Cisco SOHO 70 Series Routers

Document ID: 12926

Contents

Introduction
Prerequisites
      Requirements
      Components Used
      Conventions
Configure
      Network Diagram
      Configurations
Verify
Troubleshoot
NetPro Discussion Forums - Featured Conversations
Related Information

Introduction

This document shows a Cisco SOHO77 Digital Subscriber Line (DSL) router that has been configured with AAL5MUX encapsulation and supports multiple Permanent Virtual Circuits (PVCs). The Cisco SOHO77 is connected to a Cisco 6130 Digital Subscriber Line Access Multiplexer (DSLAM) and terminates at a Cisco 6400 Universal Access Concentrator-Node Route Processor (UAC-NRP). This document also includes configurations for the Cisco 6130 and Cisco 6400.

In this example, IP is used for both PVCs to show how it maps to the Cisco 6400 UAC-NRP.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

The information in this document is based on these software and hardware versions:

• Cisco SOHO77 Customer Premises Equipment (CPE) Cisco IOS® Software Release 12.1(3)XP2

• Cisco 6400 UAC-NRP Cisco IOS Software Release 12.1(3)DC1

• Cisco 6400 UAC-NSP Cisco IOS Software Release 12.1(3)DB

• Cisco 6130 DSLAM-NI2 Cisco IOS Software Release 12.1(5)DA

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

Refer to the Cisco Technical Tips Conventions for more information on document conventions.

Configure

In this section, you are presented with the information to configure the features described in this document.

Note: Use the Command Lookup Tool ( registered customers only) to obtain more information on the commands used in this section.

Network Diagram

This document uses this network setup:

Configurations

This document uses these configurations:

• Cisco SOHO77

• Cisco 6130 DSLAM (NI2)

• Cisco 6400-NSP1

• Cisco 6400-NRP1

Current configuration:
!
version 12.1
service timestamps debug datetime msec
service timestamps log datetime msec
!
hostname R1
!
ip subnet-zero
!
interface Ethernet0
 no ip address
 no ip directed-broadcast
 shutdown
!
interface ATM0
 no ip address
 no ip directed-broadcast
 no atm ilmi-keepalive
 bundle-enable
 hold-queue 224 in
!
interface ATM0.3 point-to-point
 ip address 172.18.0.1 255.255.0.0
 no ip directed-broadcast
 pvc 3/100
  protocol ip 172.18.0.2
  encapsulation aal5mux ip
!
interface ATM0.4 point-to-point
 ip address 172.19.0.1 255.255.0.0
 no ip directed-broadcast
 PVC 4/100
  protocol ip 172.19.0.2
  encapsulation aal5mux ip
!
ip classless
ip route 172.18.0.2 255.255.255.255 ATM0.3
ip route 172.19.0.2 255.255.255.255 ATM0.4
!
end

Current configuration:
!
version 12.1
service timestamps debug datetime msec
service timestamps log datetime msec
!
hostname ni2
!
interface ATM0/0
 no ip address
 ATM cac service-category abr deny
 ATM maxvp-number 0
 ATM maxvc-number 4096
 ATM maxvci-bits 12
!
interface Ethernet0/0
 no ip route-cache
!
interface ATM0/1
 no ip address
 ATM ilmi-keepalive
 ATM cac service-category abr deny
!
interface ATM1/4
 no ip address
 no ATM ilmi-keepalive
 ATM PVC 3 100  interface  ATM0/1 3 100
 ATM PVC 4 100  interface  ATM0/1 4 100
ip classless
no ip http server
!
end

Current configuration:
version 12.0
service timestamps debug datetime msec
service timestamps log datetime msec
!
hostname NSP1
!
interface ATM0/0/0
 no ip address
 no ip directed-broadcast
!
interface Ethernet0/0/0
 no ip directed-broadcast
!
interface ATM1/0/0
 no ip address
 no ip directed-broadcast
 no ATM ilmi-keepalive
!
interface ATM8/0/1
 no ip address
 no ip directed-broadcast
 no ATM ilmi-keepalive
 ATM PVC 3 100  interface  ATM1/0/0 3 100
 ATM PVC 4 100  interface  ATM1/0/0 4 100
!
ip classless
end

Current configuration:
!
version 12.0
service timestamps debug datetime msec
service timestamps log datetime msec
!
hostname NRP
!
interface ATM0/0/0
 no ip address
 no ip directed-broadcast
 no ip route-cache
 no ip mroute-cache
 no ATM ilmi-keepalive
!
interface ATM0/0/0.3 point-to-point
 ip address 172.18.0.2 255.255.0.0
 no ip directed-broadcast
 no ip route-cache
 PVC 3/100
  encapsulation aal5mux ip
!
interface ATM0/0/0.4 point-to-point
 ip address 172.19.0.2 255.255.0.0
 no ip directed-broadcast
 no ip route-cache
 PVC 4/100
  encapsulation aal5mux ip
!
interface Ethernet0/0/1
 no ip address
 no ip directed-broadcast
!
interface Ethernet0/0/0
 no ip directed-broadcast
!
interface FastEthernet0/0/0
 no ip address
 no ip directed-broadcast
 full-duplex
!
ip classless
end

Verify

There is currently no verification procedure available for this configuration.

Troubleshoot

There is currently no specific troubleshooting information available for this configuration.

NetPro Discussion Forums - Featured Conversations

Related Information

• Multiple Routed Protocols Over ATM PVCs Using VC Multiplexing
• Configuring the Cisco 827 Router
• Cisco 6400 Software Setup Guide
• Long Reach Ethernet (LRE) and Digital Subscriber Line (xDSL) Technology Support
• LRE and xDSL Product Support
• Technical Support & Documentation - Cisco Systems