Cisco ONS 15454 and Cisco ONS 15327 Common TL1 Commands Release 3.4
This guide lists TL1 commands and autonomous messages by category. It includes basic descriptions and input and output formats supported by the Cisco ONS 15454 and the Cisco ONS 15327, Release 3.4. Refer to the Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, Release 3.4 for a complete description of TL1 commands.
TL1 commands conform to the following syntax: a:b:c:d:e: ...z; where: "a" is the Command Code "b" is the Target Identifier (TID) "c" is the Access Identifier (AID) or the User Identifier (UID) "d" is the Correlation Tag (CTAG) "e: ...z;" are other positions required for various commands The TID, AID, and CTAG route and control the TL1 command. Other parameters provide additional information required to complete the action requested by the command.
1 BLSR
Table 1 BLSR
DLT-BLSR:[<TID>]:<AID>:<CTAG>[:::]; Deletes the BLSR of the NE
ED-BLSR:[<TID>]:<AID>:<CTAG>:::[RINGID=<RINGID>,][NODEID=<NODEID>,] [RVRTV=<RVRTV>,][RVTM=<RVTM>,][SRVRTV=<SRVRTV>,][SRVTM=<SRVTM>][:] Edits the BLSR attributes
ENT-BLSR:[<TID>]:<AID>:<CTAG>:::[RINGID=<RINGID>,]NODEID=<NODEID>, MODE=<MODE>,[RVRTV=<RVRTV>,][RVTM=<RVTM>,][SRVRTV=<SRVRTV>,] [SRVTM=<SRVTM>,]EASTWORK=<EASTWORK>,WESTWORK=<WESTWORK>, [EASTPROT=<EASTPROT>,][WESTPROT=<WESTPROT>]; Creates either a two-fiber or four-fiber BLSR
REPT EVT RING Reports the occurrence of a non-alarmed event against a ring object for a BLSR
RTRV-BLSR:[<TID>]:[<AID>]:<CTAG>[::::]; Retrieves all of the BLSR information of the network element (NE) Output format:
SID DATE TIME M CTAG COMPLD "[<AID>]::[RINGID=<RINGID>,][NODEID=<NODEID>,][MODE=<MODE>,] [RVRTV=<RVRTV>,][RVTM=<RVTM>,][SRVRTV=<SRVRTV>,][SRVTM=<SRVTM>,] [EASTWORK=<EASTWORK>,][WESTWORK=<WESTWORK>,][EASTPROT=<EASTPROT>,] [WESTPROT=<WESTPROT>]" ;
RTRV-COND-RING:[<TID>]:[<AID>]:<CTAG>::[<TYPEREQ>][,,,]; Retrieves the current standing condition against a ring object for BLSR Output format:
SID DATE TIME M CTAG COMPLD "<AID>:[<NTFCNCDE>],<TYPEREP>,[<SRVEFF>],,,,,[<DESC>]" ;
2 Cross Connections
Table 2 Cross Connections
DLT-CRS-<STS_PATH>:[<TID>]:<FROM>,<TO>:<CTAG>[:::]; Deletes a cross-connection between STS paths
DLT-CRS-VT1:[<TID>]:<FROM>,<TO>:<CTAG>[:::]; Deletes the virtual tributary cross-connections
ED-CRS-<STS_PATH>:[<TID>]:<SRC>,<DST>:<CTAG>::::[<PST>],[<SST>]; Edits the state of an STS cross-connection
ENT-CRS-<STS_PATH>:[<TID>]:<FROM>,<TO>:<CTAG>::[<CCT>]::[<PST>],[<SST>]; Creates an STS cross-connection with cross-connection types (CCT)
ENT-CRS-VT1:[<TID>]:<FROM>,<TO>:<CTAG>::[<CCT>]::[<PST>],[<SST>]; Creates a VT1 cross-connection
RTRV-CRS:[<TID>]:<AID>:<CTAG>:::[CRSTYPE=<CRSTYPE>][:]; Retrieves all the cross-connections based on the required CRSTYPE (STS, VT, or both) Output format:
SID DATE TIME M CTAG COMPLD "<FROM>,<TO>:<CCT>,<MOD>::<PST>,[<SST>]" ;
RTRV-CRS-<STS_PATH>:[<TID>]:<AID>:<CTAG>[::::]; Retrieves any connections associated with the entered AID(s) or AID range Output format:
SID DATE TIME M CTAG COMPLD "<FROM>,<TO>:<CCT>,<MOD>::<PST>,[<SST>]" ;
RTRV-CRS-VT1:[<TID>]:<AID>:<CTAG>[::::]; Retrieves the VT cross-connection information Output format:
SID DATE TIME M CTAG COMPLD "<FROM>,<TO>:<CCT>::<PST>,[<SST>]" ;
3 Environment Alarms and Controls
Table 3 Environment Alarms and Controls
OPR-ACO-ALL:[<TID>]::<CTAG>; Instructs the NE to cut-off the office audible alarm indications without changing the local alarm indications
OPR-EXT-CONT:[<TID>]:<AID>:<CTAG>::[<CONTTYPE>],[<DURATION>]; Operates an external control and closes the external control contact
