Cisco 700 Series ISDN Access Routers

>set systemname HQ 

!--- Sets the system name of the main router. 
!--- This system name "HQ" must match the user profile in the remote 
!--- site router for authentication purposes. The system name is sent to 
!--- the far end router as the userid during PPP authentication. 

HQ>set ppp secret client (prompts for PAP password)

!--- Sets the PAP password
!--- sent to the remote router when the remote router challenges 
!--- the main router. 

Enter Password: happy 

!--- Prompted to enter the password/secret.  
!--- Enter "happy" as the PAP password. 

ReEnter Password: happy 

!--- Prompted to re-enter the password/secret to ensure consistency. 

HQ>set encapsulation ppp

!--- Sets the encapsulation for the user profile default template to PPP.

HQ>set ppp authentication incoming pap 

!--- Sets the PPP authentication for incoming calls to use PAP.

HQ>cd lan 

!--- Change to LAN profile.

HQ:LAN>set bridging off 

!--- Turns bridging off in the LAN profile. 

HQ:LAN>set ipx routing on

!--- Turns IPX routing on. 

HQ:LAN>set ipx framing 802.3

!--- Sets the IPX framing type to 802.3. 

HQ:LAN>set ipx rip update periodic 

!--- Sends the ipx rip and sap tables out the ethernet port every 60 seconds.

HQ:LAN>set user remote 

!--- Creates the user profile "remote". Changes to the user profile "remote". 
!--- This user profile name must match the system name of the remote  
!--- site router. The system name is received from the far end as the userid 
!--- during PPP authentication. 

HQ:remote>set bridging off

!--- Turns bridging off in the user profile "remote".

HQ:remote>set timeout 120

!--- Sets the idle timeout parameter to 120 seconds. If there is no 
!--- interesting traffic to be forwarded across the ISDN connection for 120 
!--- seconds then the call is disconnected. Because the ipx rip updates are 
!--- periodic by default on the user profile, the call will never disconnect. 
!--- There are no ipx filters available at this time. 

HQ:remote>set ipx routing on 

!--- Turns ipx routing on in the user profile "remote".

HQ:remote>set ipx framing 802.3 

!--- Sets ipx framing type to 802.3.

HQ:remote>set ipx network AFAF

!--- Sets the ipx network number of the user profile "remote". 
!--- Note: The far end router is in the same ipx network as this interface. 

HQ:remote>set ipx spoofing 60 (in minutes)

!--- Sets the ipx watchdog spoofing to 60 minutes. If the call disconnects, 
!--- the users' logins will be spoofed to the main site servers for 60 minutes. 
!--- If the connection is not made before the 60 minutes, then the spoofing ends 
!--- and the router will no longer answer the server's watchdog packets. 
!--- At this point the user's session will be closed. 

HQ:remote>set ppp password host (promts for pap password) 

!--- Sets the pap secret that the main router is expecting the remote router 
!--- to send when the main router challenges the remote router to authenticate. 

Enter Password: doc 

!--- Prompted to enter password/secret. 
!--- Enter "doc" as the PAP password. 

ReEnter Password: doc 

!--- Prompted to re-enter password/secret.

HQ:remote>set ppp authentication outgoing PAP

!--- Sets the PPP authentication on outbound calls to PAP. 
!--- This setting will force bi-directional authentication using PAP on the 
!--- outgoing call basis. When the main router calls the remote router, 
!--- the main router will force the remote router to authenticate with 
!--- it using PAP. 

>set systemname remote  

!--- Sets the system name of the remote router. 
!--- This system name "remote" must match the user profile in the main 
!--- site router for authentication purposes. The system name is sent to the 
!--- far end router as the userid in PPP authentication.
    
remote>set ppp password client (prompts for PAP password)  

!--- Sets the PAP password used to send the PAP magic number 
!--- to the main router when the main router challenges the remote router. 

Enter Password: doc  

!--- Prompted to enter the password/secret. Enter "doc" as the PAP password.

ReEnter Password: doc  

!--- Prompted to re-enter password/secret.

remote>set encapsulation ppp  

!--- Sets the encapsulation for the user profile default template to PPP.
 
remote>set ppp authentication incoming PAP  

!--- Sets the PPP authentication for incoming calls to be forced to authenticate 
!--- using PAP. 

remote>set user HQ  

!--- Creates the user profile "HQ". Changes to the user profile "HQ". 
!--- This user profile name has to match the system name of the main site router. 
!--- The system name is received from the far end as the userid during 
!--- PPP authentication.

remote:HQ>set bridging on  

!--- Turns bridging on in the user profile "HQ".

remote:HQ>set timeout 120  

!--- Sets the idle timeout parameter to 120 seconds. 
!--- If there is no interesting traffic to be forwarded across the ISDN 
!--- connection for 120 seconds then the call is disconnected. 
!--- Because the IPX RIP updates are periodic by default on the user profile, 
!--- the call will never disconnect. 
!--- There are no IPX filters available at this time. 

remote:HQ>set 1 number 14085221234  

!--- Sets the phone numbers in the user profile "HQ" that are used to dial 
!--- out to the main router. In this case, the main router has the same phone 
!--- number for both b channels, so the same number is set in link 1 and link 2. 
!--- Link 2 is for bandwidth on demand. It will not automatically connect if 
!--- link 1 isn't already connected. 
!--- Link 2's number is NOT used for a secondary dial number, it is for 
!--- bandwidth on demand only.

remote:HQ>set 2 number 14085221234 

!--- Note: In this scenario, the main router is not dialing out to 
!--- the remote router. If it is necessary for the main router to call out 
!--- to the remote router, then add "set 1 number" and "set 2 number" to 
!--- the user profile "remote" with the phone numbers for the remote router.

remote:HQ>set ppp password host (promts for pap password) 

!--- Sets the pap password that will sent to the remote router when 
!--- the remote router challenges the main router. 

Enter Password: happy  

!--- Prompted to enter the password/secret. 
!--- Enter "happy" as the PAP password.

ReEnter Password: happy  

!--- Prompted to re-enter the password/secret to ensure consistency. 

remote:HQ>set ppp authentication outgoing PAP  

!--- Sets the PPP authentication on outbound calls to PAP. 
!--- This setting forces bi-directional authentication using PAP on the outgoing 
!--- call basis. When the remote router calls the main router, the remote router
!--- forces the main router to authenticate with it using PAP.