number.
New Features in Release 12.1(19)EB
Catalyst 8510 MSR
The following new feature is available for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(19)EB:
New Features in Release 12.1(19)E2
Catalyst 8510 MSR and LightStream 1010
There are no new features for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(19)E2.
Catalyst 8510 CSR
There are no new features for the Catalyst 8510 CSR in Cisco IOS Release 12.1(19)E2.
New Features in Release 12.1(14)EB1
Catalyst 8510 MSR and LightStream 1010
There are no new features for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(14)EB1.
New Features in Release 12.1(19)E
Catalyst 8510 MSR and LightStream 1010
There are no new features for the Catalyst 8510 MSR in Cisco IOS Release 12.1(19)E.
Catalyst 8510 CSR
There are no new features for the Catalyst 8510 CSR in Cisco IOS Release 12.1(19)E.
New Features in Release 12.1(14)EB
Catalyst 8510 MSR and LightStream 1010
The following new features are available for the Catalyst 8510 MSR in Cisco IOS Release 12.1(14)EB:
- RFC1406 enhancements for CES-Provides SNMP support for:
-
- Read and write access to CES interface related objects using dsx1ConfigTable (CSCdv46424)
- Read access to DS0 time slot or slots using dsx1FracTable (CSCin18227)
- Read access to NSAP address configuration of the circuit using ciscoAtmIfSoftVcDestAddress of CISCO-ATM-IF-MIB (CSCdz32265)
New Features in Release 12.1(14)E1
Catalyst 8510 MSR and LightStream 1010
The following new feature is available for the Catalyst 8510 MSR in Cisco IOS Release 12.1(14)E1:
- SNMP support for ARM sub interface
Catalyst 8510 CSR
There are no new features for the Catalyst 8510 CSR in Cisco IOS Release 12.1(14)E1.
New Features in Release 12.1(13)EB1
Catalyst 8510 MSR and LightStream 1010
The following new features are available for the Catalyst 8510 MSR in Cisco IOS Release 12.1(13)EB1:
- Point-to-multipoint soft PVCs
- Overflow Queuing for VBR-nrt on Frame Relay interface modules
- Configuring Frame Relay frame size for Frame Relay-ATM interworking
- Configuring service class overbooking
- Soft-PVC support on ATM 0 interface
- RFC-2515 support
- Traffic parameter modification for soft VCs and soft VPs
New Features in Release 12.1(13)E1
Catalyst 8510 MSR and LightStream 1010
There are no new features for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(13)E1.
Catalyst 8510 CSR
There are no new features for the Catalyst 8510 CSR in Cisco IOS Release 12.1(13)E1.
New Features in Release 12.1(12c)EY
Catalyst 8510 MSR and LightStream 1010
The following new features are available for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(12c)EY:
- SSH (Secure Shell)
- Circuit emulation service (CES) switched VCs
- SNMP Version 3
Catalyst 8510 CSR
There are no new features for the Catalyst 8510 CSR in Cisco IOS Release 12.1(12c)EY.
New Features in Release 12.1(12c)E1
Catalyst 8510 MSR and LightStream 1010
There are no new features for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(12c)E1.
Catalyst 8510 CSR
There are no new features for the Catalyst 8510 CSR in Cisco IOS Release 12.1(12c)E1.
New Features in Release 12.1(12c)E
Catalyst 8510 MSR and LightStream 1010
The following new features are available for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(12c)E:
- SNMP provisioning of ATM interface event traps to an SNMP host
- Traffic shaping on well-known VCs
Catalyst 8510 CSR
There are no new features for the Catalyst 8510 CSR in Cisco IOS Release 12.1(12c)E.
New Features in Release 12.1(11b)E1
Catalyst 8510 MSR and LightStream 1010
There are no new features for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(11b)E1.
Catalyst 8510 CSR
There are no new features for the Catalyst 8510 CSR in Cisco IOS Release 12.1(11b)E1.
New Features in Release 12.1(11b)E
Catalyst 8510 MSR and LightStream 1010
There are no new features for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(11b)E.