REPT ALM ENV Reports a user-defined condition on an environmental alarm input
REPT EVT ENV Reports a non-alarmed event against an environment alarm input
RLS-EXT-CONT:[<TID>]:<AID>:<CTAG>[::,]; Releases a forced contact state and returns the control of the contact to an automatic control state
RTRV-ALM-ENV:[<TID>]:<AID>:<CTAG>::[<NTFCNCDE>],[<ALMTYPE>]; Retrieves the environmental alarms Output format:
SID DATE TIME M CTAG COMPLD "<AID>:<NTFCNCDE>,<ALMTYPE>,,,[<DESC>]" ;
RTRV-ATTR-CONT:[<TID>]:<AID>:<CTAG>[::<CONTTYPE>]; Retrieves the attributes associated with an external control Output format:
SID DATE TIME M CTAG COMPLD "<AID>:[<CONTTYPE>]" ;
RTRV-ATTR-ENV:[<TID>]:<AID>:<CTAG>::[<NTFCNCDE>],[<ALMTYPE>]; Retrieves the attributes associated with an environmental alarm Output format:
SID DATE TIME M CTAG COMPLD "<AID>:[<NTFCNCDE>],[<ALMTYPE>],[<DESC>]" ;
RTRV-COND-ENV:[<TID>]:<AID>:<CTAG>::[<NTFCNCDE>],[<ALMTYPE>][,,,]; Retrieves the environmental conditions Output format:
SID DATE TIME M CTAG COMPLD "<AID>:<NTFCNCDE>,<ALMTYPE>,,,,,,[<DESC>]" ;
RTRV-EXT-CONT:[<TID>]:<AID>:<CTAG>[::<CONTTYPE>]; Retrieves the control state of an external control Output format:
SID DATE TIME M CTAG COMPLD "<AID>:[<CONTTYPE>],<DUR>,[<CONTSTATE>]" ;
SET-ATTR-CONT:[<TID>]:<AID>:<CTAG>[::<CONTTYPE>]; Sets the attributes associated with an external control
SET-ATTR-ENV:[<TID>]:<AID>:<CTAG>::[<NTFCNCDE>],[<ALMTYPE>],[<ALMMSG>]; Sets the attributes associated with an external alarm
4 Equipment
Table 4 Equipment
ALW-SWDX-EQPT:[<TID>]:<AID>:<CTAG>[::]; Allows automatic or manual switching on a duplex system containing duplexed or redundant equipment
ALW-SWTOPROTN-EQPT:[<TID>]:<AID>:<CTAG>[::<DIRN>]; Allows automatic or manual switching of an equipment unit back to protection
ALW-SWTOWKG-EQPT:[<TID>]:<AID>:<CTAG>[::<DIRN>]; Allows automatic or manual switching of an equipment unit back to a working status
DLT-EQPT:[<TID>]:<AID>:<CTAG>[:::]; Deletes a card from the NE
ED-EQPT:[<TID>]:<AID>:<CTAG>:::[PROTID=<PROTID>,][PRTYPE=<PRTYPE>,] [RVRTV=<RVRTV>,][RVTM=<RVTM>][:]; Edits the attributes for a given equipment slot in the NE
ENT-EQPT:[<TID>]:<AID>:<CTAG>::<AIDTYPE>:[PROTID=<PROTID>,] [PRTYPE=<PRTYPE>,][RVRTV=<RVRTV>,][RVTM=<RVTM>][:]; Enters the card type and attributes for a given equipment slot in the NE
INH-SWDX-EQPT:[<TID>]:<AID>:<CTAG>[::]; Inhibits the automatic or manual switching on an NE containing duplex equipment
INH-SWTOPROTN-EQPT:[<TID>]:<AID>:<CTAG>[::<DIRN>]; Inhibits automatic or manual switching of an equipment unit to protection
INH-SWTOWKG-EQPT:[<TID>]:<AID>:<CTAG>[::<DIRN>]; Inhibits automatic or manual switching of an equipment unit back to the working unit
REPT ALM EQPT Reports an alarm condition against an equipment unit or slot
REPT EVT EQPT Reports the occurrence of a non-alarmed event against an equipment unit or slot
RTRV-ALM-EQPT:[<TID>]:<AID>:<CTAG>::[<NTFCNCDE>],[<CONDTYPE>],[<SRVEFF>][,,,]; Retrieves and sends the current status of alarm conditions associated with the equipment units Output format:
SID DATE TIME M CTAG COMPLD "[<AID>],[<AIDTYPE>]:<NTFCNCDE>,<CONDTYPE>,<SRVEFF>,,,,:[<DESC>]" ;
RTRV-COND-EQPT:[<TID>]:<AID>:<CTAG>::[<TYPEREQ>][,,,]; Retrieves the condition equipment Output format:
SID DATE TIME M CTAG COMPLD "<AID>,[<AIDTYPE>]:[<NTFCNCDE>],<TYPEREP>,[<SRVEFF>],,,,,[<DESC>]" ;
RTRV-EQPT:[<TID>]:<AID>:<CTAG>[::::]; Retrieves protection group information and status information for all cards Output format:
SID DATE TIME M CTAG COMPLD "<AID>:<AIDTYPE>,<EQUIP>,[<ROLE>],[<STATUS>]:[PROTID=<PROTID>,] [PRTYPE=<PRTYPE>,][RVRTV=<RVRTV>,][RVTM=<RVTM>,] [CARDNAME=<CARDNAME>]:[<PST>],[<SST>]" ;
SW-DX-EQPT:[<TID>]:<AID>:<CTAG>::[<MODE>][,]; Switches an XC/XCVT card with the mate card within the NE
SW-TOPROTN-EQPT:[<TID>]:<AID>:<CTAG>::[<MODE>],[<PROTID>],[<DIRN>]; Performs an equipment unit protection switch
SW-TOWKG-EQPT:[<TID>]:<AID>:<CTAG>::[<MODE>],[<DIRN>]; Switches the protected working unit back to the working unit
5 Fault
Table 5 Fault
REPT ALM <MOD2ALM> Reports an alarm condition against a facility or a path
REPT ALM COM Reports an alarm condition when an AID cannot be given
REPT ALM RING Reports an alarm condition against a ring object for BLSR
REPT EVT <MOD2ALM> Reports the occurrence of a non-alarmed event
REPT EVT COM Reports a non-alarmed event against an NE when there is no AID associated with it
RTRV-ALM-<MOD2ALM>:[<TID>]:<AID>:<CTAG>::[<NTFCNCDE>], [<CONDTYPE>],[<SRVEFF>][,,,] Retrieves and sends the current status of the alarm conditions Output format:
SID DATE TIME M CTAG COMPLD "<AID>,[<AIDTYPE>]:<NTFCNCDE>,<CONDTYPE>,<SRVEFF>,,,,:[<DESC>]" ;
RTRV-ALM-ALL:[<TID>]::<CTAG>::[<NTFCNCDE>],[<CONDITION>],[<SRVEFF>][,,,]; Retrieves and sends the current status of all active alarm conditions Output format:
SID DATE TIME M CTAG COMPLD "[<AID>],[<AIDTYPE>]:<NTFCNCDE>,<CONDTYPE>,<SRVEFF>,,,,:[<DESC>],[<AIDDET>]" ;
RTRV-ALM-RING:[<TID>]:[<AID>]:<CTAG>::[<NTFCNCDE>],[<CONDITION>], [<SRVEFF>][,,,]; Retrieves and sends the current status of all active alarm conditions against a ring object for BLSR Output format:
SID DATE TIME M CTAG COMPLD "<AID>:<NTFCNCDE>,<CONDTYPE>,<SRVEFF>,,,,:[<DESC>]" ;
RTRV-COND-<MOD2ALM>:[<TID>]:<AID>:<CTAG>::[<TYPEREQ>][,,,]; Retrieves the current standing condition and/or state associated with an entity Output format: SID DATE TIME M CTAG COMPLD "<AID>,[<AIDTYPE>]:[<NTFCNCDE>],<TYPEREP>,[<SRVEFF>],,,,,[<DESC>]" ;
RTRV-COND-ALL:[<TID>]::<CTAG>::[<TYPEREQ>][,,,]; Retrieves the current standing condition for all entities Output format:
SID DATE TIME M CTAG COMPLD "<AID>,[<AIDTYPE>]:[<NTFCNCDE>],<TYPEREP>,[<SRVEFF>],,,,,[<DESC>]" ;
REPT DBCHG Reports any changes on the NE that result from certain TL1 commands or an external event
RTRV-LOG:[<TID>]::<CTAG>::<LOGNM>; Retrieves the alarm log of the NE Output format:
SID DATE TIME M CTAG COMPLD "<AID>,<ALMNUMBER>:CURRENT=<CURRENT>,[PREVIOUS=<PREVIOUS>,] <CONDITION>,<SRVEFF>,[TIME=<OCRTIME>,][DATE=<OCRDAT>]:<ALMDESCR>" ;
7 Performance
Table 7 Performance
ALW-PMREPT-ALL:[<TID>]::<CTAG>; Resumes processing all the PM reports that are inhibited
INH-PMREPT-ALL:[<TID>]::<CTAG>; Inhibits all scheduled PM reporting
INIT-REG-<MOD2>:[<TID>]:<AID>:<CTAG>::,,[<LOCN>],[<DIRN>],[<TMPER>][,,]; Initializes the performance monitoring (PM) registers
REPT PM <MOD2> Reports of Performance Monitoring statistics as a result of schedule created by SCHED-PMREPT
RTRV-PM-<MOD2>:[<TID>]:<AID>:<CTAG>::[<MONTYPE>],[<MONLEV>], [<LOCN>],[<DIRN>],[<TMPER>],[<DATE>],[<TIME>]; Retrieves the values of PM parameters for a specified card type Output format:
SID DATE TIME M CTAG COMPLD "<AID>,[<AIDTYPE>]:<MONTYPE>,<MONVAL>,[<VLDTY>],[<LOCN>], [<DIRN>],[<TMPER>],[<MONDAT>],[<MONTM>]" ;
RTRV-PMMODE-<STS_PATH>:[<TID>]:AID>:<CTAG>::<LOCN>; Retrieves the PM mode that has been previously set in the NE data collection Output format:
SID DATE TIME M CTAG COMPLD "<AID>:[<LOCN>],<MODETYPE>" ;
