Home | Skip to Content | Skip to Search | Skip to Navigation | Skip to Footer |
Worldwide [change] |Register |About Cisco
Guest

Hierarchical Navigation

Cisco uBR7200 Series Universal Broadband Routers

uBR7200 Series Cable Router Features Available in Cisco IOS Release 12.0 T, 12.0 XR, and 11.3 NA

Downloads

Document ID: 44120


Contents

Introduction
Before You Begin
      Conventions
      Prerequisites
      Components Used
CMTS Feature Table
Related Information

Introduction

This document summarizes all the features that are available in Cisco's Cable Modem Termination Systems (CMTS) since Cisco IOS® Software Release 11.3(5)NA to 12.0T, and 12.0 XR

There have been many enhancements to Cisco's CMTS capabilities on Cisco IOS Software Release 12.0. The table in this document summarizes all of these enhancements.

Before You Begin

Conventions

For more information on document conventions, see the Cisco Technical Tips Conventions.

Prerequisites

There are no specific prerequisites for this document.

Components Used

The information in this document is based on the software and hardware versions listed in the table.

The information presented in this document was created from devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If you are working in a live network, ensure that you understand the potential impact of any command before using it.

CMTS Feature Table

Available With Cisco IOS Software Release:

Category

Feature

11.3(5)NA and 12.0(3)T

Cable Features

Feature Enhancements

11.3(6)NA

  

MC16 Modem Card

11.3(8)NA

  

Access List Support Enhancements

12.0(4)T

  

  • Downstream Channel ID Configuration

  • Multiple Service ID Support

  • Cable Modem and Host Subnet Addressing

12.0(5)T

  

  • Telephone Return

  • Time Server Functionality

12.0(7)T

  

Amplitude Averaging Compensation

12.0(7)XR

  

  • Cable Interface Bundling

  • Enhanced Modem Status Display

  • show interface cable Command Verbose Enhancements

  • IP Address Verification

  • Registration Timeout Configuration

  • show cable modem Command Enhancements

  • Modem Status Summary Enhancements

  • show controller Command Enhancements

  • Configuring Concatenation

  • Virtual Private Network Support

  • Blind Hopping Support on the MC16S Modem Card

  • Signal-to-Noise Ratio Data Support

11.3(9)NA and 12.0(4)T

Cable Quality of Service (QoS)

QoS Profile Enforcement

12.0(4)T

  

QoS for Voice

11.3(9)NA

Network Management

Upstream Traffic Shaping Feature

12.0(5)T

  

  • Enhanced-Spectrum Management

  • Downstream Rate Shaping with TOS bits

12.0(7)XR

  

  • Spectrum Management Using the MC16S Modem Card

  • Downstream Test Signals Configuration

12.0(7)XR

Wireless Features

Point-to-Point Wireless Support

Related Information

Updated: Oct 04, 2005 Document ID: 44120