Catalyst 8510 CSR
There are no new features for the Catalyst 8510 CSR in Cisco IOS Release 12.1(11b)E.
New Features in Release 12.1(10)EY
Catalyst 8510 MSR and LightStream 1010
The following features are available for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(10)EY:
- MPLS LDP (Label Distribution Protocol) support for both LSR (label switch router) and LER
- MPLS LER on the 10/100BASE-TX, 100BASE-FX interface modules
- Frame Relay PVCs terminated on ATM router module
- SONET MIB (RFC 2558)
- Two ended soft VC configuration
- PNNI connection trace
Catalyst 8510 CSR
There are no new features for the Catalyst 8510 CSR in Cisco IOS Release 12.1(10)EY.
New Features in Release 12.1(10)E
Catalyst 8510 MSR and LightStream 1010
The following features are available for the Catalyst 8510 MSR and LightStream 1010 switch routers in
Cisco IOS Release 12.1(10)E:
- Priority soft PVC preservation on IMA bandwidth reduction
- Standard signalling for Frame Relay soft PVCs
- ATM threshold group enhancements
Catalyst 8510 CSR
There are no new features for the Catalyst 8510 CSR in Cisco IOS Release 12.1(10)E.
New Features in Release 12.1(7a)EY1
Catalyst 8510 MSR and LightStream 1010
There are no new features for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(7a)EY1.
Catalyst 8510 CSR
There are no new features for the Catalyst 8510 CSR in Cisco IOS Release 12.1(7a)EY1.
New Features in Cisco IOS Release 12.1(7a)EY
Catalyst 8510 MSR and LightStream 1010
The following features are available for the Catalyst 8510 and LightStream 1010 switch routers in Cisco IOS Release 12.1(7a)EY:
- VBR on ATM router module support
- Shaped tunnel support for ATM router module
- Rate limiting
- Traffic-shaping carrier module (TSCAM)
- ADP
- Radius support (TACACS+-like authentication)
Catalyst 8510 CSR
The following new features are available for the Catalyst 8510 CSR in Cisco IOS Release 12.1(7a)EY.
- Multiprotocol Label Switching (MPLS), Label Edge Router (LER) on Gigabit Ethernet interface modules and POS uplinks
- IP QoS support on Gigabit Ethernet interface modules
- CiscoView autonomous device package (ADP)
- Policy based routing (PBR)
- Rate limiting and per port traffic shaping
New Features in Cisco IOS Release 12.1(6)EY
Catalyst 8510 MSR and LightStream 1010
The following new feature is available for the Catalyst 8510 MSR and LightStream 1010 switch routers in Cisco IOS Release 12.1(6)EY:
Catalyst 8510 CSR
The following new feature is available for the Catalyst 8510 CSR in Cisco IOS Release 12.1(6)EY:
- Access Control Lists (ACLs) supported on the following interface types:
-
- Gigabit EtherChannel
- Fast EtherChannel
- Bridge Group Virtual Interfaces
- Multicast Source Discovery Protocol (MSDP)
- Multicast BGP (MBGP)
New Features in Cisco IOS Release 12.1(5)EY1
Catalyst 8510 MSR and LightStream 1010
The following new feature is available for the Catalyst 8510 MSR and the LightStream 1010 switch in Cisco IOS Release 12.1(5)EY1:
Catalyst 8510 CSR
The following new feature is available for the Catalyst 8510 CSR in Cisco IOS Release 12.1(5)EY1:
- Port aggregation protocol on EtherChannels
Caveats
This section lists the caveats and corrected caveats for each release. Use Table 10 to determine the status of a particular caveat for the Catalyst 8510 MSR or the LightStream 1010 and its relevancy to your software release. InTable 10, "C" indicates a fixed or closed caveat, and "O" indicates an open or unresolved caveat. Platform specific caveats are appropriately indicated.
Table 10 Caveat Matrix for Catalyst 8510 MSR and LightStream 1010
