Table Of Contents
Release Notes for Cisco EdgeCraft Release 2.0.1
Release notes address closed (maintenance) issues, caveats, and new features for the Cisco EdgeCraft. For detailed information regarding features, capabilities, hardware, and software introduced with this release, refer to Release 2.0 of the Cisco EdgeCraft Installation and Operations Guide. For the most current version of the Release Notes for Cisco EdgeCraft Release 2.0.1, visit the following URL:
Cisco also provides Bug Toolkit, a web resource for tracking defects. To access Bug Toolkit, visit the following URL:
Changes to the Release Notes
This section documents supplemental changes that have been added to the Release Notes for Cisco EdgeCraft Release 2.0.1 since the production of the Cisco ONS 15305 System Software CD for Release 2.0.1.
No changes have been added to the release notes for Release 2.0.1.
Review the notes listed below before deploying the EdgeCraft. Caveats with DDTS tracking numbers are known system limitations that are scheduled to be addressed in a subsequent release. Caveats without DDTS tracking numbers are provided to point out procedural or situational considerations when deploying the product.
DDTS # CSCeg61416
VT100 Terminal Blocks TFTP Server Port and SNMP Traps.
If CiscoEdgeCraft is started and the VT100 terminal is started from the login window an exit from CiscoEdgeCraft (directly from login or after connect to element with the VT100 terminal running) will cause an occupied TFTP-port. When CiscoEdgeCraft is started again, the TFTP server does not function.
Shut down the VT100 terminal before starting CiscoEdgeCraft again.
DDTS # CSCeg61421
Adding Route on Interface with Down Status.
Adding default route using the Management Tree in the IP/iproute table, fails.
Make sure the interface has status up before adding a route.
DDTS # CSCeg61599
CiscoEdgeCraft Process Not Terminated from Login Screen.
If CiscoEdgeCraft is started and no community string is entered but Logon is pressed, the client will hang for a while before reporting not able to connect. If the user during this presses the X in the upper right corner, the client seems to be closed, but it is actually not (see TaskManager).
Wait for error message and click Exit to close Logon dialog.
DDTS # CSCeg61604
The MCN wizard does not support IP un-numbered configuration in current release.
Since this is a strategically choice for IP configuration and planning of MCN, this needs to be set in ONSCLI. After ONSCLI set-up, select ManagementInterfaces in the Management Tree and use attributes available instead.
DDTS # CSCeg61608
The commissioning wizard does not include new alarm configuration options applicable for ONS 15305 2.0.
Use attributes available under the Management tree instead. Device->AlarmConfig.
DDTS # CSCeg61616
Firewall Considerations for CiscoEdgeCraft vs. NEs. Please consider the following details related to firewalls.
•SNMP SET/GET - UDP 161
•Telnet (ONSCLI) - TCP 23
•Bulk Transfer - default TCP range 4500 - 4510 (editable range and configurable to either True or False. If False normal SNMP GET operations will be used.)
•SNMP traps - UDP 162
•TFTP (software download and config upload)- UDP 69
•Time protocol (RFC868) - UDP 37
DDTS # CSCeg61629
Alarms on AU4 Removed when Restructuring. The problem occurred when restructuring an SDH port on the AUG1 level. If the port is restructured from "au4ToCrossConnect" to "tug3x3", or from "tug3x3" to "au4ToCrossConnect", active alarms on the AU4 managed object are cleared from the active alarm list.
A refresh of the alarm list will show these alarms again.
DDTS # CSCeg61633
WAN to SDH GUI - LCAS Channel Status. Setting LcasChannelStatus when running 'nolcas'.
The user is allowed to manage the LCAS channel status. This settings has no effect if the port is not running in LCAS mode.
DDTS # CSCeg61634
Cbklm Editor Validation. Due to lack of validation in the Cbklm editor, it is possible to create an invalid cross-connection. For example, AU-4 XC in the VC-12 panel. An error message is displayed when saving.
DDTS # CSCeg61638
Mobile Radeon 7500 GFX Chip. When CiscoEdgeCraft/Installation is run as the single java application on the system and the application is closed, this may cause a blue screen on computers with the mobile radeon 7500 gfx chip.
Please update the driver for the chip and/or reference Sun BugParade #4713003.
DDTS # CSCeg61640
Structuring Wizard Validation. Structuring wizard allows operator to set a structure not applicable for ONS 15302 2.0.0 without new GFP WAN module. To avoid this unnecessary "Unsuccessful operation" consider removing the option for accessing the wizard when there are no GFP WAN module present. The same applies when there is no wan module present at all.
DDTS # CSCeg61645
Software download GUI misinform operator when downloading software to ONS 15305. Quite immediately after download of the Network Release package have been triggered from the Software Download GUI, the status bar states "flashing". This is not correct, as the TFTP transfer has just begun. When downloading software/firmware to the ONS15305, this will be a multiple transfer operation, sending one file at the time, until all files enclosed in Network Release zip-file have been downloaded. The flashing process starts when all files have been stored in Compact Flash.
