Document ID: 17655
Contents - Knowledge Base Article C000211
Contents
Introduction
Prerequisites
Requirements
Components Used
Conventions
USRobotics ISDN Courier I-Everything
Summary
Affected Products
Affected Versions
More Information
Related Information
Introduction
This document discusses USRobotics ISDN Courier I-Everything.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
This document is not restricted to specific software and hardware versions.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.
USRobotics ISDN Courier I-Everything
Summary
Correct dip switch settings and a chat script example.
Affected Products
|
900i 1200i 1220i 1250i 1270i 2600i 2900i |
2200R 2220R 2250R 2270R 3500R 3800R VSR-2 VSR-8 |
Affected Versions
All Versions
More Information
Dip switches 1 and 2 must be ON (DOWN) for the Modem. These are supposed to be the defaults, but we've found that some of the documentation diagrams on the modem are incorrect. These two switches enable AT commands and Loading data from NVRAM.
Here is a chat script that has worked:
send at*D0=1 send at*V2=5 send at*p=3 send atd xxxxxx ----PID#
Related Information
| Updated: Jun 17, 2004 | Document ID: 17655 |