RTRV-PMSCHED-<MOD2>:[<TID>]:<AID>:<CTAG>; Retrieves the PM reporting schedule that was set for the NE by SCHED-PMREPT Output format:
SID DATE TIME M CTAG COMPLD "<AID>,[<AIDTYPE>]:<REPTINVL>,<REPTDAT>,<REPTTM>,[<NUMINVL>],, [<MONLEV>],<LOCN>,,[<TMPER>],,[<INHMODE>]" ;
RTRV-PMSCHED-ALL:[<TID>]::<CTAG>; Retrieves all the PM reporting schedules that were set for the NE by SCHED-PMREPT Output format:
M CTAG COMPLD "<AID>,[<AIDTYPE>]:<REPTINVL>,<REPTDAT>,<REPTTM>,[<NUMINVL>],, [<MONLEV>],<LOCN>,,[<TMPER>],,[<INHMODE>]" ;
RTRV-TH-<MOD2>:[<TID>]:<AID>:<CTAG>::[<MONTYPE>],[<LOCN>],[<TMPER>]; Retrieves the current threshold level of one or more monitored parameters Output format:
SID DATE TIME M CTAG COMPLD "<AID>,[<AIDTYPE>]:<MONTYPE>,[<LOCN>],,<THLEV>,[<TMPER>]" ;
SCHED-PMREPT-<MOD2>:[<TID>]:<SRC>:<CTAG>::[<REPTINVL>],[<REPTSTATM>], [<NUMREPT>],,[<MONLEV>],[<LOCN>],,[<TMPER>][,]; Schedules/reschedules the NE to report the performance monitoring data for a line facility or for an STS/VT path periodically, using an automatic REPT PM message
SET-PMMODE-<STS_PATH>:[<TID>]:<AID>:<CTAG>::<LOCN>,<MODETYPE>,[<PMSTATE>]; Sets the mode and turns on or off the mode of the PM data collection
SET-TH-<MOD2>:[<TID>]:<AID>:<CTAG>::<MONTYPE>,<THLEV>,[<LOCN>],,[<TMPER>]; Sets the threshold of PM parameters
8 Ports
Table 8 Ports
ED-<OCN_TYPE>:[<TID>]:<AID>:<CTAG>:::[DCC=<DCC>,][SYNCMSG=<SYNCMSG>,] [SENDDUS=<SENDDUS>,][PJMON=<PJMON>,][SFBER=<SFBER>,][SDBER=<SDBER>,] [MODE=<MODE>,][MUX=<MUX>,][SOAK=<SOAK>]:[<PST>],[<SST>]; Edits the attributes and state of an OC-N facility
ED-DS1:[<TID>]:<AID>:<CTAG>[:::TACC=<TACC>]; Edits the test access attributes for DS1 access on a DS3XM
ED-EC1:[<TID>]:<AID>:<CTAG>:::[PJMON=<PJMON>,][LBO=<LBO>,] [SOAK=<SOAK>]:[<PST>],[<SST>]; Edits the attributes of an EC1
ED-G1000:[<TID>]:<AID>:<CTAG>:::[MFS=<MFS>,][FLOW=<FLOW>]:[<PST>],[<SST>]; Edits the attributes related to a G1000 port
ED-T1:[<TID>]:<AID>:<CTAG>:::[LINECDE=<LINECDE>,][FMT=<FMT>,][LBO=<LBO>,] [TACC=<TACC>,][SOAK=<SOAK>]:[<PST>],[<SST>]; Edits the attributes related a DS1/T1 port
ED-T3:[<TID>]:<AID>:<CTAG>:::[FMT=<FMT>,][LINECDE=<LINECDE>,][LBO=<LBO>,] [TACC=<TACC>,][SOAK=<SOAK>]:[<PST>],[<SST>]; Edits the attributes related to a DS3/T3 port
REPT RMV <MOD2_IO> Reports the occurrence of a non-alarm or event that is triggered by removing a facility
REPT RST <MOD2_IO> Reports the occurrence of a non-alarm or event that is triggered by restoring a facility
RMV-<MOD2_IO>:[<TID>]:<AID>:<CTAG>::[<CMDMODE>],[<PST>],[<SST>]; Removes a facility from service
RST-<MOD2_IO>:[<TID>]:<AID>:<CTAG>:[:]; Provisions a facility in service
RTRV-<OCN_TYPE>:[<TID>]:<AID>:<CTAG>[::::]; Retrieves the attributes and state of an OC-N facility Output format:
SID DATE TIME M CTAG COMPLD "<AID>:,,[<ROLE>],[<STATUS>]:[DCC=<DCC>,][TMGREF=<TMGREF>,] [SYNCMSG=<SYNCMSG>,][SENDDUS=<SENDDUS>,][PJMON=<PJMON>,] [SFBER=<SFBER>,][SDBER=<SDBER>,][MODE=<MODE>,][WVLEN=<WVLEN>,] [RINGID=<RINGID>,][BLSRTYPE=<BLSRTYPE>,][MUX=<MUX>,][UNIC=<UNIC>,] [CCID=<CCID>,][NBRIX=<NBRIX>,][SOAK=<SOAK>]:<PST>,[<SST>]" ;
RTRV-DS1:[<TID>]:<AID>:<CTAG>[::::]; Retrieves the test access attributes on a DS1 layer of DS3XM Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[TACC=<TACC>]" ;
RTRV-EC1:[<TID>]:<AID>:<CTAG>[::::]; Retrieves the facility status of an EC1 card Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[PJMON=<PJMON>,][LBO=<LBO>,][RXEQUAL=<RXEQUAL>,] [SOAK=<SOAK>]:<PST>,[<SST>]" ;
RTRV-G1000:[<TID>]:<AID>:<CTAG>; Retrieves the G1000 facilities configuration Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[MFS=<MFS>,][FLOW=<FLOW>,][LAN=<LAN>,] [OPTICS=<OPTICS>]:<PST>,[<SST>]" ;