In order to verify flashing process use the following option from the "Management Tree". Menu path CEC: Management Tree->device->SWDownload->SwdlProgress
DDTS # CSCeg61649
Wrong presentation of attributes for WAN ports for the S1.1-8-LC module. The nature of all bridge ports on Ethernet modules is the same and is operational from the Ethernet switch, where they all can be seen as LAN-ports. However, the WAN-ports interfacing the Ethernet over SDH (EoS) mapper does not support other than full duplex 100Mbit/s operation for Ethernet traffic as they are connected to the EoS circuit.
The Ethernet WAN-port presentation of attributes incorrectly allows the operator to change the following attributes: "SpeedAdminMode", "DuplexAdminMode" and "AutoNegotiationMode". Editing these attributes for WAN-ports may lead to low throughput.
Do not edit these attributes for WAN-ports.
Resolved Caveats for Release 2.0.1
This section highlights the resolved caveats for Release 2.0.1
A new solution for filtering of BPDUs is introduced in the maintenance release for the ONS 15302 R2.0. CiscoEdgeCraft Release 2.0.1 has been updated to support the new solution. CiscoEdgeCraft will check if the ONS 15302 R2.0 supports the new solution. If it does, the new solution will be used for these settings. If the ONS 15302 R2.0 is not upgraded to the latest release, CiscoEdgeCraft will use the settings supported by the NE version.
The TSL description is based on the hex value of the received Trail SignalLabel.
New Features and Functionality
This section highlights new features and functionality for Release 2.0. For an overview of features of the Cisco EdgeCraft, consult the Cisco EdgeCraft Software Guide, Release 2.0.
•New commissioning wizard.
•New Management Communication Network (MCN) Wizard.
•Improved Software Download GUI.
•Redesigned WAN-to-SDH mapper GUI.
•Support for ONS 15302 2.0.0 and ONS 15305 2.0.0 and aligned with new features introduced by HW and SW for this product. Refer to release note for NEs for more information.
•This version of CEC introduces polling of NE alarm status. Every minute, the CEC will align status for alarms with the actual NE condition. This can be seen as an enhancement to previous releases, which required a community string reflecting the management pc IP address or manual "refresh" of alarm list.
•Bulk transfer support of large tables will benefit performance and present Notification History and Cross-connect (WAN- and CXC). Notice that this is a TCP session using a range of 10 ports, which may need to be opened if connected through a DCN including a firewall. Default TCP-port range is 4500 - 4510. The range is editable and configurable to either "true" or "false". If "false" normal SNMP GET operations will be used and the Bulk transfer turned off.
This section lists any documentation related to Release 2.0 of Cisco EdgeCraft.
•Release Notes for Cisco ONS 15302 Release 2.0.2
•Release Notes for Cisco ONS 15305 Release 2.0.2
•Release Notes for Cisco Edge Craft Release 2.0
•Cisco EdgeCraft Software Guide, Release 2.0
Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several ways to obtain technical assistance and other technical resources. These sections explain how to obtain technical information from Cisco Systems.
You can access the most current Cisco documentation at this URL:
You can access the Cisco website at this URL:
You can access international Cisco websites at this URL:
Cisco documentation and additional literature are available in a Documentation DVD package, which may have shipped with your product. The Documentation DVD is updated regularly and may be more current than printed documentation. The Documentation DVD package is available as a single unit.
Registered Cisco.com users (Cisco direct customers) can order a Cisco Documentation DVD (product number DOC-DOCDVD=) from the Ordering tool or Cisco Marketplace.
Cisco Ordering tool:
You can find instructions for ordering documentation at this URL:
You can order Cisco documentation in these ways:
•Registered Cisco.com users (Cisco direct customers) can order Cisco product documentation from the Ordering tool:
•Nonregistered Cisco.com users can order documentation through a local account representative by calling Cisco Systems Corporate Headquarters (California, USA) at 408 526-7208 or, elsewhere in North America, by calling 1 800 553-NETS (6387).
You can send comments about technical documentation to email@example.com.
You can submit comments by using the response card (if present) behind the front cover of your document or by writing to the following address:
Attn: Customer Document Ordering
170 West Tasman Drive
San Jose, CA 95134-9883
We appreciate your comments.
Cisco Product Security Overview
Cisco provides a free online Security Vulnerability Policy portal at this URL:
From this site, you can perform these tasks:
•Report security vulnerabilities in Cisco products.
•Obtain assistance with security incidents that involve Cisco products.
•Register to receive security information from Cisco.
A current list of security advisories and notices for Cisco products is available at this URL:
If you prefer to see advisories and notices as they are updated in real time, you can access a Product Security Incident Response Team Really Simple Syndication (PSIRT RSS) feed from this URL:
Reporting Security Problems in Cisco Products
Cisco is committed to delivering secure products. We test our products internally before we release them, and we strive to correct all vulnerabilities quickly. If you think that you might have identified a vulnerability in a Cisco product, contact PSIRT:
•Emergencies — firstname.lastname@example.org
•Nonemergencies — email@example.com
Tip We encourage you to use Pretty Good Privacy (PGP) or a compatible product to encrypt any sensitive information that you send to Cisco. PSIRT can work from encrypted information that is compatible with PGP versions 2.x through 8.x.
