AccessPro PC Card User Guide
Appendix Cabling Specifications
Download this chapter
Feedback
Table of Contents
Cabling Specifications
Cabling Specifications
The tables in this appendix list the pinouts associated with the AccessPro PC card cables, as follows:
- Auxiliary Port Connector DTE Pinout, Table A-1
- BRI Port Pinout (RJ-45), Table A-2
- EIA-530 DTE Serial Cable Pinout (DB-25), Table A-3
- EIA/TIA-232 DTE and DCE Serial Cable Pinouts (DB-25), Table A-4
- EIA/TIA-449 DTE and DCE Serial Cable Pinouts (DB-37), Table A-5
- V.35 DTE and DCE Serial Cable Pinouts (Winchester-Type 34 Pin), Table A-6
- X.21 DTE and DCE Serial Cable Pinouts (DB-15), Table A-7
- Ethernet 10BaseT Connector Pinouts and Signal Descriptions, Table A-8
- Token Ring RJ-45 Connector Pinouts and Signal Descriptions, Table A-9
Table A-1: Auxiliary Port Connector DTE Pinout
| RJ-45 | Normal Function | DB-25 |
|---|---|---|
| 1 | Auxiliary port RTS | 5 |
| 2 | Auxiliary port DTR | 6 |
| 3 | Auxiliary port TxD | 3 |
| 4 | GND | 7 |
| 5 | GND | 7 |
| 6 | Auxiliary port RxD | 2 |
| 7 | Auxiliary port CD | 20 |
| 8 | Auxiliary port CTS | 4 |
Table A-2: BRI Port Pinout (RJ-45)
| 8 Pin1 | TE1 | NT2 | Polarity |
|---|---|---|---|
| 3 | Transmit | Receive | + |
| 4 | Receive | Transmit | + |
| 5 | Receive | Transmit | - |
| 6 | Transmit | Receive | - |
1 TE refers to terminal terminating layer 1 aspects of TE1, TA, and NT2 functional groups.
2 NT refers to network terminating layer 1 aspects of NT1 and NT2 functional groups.
Note All serial cables have a DB-60 connector on the end that attaches to the AccessPro card. The following pinouts represent only the network ends of the cables. Because the pins on the DB-60 connector are small, manufacturing and soldering these cables yourself might be very difficult and is not recommended.
Note In the following tables, serial pinouts for DTE and DCE cables use arrows to indicate signal direction: --> indicates DTE to DCE, and <-- indicates DCE to DTE.
Table A-3: EIA-530 DTE Serial Cable Pinout (DB-25)