RTRV-T1:[<TID>]:<AID>:<CTAG>[::::]; Retrieves the DS1 facilities configuration Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[LINECDE=<LINECDE>,][FMT=<FMT>,][LBO=<LBO>,][TACC=<TAP>,] [SOAK=<SOAK>]:<PST>,[<SST>]" ;
RTRV-T3:[<TID>]:<AID>:<CTAG>[::::]; Retrieves the facilities properties of a DS3 and DS3XM card Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[FMT=<FMT>,][LINECDE=<LINECDE>,][LBO=<LBO>,][TACC=<TAP>,] [SOAK=<SOAK>]:<PST>,[<SST>]" ;
9 Security
Table 9 Security
ACT-USER:[<TID>]:<UID>:<CTAG>::<PID>; Sets up a session with the NE
CANC Reports the occurrence of a session timeout event Output format:
SID DATE TIME A ATAG CANC "<UID>" ;
CANC-USER:[<TID>]:<USERID>:<CTAG>; Logs a user out of an active session with the NE
DLT-USER-SECU:[<TID>]:<UID>:<CTAG>; Removes a user; can only be performed by a Superuser
ED-PID:[<TID>]:<UID>:<CTAG>::<OLDPID>,<NEWPID>; Allows a user to change his or her own password
ED-USER-SECU:[<TID>]:<UID>:<CTAG>::[<NEWUID>],[<NEWPID>],,[<UAP>][:]; Edits a user's privileges, password, or ID and can only be performed by a Superuser
ENT-USER-SECU:[<TID>]:<UID>:<CTAG>::<PID>,,<UAP>[:]; Adds a user account; can only be performed by a Superuser
REPT EVT SECU Reports the occurrence of a non-alarmed security event against the NE
RTRV-USER-SECU:[<TID>]:<UID>:<CTAG>; Retrieves the security information of a specified user or list of users Output format:
SID DATE TIME M CTAG COMPLD "<UID>:,<UAP>" ;
10 SONET Line Protection
Table 10 SONET Line Protection
DLT-FFP-<OCN_TYPE>:[<TID>]:<WORK>,<PROTECT>:<CTAG>[:::]; Deletes an OC-N facility protection group in a 1+1 architecture
ED-FFP-<OCN_TYPE>:[<TID>]:<AID>:<CTAG>:::[PROTID=<PROTID>,][RVRTV=<RVRTV>,] [RVTM=<RVTM>,][PSDIRN=<PSDIRN>][:]; Edits the optical facility protection
ENT-FFP-<OCN_TYPE>:[<TID>]:<WORK>,<PROTECT>:<CTAG>:::[PROTID=<PROTID>,] [RVRTV=<RVRTV>,][RVTM=<RVTM>,][PSDIRN=<PSDIRN>][:]; Creates an optical 1+1 protection
EX-SW-<OCN_BLSR>:[TID]:<AID>:<CTAG>::[<ST>]; Exercises the algorithm for switching from a working facility to a protection facility without actually performing a switch
OPR-PROTNSW-<OCN_TYPE>:[<TID>]:<AID>:<CTAG>::<SC>,[<SWITCHTYPE>]; Initiates a SONET line protection switch request
RLS-PROTNSW-<OCN_TYPE>:[<TID>]:<AID>:<CTAG>[::]; Releases a SONET line protection switch request
RTRV-FFP-<OCN_TYPE>:[<TID>]:<AID>:<CTAG>[::::]; Retrieves the optical facility protection information Output format:
SID DATE TIME M CTAG COMPLD "<WORK>,<PROTECT>::[PROTID=<PROTID>,][RVRTV=<RVRTV>,][RVTM=<RVTM>,] [PSDIRN=<PSDIRN>]" ;
11 STS Paths
Table 11 STS Paths
ED-<STS_PATH>:[<TID>]:<AID>:<CTAG>:::[SFBER=<SFBER>,][SDBER=<SDBER>,] [RVRTV=<RVRTV>,][RVTM=<RVTM>,][SWPDIP=<SWPDIP>,][EXPTRC=<EXPTRC>,] [TRC=<TRC>,][TRCMODE=<TRCMODE>,][TACC=<TACC>]:[<PST>],[<SST>]; Edits the attributes associated with an STS path
RTRV-<STS_PATH>:[<TID>]:<AID>:<CTAG>[::::]; Retrieves the attributes associated with an STS path Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[LEVEL=<LEVEL>,][SFBER=<SFBER>,][SDBER=<SDBER>,][RVRTV=<RVRTV>,] [RVTM=<RVTM>,][SWPDIP=<SWPDIP>,][EXPTRC=<EXPTRC>,][TRC=<TRC>,] [INCTRC=<INCTRC>,][TRCMODE=<TRCMODE>,][TACC=<TACC>]:<PST>,[<SST>]" ;
RTRV-PTHTRC-<STS_PATH>:[<TID>]:<AID>:<CTAG>::[<MSGTYPE>][:<LOCN>]; Retrieves the contents of the SONET path trace message that is transported in the J1 byte of the SONET STS path Output format:
SID DATE TIME M CTAG COMPLD "<TRACMSG>" ;
12 STS and VT Paths