Never use a revoked or an expired encryption key. The correct public key to use in your correspondence with PSIRT is the one that has the most recent creation date in this public key server list:
In an emergency, you can also reach PSIRT by telephone:
•1 877 228-7302
•1 408 525-6532
Obtaining Technical Assistance
For all customers, partners, resellers, and distributors who hold valid Cisco service contracts, Cisco Technical Support provides 24-hour-a-day, award-winning technical assistance. The Cisco Technical Support Website on Cisco.com features extensive online support resources. In addition, Cisco Technical Assistance Center (TAC) engineers provide telephone support. If you do not hold a valid Cisco service contract, contact your reseller.
Cisco Technical Support Website
The Cisco Technical Support Website provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The website is available 24 hours a day, 365 days a year, at this URL:
Access to all tools on the Cisco Technical Support Website requires a Cisco.com user ID and password. If you have a valid service contract but do not have a user ID or password, you can register at this URL:
Note Use the Cisco Product Identification (CPI) tool to locate your product serial number before submitting a web or phone request for service. You can access the CPI tool from the Cisco Technical Support Website by clicking the Tools & Resources link under Documentation & Tools. Choose Cisco Product Identification Tool from the Alphabetical Index drop-down list, or click the Cisco Product Identification Tool link under Alerts & RMAs. The CPI tool offers three search options: by product ID or model name; by tree view; or for certain products, by copying and pasting show command output. Search results show an illustration of your product with the serial number label location highlighted. Locate the serial number label on your product and record the information before placing a service call.
Submitting a Service Request
Using the online TAC Service Request Tool is the fastest way to open S3 and S4 service requests. (S3 and S4 service requests are those in which your network is minimally impaired or for which you require product information.) After you describe your situation, the TAC Service Request Tool provides recommended solutions. If your issue is not resolved using the recommended resources, your service request is assigned to a Cisco TAC engineer. The TAC Service Request Tool is located at this URL:
For S1 or S2 service requests or if you do not have Internet access, contact the Cisco TAC by telephone. (S1 or S2 service requests are those in which your production network is down or severely degraded.) Cisco TAC engineers are assigned immediately to S1 and S2 service requests to help keep your business operations running smoothly.
To open a service request by telephone, use one of the following numbers:
Asia-Pacific: +61 2 8446 7411 (Australia: 1 800 805 227)
EMEA: +32 2 704 55 55
USA: 1 800 553-2447
For a complete list of Cisco TAC contacts, go to this URL:
Definitions of Service Request Severity
To ensure that all service requests are reported in a standard format, Cisco has established severity definitions.
Severity 1 (S1)—Your network is "down," or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation.
Severity 2 (S2)—Operation of an existing network is severely degraded, or significant aspects of your business operation are negatively affected by inadequate performance of Cisco products. You and Cisco will commit full-time resources during normal business hours to resolve the situation.
Severity 3 (S3)—Operational performance of your network is impaired, but most business operations remain functional. You and Cisco will commit resources during normal business hours to restore service to satisfactory levels.
Severity 4 (S4)—You require information or assistance with Cisco product capabilities, installation, or configuration. There is little or no effect on your business operations.
Obtaining Additional Publications and Information
Information about Cisco products, technologies, and network solutions is available from various online and printed sources.
•Cisco Marketplace provides a variety of Cisco books, reference guides, and logo merchandise. Visit Cisco Marketplace, the company store, at this URL:
•Cisco Press publishes a wide range of general networking, training and certification titles. Both new and experienced users will benefit from these publications. For current Cisco Press titles and other information, go to Cisco Press at this URL:
•Packet magazine is the Cisco Systems technical user magazine for maximizing Internet and networking investments. Each quarter, Packet delivers coverage of the latest industry trends, technology breakthroughs, and Cisco products and solutions, as well as network deployment and troubleshooting tips, configuration examples, customer case studies, certification and training information, and links to scores of in-depth online resources. You can access Packet magazine at this URL:
•iQ Magazine is the quarterly publication from Cisco Systems designed to help growing companies learn how they can use technology to increase revenue, streamline their business, and expand services. The publication identifies the challenges facing these companies and the technologies to help solve them, using real-world case studies and business strategies to help readers make sound technology investment decisions. You can access iQ Magazine at this URL:
•Internet Protocol Journal is a quarterly journal published by Cisco Systems for engineering professionals involved in designing, developing, and operating public and private internets and intranets. You can access the Internet Protocol Journal at this URL:
•World-class networking training is available from Cisco. You can view current offerings at this URL:
This document is to be used in conjunction with the documents listed in the Related Documentation section.
Copyright © 2005 Cisco Systems, Inc. All rights reserved.