| 25 Pin2 | Signal | Direction DTE DCE1 | 25 Pin | Signal | Direction DTE DCE |
|---|---|---|---|---|---|
| J2-1 - |
Shield - |
- - |
J2-8 J2-10 |
CF(A), DCD+ CF(B), DCD- |
<-- <-- |
| J2-2 J2-14 |
BA(A), TxD+ BA(B), TxD- |
--> --> |
J2-15 J2-12 |
DB(A), TxC+ DB(B), TxC- |
<-- <-- |
| J2-3 J2-16 |
BB(A), RxD+ BB(B), RxD- |
<-- <-- |
J2-17 J2-9 |
DD(A), RxC+ DD(B), RxC- |
<-- <-- |
| J2-4 J2-19 |
CA(A), RTS+ CA(B), RTS- |
--> --> |
J2-18 J2-7 |
LL Circuit GND |
--> - |
| J2-5 J2-13 |
CB(A), CTS+ CB(B), CTS- |
<-- <-- |
J2-20 J2-23 |
CD(A), DTR+ CD(B), DTR- |
--> --> |
| J2-6 J2-22 |
CC(A), DSR+ CC(B), DSR- |
<-- <-- |
J2-24 J2-11 |
DA(A), TxCE+ DA(B), TxCE- |
--> --> |
1 A DCE cable is not available for the EIA-530 interface. The EIA-530 interface cannot be operated in DCE mode.
Table A-4: EIA/TIA-232 DTE and DCE Serial Cable Pinouts (DB-25)
| 25 Pin3 | Signal | Direction DTE DCE | 25 Pin | Signal | DirectionDTE DCE |
|---|---|---|---|---|---|
| J2-1 | Shield GND | _ | J2-7 Shield |
Circuit GND - |
- - |
| J2-2 Shield |
TxD - |
--> - |
J2-8 Shield |
DCD - |
<-- - |
| J2-3 Shield |
RxD - |
<-- - |
J2-15 Shield |
TxC - |
<-- - |
| J2-4 Shield |
RTS - |
--> - |
J2-17 Shield |
RxC - |
<-- - |
| J2-5 Shield |
CTS - |
<-- - |
J2-18 Shield |
LTST - |
--> - |
| J2-6 Shield |
DSR - |
<-- - |
J2-20 Shield |
DTR - |
--> - |
| J2-24 Shield |
TxCE - |
--> - |
Table A-5: EIA/TIA-449 DTE and DCE Serial Cable Pinouts (DB-37)
| 37 Pin4 | Signal | Direction DTE DCE | 37 Pin | Signal | Direction DTE DCE |
|---|---|---|---|---|---|
| J2-1 | Shield GND | - | J2-9 J2-27 |
CS+ CS- |
--> --> |
| J2-4 J2-22 |
SD+ SD- |
<-- <-- |
J2-10 J2-37 |
LL SC |
--> - |
| J2-5 J2-23 |
ST+ ST- |
--> --> |
J2-11 J2-29 |
DM+ DM- |
--> --> |
| J2-6 J2-24 |
RD+ RD- |
--> --> |
J2-12 J2-30 |
TR+ TR- |
<-- <-- |
| J2-7 J2-25 |
RS+ RS- |
<-- <-- |
J2-13 J2-31 |
RR+ RR- |
--> --> |
| J2-8 J2-26 |
RT+ RT- |
--> --> |
J2-17 J2-35 |
TT+ TT- |
<-- <-- |
| J2-19 J2-20 |
SG RC |
- - |
Table A-6: V.35 DTE and DCE Serial Cable Pinouts (Winchester-Type 34 Pin)
| 34 Pin5 | Signal | Direction DTE DCE | 34 Pin | Signal | Direction DTE DCE |
|---|---|---|---|---|---|
| J2-A | Frame GND | - | J2-H Shield |
DTR - |
--> - |
| J2-B Shield |
Circuit GND - |
- - |
J2-K Shield |
LT - |
--> - |
| J2-C Shield |
RTS - |
--> - |
J2-P J2-S |
SD+ SD- |
--> --> |
| J2-D Shield |
CTS - |
<-- - |
J2-R J2-T |
RD+ RD- |
<-- <-- |
| J2-E Shield |
DSR - |
<-- - |
J2-U J2-W |
SCTE+ SCTE- |
--> --> |
| J2-F Shield |
RLSD - |
<-- - |
J2-V J2-X |
SCR+ SCR- |
<-- <-- |
| J2-Y J2-AA |
SCT+ SCT- |
<-- <-- |
Table A-7: X.21 DTE and DCE Serial Cable Pinouts (DB-15)
| 15 Pin6 | Signal | Direction DTE DCE |
|---|---|---|
| J2-1 | Shield GND | - |
| J2-2 J2-9 |
Transmit+ Transmit- |
--> --> |
| J2-3 J2-10 |
Control+ Control- |
--> --> |
| J2-4 J2-11 |
Receive+ Receive- |
<-- <-- |
| J2-5 J2-12 |
Indication+ Indication- |
<-- <-- |
| J2-6 J2-13 |
Timing+ Timing- |
<-- <-- |
| J2-8 Shield |
Circuit GND - |
- - |
Table A-8: Ethernet 10BaseT Connector Pinouts and Signal Descriptions
| Pin7 | Description |
|---|---|
| 1 | TX+ |
| 2 | TX- |
| 3 | RX+ |
| 4 | GND |
| 5 | GND |
| 6 | RX- |
| 7 | GND |
| 8 | GND |
Table A-9: Token Ring RJ-45 Connector Pinouts and Signal Descriptions
| Pin8 | Description |
|---|---|
| 1 | GND |
| 2 | GND |
| 3 | TX |
| 4 | RX |
| 5 | RX |
| 6 | TX |
| 7 | GND |
1 Pins 1, 2, 7, and 8 are not used.
2 &&Center&&Any pin not referenced is not connected.
3 &&Center&&Any pin not referenced is not connected.
4 Any pin not referenced is not connected.
5 &&Center&&Any pin not referenced is not connected.
6 Any pin not referenced is not connected.
7 Any pin not referenced is not connected.
8 Any pin not referenced is not connected.