Table 12 STS and VT Paths
ED-VT1:[<TID>]:<AID>:<CTAG>:::[RVRTV=<RVRTV>,][RVTM=<RVTM>,][TACC=<TACC>]: [<PST>],[<SST>]; Edits the attributes associated with a VT1 path
RTRV-VT1:[<TID>]:<AID>:<CTAG>[::::]; Retrieves the attributes associated with a VT1 path Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[RVRTV=<RVRTV>,][RVTM=<RVTM>,][TACC=<TACC>]:[<PST>],[<SST>]" ;
13 Synchronization
Table 13 Synchronization
ED-BITS:[<TID>]:<AID>:<CTAG>:::[LINECDE=<LINECDE>,][FMT=<FMT>,][LBO=<LBO>,] [SYNCMSG=<SYNCMSG>,][AISTHRSHLD=<AISTHRSHLD>][:<PST>]; Edits the BITS reference attributes
ED-NE-SYNCN:[<TID>]::<CTAG>:::[TMMD=<TMMD>,][SSMGEN=<SSMGEN>,] [QRES=<QRES>,][RVRTV=<RVRTV>,][RVTM=<RVTM>]; Edits the synchronization attributes of the NE
ED-SYNCN:[<TID>]:<AID>:<CTAG>:::[PRI=<PRI>,][SEC=<SEC>,][THIRD=<THIRD>][:]; Edits the synchronization reference list used to determine the sources for the NE's reference clock and the BITS output clock
OPR-SYNCNSW:[<TID>]:[<AID>]:<CTAG>::<SWITCHTO>,[<SC>]; Initiates a switch to the reference specified by the synchronization reference number if the reference supplied is valid
REPT ALM BITS Reports an alarm condition on a BITS facility
REPT ALM SYNCN Reports an alarm condition against a synchronization reference
REPT EVT BITS Reports the occurrence of a non-alarmed event against a BITS facility
REPT EVT SYNCN Reports the occurrence of a non-alarmed event against a synchronization entity
RLS-SYNCNSW:[<TID>]:[<AID>]:<CTAG>; Releases the previous synchronization reference provided by the OPR-SYNCNSW command
RTRV-ALM-BITS:[<TID>]:<AID>:<CTAG>::[<NTFCNCDE>],[<CONDTYPE>],[<SRVEFF>][,,,]; Retrieves and sends the current status of alarm conditions associated with the BITS facility Output format:
SID DATE TIME M CTAG COMPLD "<AID>,[<AIDTYPE>]:<NTFCNCDE>,<CONDTYPE>,<SRVEFF>,,,,:[<DESC>]" ;
RTRV-ALM-SYNCN:[<TID>]:<AID>:<CTAG>::[<NTFCNCDE>],[<CONDTYPE>], [<SRVEFF>][,,,]; Retrieves and sends the current status of alarm conditions associated with a synchronization facility Output format:
SID DATE TIME M CTAG COMPLD "<AID>,[<AIDTYPE>]:<NTFCNCDE>,<CONDTYPE>,<SRVEFF>,,,,:[<DESC>]" ;
RTRV-BITS:[<TID>]:<AID>:<CTAG>[::::]; Retrieves the BITS configuration command Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[LINECDE=<LINECDE>,][FMT=<FMT>,][LBO=<LBO>,][SYNCMSG=<SYNCMSG>,] [AISTHRSHLD=<AISTHRSHLD>]:[<PST>]" ;
RTRV-COND-BITS:[<TID>]:<AID>:<CTAG>::[<TYPEREQ>][,,,]; Retrieves the standing condition on BITS Output format:
SID DATE TIME M CTAG COMPLD "<AID>,[<AIDTYPE>]:[<NTFCNCDE>],<TYPEREP>,[<SRVEFF>],,,,,[<DESC>]" ;
RTRV-COND-SYNCN:[<TID>]:<AID>:<CTAG>::[<TYPEREQ>][,,,]; Retrieves the synchronization condition Output format:
SID DATE TIME M CTAG COMPLD "<AID>,[<AIDTYPE>]:[<NTFCNCDE>],<TYPEREP>,[<SRVEFF>],,,,,[<DESC>]" ;
RTRV-NE-SYNCN:[<TID>]::<CTAG>[::::]; Retrieves the synchronization attributes of the NE Output format:
SID DATE TIME M CTAG COMPLD "::[TMMD=<TMMD>,][SSMGEN=<SSMGEN>,][QRES=<QRES>,][RVRTV=<RVRTV>,] [RVTM=<RVTM>]" ;
RTRV-SYNCN:[<TID>]:<AID>:<CTAG>[::::]; Retrieves the synchronization reference list used to determine the sources for the NE's reference clock and the BITS output clock Output format:
SID DATE TIME M CTAG COMPLD "<AID>:<REF>,<REFVAL>,[<QREF>],[<STATUS>],[<PROTECTSTATUS>]" ;
14 System
Table 14 System
ALW-MSG-ALL:[<TID>]::<CTAG>[::,,]; Allows REPT ALM and REPT EVT autonomous messages to be transmitted
APPLY:[<TID>]::<CTAG>[::<MEM_SW_TYPE>]; Activates or reverts a software load during a software upgrade or downgrade process
COPY-RFILE:[<TID>]:<SRC>:<CTAG>::TYPE=<XFERTYPE>,[SRC=http://www.cisco.com/univercd/cc/td/doc/product/ong/15400/r34docs/<SRC1>]; Downloads a new software package from the location specified by the FTP URL
ED-DAT:[<TID>]::<CTAG>::[<DATE>],[<TIME>]; Edits the date and the time
ED-NE-GEN:[<TID>]::<CTAG>:::[NAME=<NAME>,][IPADDR=<IPADDR>,] [IPMASK=<IPMASK>,][DEFRTR=<DEFRTR>,][IIOPPORT=<IIOPPORT>,][NTP=<NTP>]; Edits the general node attributes of an NE
INH-MSG-ALL:[<TID>]::<CTAG>[::,,]; Inhibits REPT ALM and REPT EVT autonomous messages from being transmitted
INIT-SYS:[<TID>]:<AID>:<CTAG>[::]; Initializes the specified card and its associated subsystem(s)
REPT EVT FXFR Reports the FTP software download status of the start, completion, and completed percentage
RTRV-HDR:[<TID>]::<CTAG>; Retrieves the header of a TL1 response message
RTRV-INV:[<TID>]:<AID>:<CTAG>[::::]; Retrieves a listing of the equipment inventory Output format:
SID DATE TIME M CTAG COMPLD "<AID>,<AIDTYPE>::[PN=<PN>,][HWREV=<HWREV>,][FWREV=<FWREV>,] [SN=<SN>,][CLEI=<CLEI>]" ;
RTRV-MAP-NETWORK:[<TID>]::<CTAG>; Retrieves all the NE attributes which can be reached from the GNE Output format:
SID DATE TIME M CTAG COMPLD "<IPADDR>,<NODENAME>,<PRODUCT>" ;
RTRV-NE-GEN:[<TID>]::<CTAG>; Retrieves the general NE attributes Output format:
SID DATE TIME M CTAG COMPLD "[IPADDR=<IPADDR>,][IPMASK=<IPMASK>,][DEFRTR=<DEFRTR>,] [IIOPPORT=<IIOPPORT>,][NTP=<NTP>,][NAME=<NAME>,][SWVER=<SWVER>,] [LOAD=<LOAD>,][PROTSWVER=<PROTSWVER>,][PROTLOAD=<PROTLOAD>,] [DEFDESC=<DEFDESC>]" ;
RTRV-NE-IPMAP:[<TID>]:[<AID>]:<CTAG>; Retrieves the IP addresses and the node names of the NEs which are DCC-connected to this NE Output format:
SID DATE TIME M CTAG COMPLD "<AID>:<IPADDR>,<NODENAME>" ;
RTRV-TOD:[<TID>]::<CTAG>; Retrieves the system date and time at the instant the command is executed Output format:
SID DATE TIME M CTAG COMPLD "<YEAR>,<MONTH>,<DAY>,<HOUR>,<MINUTE>,<SECOND>,<TMTYPE>" ;
SET-TOD:[<TID>]::<CTAG>::<YEAR>,<MONTH>,<DAY>,<HOUR>,<MINUTE>, <SECOND>,[<DIFFERENCE>][:DST=<DST>]; Sets the system date and time for the NE
15 Test Access
Table 15 Test Access
CHG-ACCMD-<MOD_TACC>:[<TID>]:<TAP>:<CTAG>::<MD>; Changes the test access mode for the circuit being tested
CONN-TACC-<MOD_TACC>:[<TID>]:<AID>:<CTAG>::<TAP>:MD=<MD>; Connects the STS or VT defined by AID to the STS specified by the TAP number Output format:
SID DATE TIME M CTAG COMPLD "<TAP>" ;
DISC-TACC:[<TID>]:<TAP>:<CTAG>; Disconnects the TAP and puts the connection back to its original state
RTRV-TACC:[<TID>]:<TAP>:<CTAG>; Retrieves details associated with a TAP Output format:
SID DATE TIME M CTAG COMPLD "<TAP>:<TACC_AID1>,<TACC_AID2>,[<MD>],[<E_CONN>],[<F_CONN>]" ;
16 Testing
Table 16 Testing
OPR-LPBK-<MOD2_IO>:[<TID>]:<AID>:<CTAG>::,,,[<LPBKTYPE>]; Operates a signal loopback on an I/O card
RLS-LPBK-<MOD2_IO>:[<TID>]:<AID>:<CTAG>::,,,[<LPBKTYPE>]; Releases a signal loopback on an I/O card
17 UCP
Table 17 UCP
DLT-UCP-CC:[<TID>]:<AID>:<CTAG>[::::]; Deletes an UCP IP control channel
DLT-UCP-IF:[<TID>]:<AID>:<CTAG>[::::]; Deletes an UCP interface
DLT-UCP-NBR:[<TID>]:<AID>:<CTAG>[::::]; Deletes an UCP neighbor
ED-UCP-CC:[<TID>]:<AID>:<CTAG>:::[LOCALIPCC=<LOCALIPCC>,] [REMOTEIPCC=<REMOTEIPCC>,][LMPHELLOINT=<LMPHELLOINT>,] [LMPHELLODEADINT=<LMPHELLODEADINT>,][MTU=<MTU>,][CRCMD=<CRCMD>][:]; Edits UCP IP control channel attributes
ENT-UCP-CC:[<TID>]:[<AID>]:<CTAG>:::[NBRIX=<NBRIX>,][CCTYPE=<CCTYPE>,] [PORT=<PORT>,][LOCALCCID=<LOCALCCID>,][LOCALIPCC=<LOCALIPCC>,] [REMOTCCID=<REMOTECCID>,][REMOTEIPCC=<REMOTEIPCC>,] [LMPHELLOINT=<LMPHELLOINT>,][LMPHELLODEADINT=<LMPHELLODEADINT>,] [MTU=<MTU>,][CRCMD=<CRCMD>,][TUNMD=<TUNMD>][:]; Creates an UCP IP control channel
ENT-UCP-IF:[<TID>]:<AID>:<CTAG>:::[NBRIX=<NBRIX>,][CCID=<CCID>,] [LOCALIFID=<LOCALIFID>,][REMOTEIFID=<REMOTEIFID>,][TNATYPE=<TNATYPE>,] [TNAADDR=<TNAADDR>,][CORENETWORKID=<CORENETWORKID>][:]; Creates an UCP interface
ENT-UCP-NBR:[<TID>]:<AID>:<CTAG>:::[NBRIX=<NBRIX>,][NODEID=<NODEID>,] NAME=<NAME>,[NDEN=<NDEN>,][HELLOEN=<HELLOEN>,][HELLOINT=<HELLOINT>,] [REFREDEN=<REFREDEN>,][NUMRXMTS=<NUMRXMTS>][:]; Creates an UCP neighbor
REPT ALM UCP Reports an alarm condition against an UCP object
REPT EVT UCP Reports the occurrence of a non-alarmed event against an UCP object
RTRV-ALM-UCP:[<TID>]:<AID >:<CTAG>::[<NTFCNCDE>],[<CONDTYPE>],[<SRVEFF>][,,,]; Retrieves and sends the current status of all active alarm conditions against an UCP object Output format:
SID DATE TIME M CTAG COMPLD "<AID>:<NTFCNCDE>,<CONDTYPE>,<SRVEFF>,,,,:[<DESC>]" ;
RTRV-COND-UCP:[<TID>]:<AID>:<CTAG>::[<TYPEREQ>][,,,]; Retrieves the current standing condition against an UCP object Output format:
SID DATE TIME M CTAG COMPLD "<AID>:[<NTFCNCDE>],<TYPEREP>,[<SRVEFF>],,,,,[<DESC>]" ;
RTRV-UCP-CC:[<TID>]:[<AID >]:<CTAG>[::::]; Retrieves UCP IP control channel attributes Output format:
SID DATE TIME M CTAG COMPLD "[<AID>]::NBRIX=<NBRIX>,CCTYPE=<CCTYPE>,[PORT=<PORT>,] LOCALCCID=<LOCALCCID>,LOCALIPCC=<LOCALIPCC>, REMOTECCID=<REMOTECCID>,[REMOTEIPCC=<REMOTEIPCC>,] LMPHELLOINT=<LMPHELLOINT>,OPERLMPHELLOINT=<OPERLMPHELLOINT>, LMPHELLODEADINT=<LMPHELLODEADINT>, OPERLMPHELLODEADINT=<OPERLMPHELLODEADINT>,[TUNMD=<TUNMD>,] [MTU=<MTU>,][CRCMD=<CRCMD>]" ;
SID DATE TIME M CTAG COMPLD "[<AID>]::NBRIX=<NBRIX>,CCID=<CCID>,LOCALIFID=<LOCALIFID>, REMOTEIFID=<REMOTEIFID>,TNATYPE=<TNATYPE>,TNAADDR=<TNAADDR>, CORENETWORKID=<CORENETWORKID>" ;
RTRV-UCP-NBR:[<TID>]:[<AID>]:<CTAG>[::::]; Retrieves an UCP neighbor Output format:
SID DATE TIME M CTAG COMPLD "<AID>::[NBRIX=<NBRIX>,][NODEID=<NODEID>,][NAME=<NAME>,] [NDEN=<NDEN>,][HELLOEN=<HELLOEN>,][HELLOINT=<HELLOINT>,] [REFREDEN=<REFREDEN>,][NUMRXMTS=<NUMRXMTS>]" ;
SID DATE TIME M CTAG COMPLD "<::[NODEID=<NODEID>,][INITRETRY=<INITRETRY>,][MAXRETRY=<MAXRETRY>,] [RESTARTTM=<RESTARTTM>,][RECOVTM=<RECOVTM>,][RXMTINT=<RXMTINT>,] [RFRSHINT=<RFRSHINT>,][RESVTIMEOUT=<RESVTIMEOUT>,] [RESVCONFTIMEOUT=<RESVCONFTIMEOUT>,][SOURCEDIP=<SOURCEDIP>,] [DESTINATIONDIP=<DESTINATIONDIP>]" ;
18 UPSR Switching
Table 18 UPSR Switching
OPR-PROTNSW-<STS_PATH>:[<TID>]:<AID>:<CTAG>::<SC>[:]; Initiates a SONET path protection (UPSR) switch request
OPR-PROTNSW-VT1:[<TID>]:<AID>:<CTAG>::<SC>[:]; Initiates a SONET path protection (UPSR) switch request
REPT SW Reports the autonomous switching of a unit in a duplex equipment pair to standby and its mate to the active state
RLS-PROTNSW-<STS_PATH>:[<TID>]:<AID>:<CTAG>[::]; Releases a SONET path protection switch request that was established with the OPR-PROTNSW-<STS_PATH> command
RLS-PROTNSW-VT1:[<TID>]:<AID>:<CTAG>[::]; Releases a SONET path protection switch request that was established with the OPR-PROTNSW-VT1 command
RTRV-PROTNSW-<STS_PATH>:[<TID>]:<AID>:<CTAG>[::::]; Retrieves the switching state of a SONET UPSR STS path specified in the AID Output format:
SID DATE TIME M CTAG COMPLD "<AID>:<SC>,[<SWITCHTYPE>]" ;
RTRV-PROTNSW-VT1:[<TID>]:<AID>:<CTAG>[::::]; Retrieves the switching state of a SONET UPSR VT path specified in the AID Output format:
SID DATE TIME M CTAG COMPLD "<AID>:<SC>,[<SWITCHTYPE>]" ;
