Bulk Administration Tool User Guide, Release 4.2(1)
Installation
Downloads: This chapterpdf (PDF - 126.0KB) The complete bookPDF (PDF - 1.52MB) | Feedback

Installation

Table Of Contents

Installation

Upgrading BAT

Installing BAT/TAPS

Installing TAPS

Uploading TAPS to the Cisco CRA Server

Uninstalling BAT and TAPS

Completing TAPS Uninstallation


Installation


This chapter provides information about installing, reinstalling, and uninstalling BAT and TAPS. You must install BAT on the same server as the Publisher database for Cisco CallManager. TAPS requires a two-part installation; you must install the first part on the same server as the Publisher database for Cisco CallManager; you can do this during BAT installation. The second part requires installation on the Cisco Customer Response Applications (CRA) server.

During BAT/TAPS installation or reinstallation on the Publisher database server, the setup program halts the following services:

IIS Admin

World Wide Web publishing

FTP publishing

These services automatically restart once the installation is complete.

See Installing TAPS, for instructions on installing the Tool for Auto-Registered Phones Support (TAPS).


Note BAT does not support backward template migration; if you have installed BAT Release 4.2(1), no template migration will occur if you reinstall BAT Release 4.0(1) or 4.1(1).


Related Topics

Installing BAT/TAPS

Uninstalling BAT and TAPS

Upgrading BAT

You can upgrade to BAT Release 4.2(1) from any previous BAT release, but only upgrades from BAT Release 4.1(1) or 4.0(1) provide template migration. BAT automatically migrates existing BAT templates. Default values are automatically provided, however, product-specific configuration for phones and gateways remain blank during migration. For example, an existing BAT template that was created to add 15 Cisco VG200 gateways would migrate, so it contains the new fields provided in BAT Release 4.2(1), such as Cisco CallManager Group ID, but new Product Specific Configuration fields, such as Switchback Timing on Cisco VG200 gateways, will be left blank. Fields in which you had already provided data, such as device pool and calling search space, contain the original data after migration.

CSV files do not migrate.

Follow the instructions in the"Installing BAT/TAPS" section to upgrade to BAT Release 4.2(1).


Note If you are currently using BAT Release 3.0(3), you can upgrade to Release 4.2(1), but no template migration is provided.


Installing BAT/TAPS


Note TAPS is an optional component of BAT. Use the following steps whether or not you plan to install TAPS.


The BAT installation process includes BAT Excel template files that are located in the following default location: C:\CiscoWebs\BAT\ExcelTemplate. Because you are unlikely to have Microsoft Excel installed on the Publisher database server, copy and paste these templates where you have Microsoft Excel installed and use the templates from that location.

Before You Begin

The following prerequisites apply to the BAT/TAPS installation for BAT Release 4.2(1):

Make sure BAT/TAPS is installed on the server running the Publisher database for Cisco CallManager.

If you plan to install TAPS, you must also have purchased and configured a Cisco Customer Response Applications (CRA) server.

Perform the following steps to install BAT (and TAPS, if desired).

Procedure


Step 1 Log on with administrator privileges to the system running the Publisher database for Cisco CallManager.

Step 2 Double-click on the file bat-ffr.4-2-1.exe.

If an existing version of BAT is detected on the server, a prompt asks you to confirm the reinstallation or upgrade. Click Yes to reinstall BAT or to upgrade from a previous version.


Note You can upgrade to BAT Release 4.2(1) from Release 4.0(1) or 4.1(1) and template migration will occur. However, if you are upgrading from BAT Release 3.0(3), no template migration occurs.


Step 3 The Welcome screen displays. Click Next.

The Choose Destination Folder window displays.

Step 4 Click Next to install to the default location C:\CiscoWebs\BAT. Cisco recommends you accept the default installation location.
To install into another folder, click Browse and select the required path.

The Start Copying Files window displays.

Step 5 The configuration and target location information is provided. Confirm this information is correct and then click Next.

Setup begins copying files.

Step 6 Setup allows you to install the Tool for Auto-Registered Phone Support (TAPS). TAPS allows you to update the MAC addresses for phones that were bulk-added in BAT using dummy MAC addresses. By simply dialing into a TAPS directory number, you can later update the phones in the Cisco CallManager database. The phone configuration is downloaded to the phone and the MAC address is updated in Cisco CallManager. See Chapter 6, "Working with TAPS", for more information.

Click Yes to install TAPS or No to skip TAPS installation. If you clicked No, skip to Step 10.

Step 7 The Tool for Auto-Registered Phones Support Setup window displays. Click Next.

The Password window displays.

Step 8 Enter the administrator password for the Publisher server and click Next.

Setup begins copying files.

Step 9 Setup prompts you to run bat-taps-ffr.4-2-1.exe on the Cisco CRA server. See Step 2 in the "Installing TAPS" section for instructions on completing TAPS installation on the Cisco CRA server.

Click OK.

Step 10 The Setup Complete window displays. You have successfully installed BAT. If you chose to install TAPS, you must complete that installation by uploading TAPS to the Cisco CRA server. See Step 2 in the "Installing TAPS" section for instructions.

Click Finish to close Setup.


Related Topics

Upgrading BAT

Uninstalling BAT and TAPS

Completing TAPS Uninstallation

Installing TAPS

TAPS requires a two-part installation. The first part stems from the BAT installation, where you have the choice to install TAPS along with BAT on the server running the Publisher database for Cisco CallManager. The second part installs on the Cisco Customer Response Applications (CRA) server. See Installing BAT/TAPS, for more information about the BAT installation process.

Before You Begin

The following prerequisites apply to the TAPS installation for BAT Release 4.2(1):

Make sure the Publisher database for Cisco CallManager is configured and running. The Publisher database can reside on its own server or on the same server as Cisco CallManager.

The Cisco CRA server is configured.

The Windows 2000 Services window is closed.

BAT is installed on the Publisher database server for Cisco CallManager.

Perform the following steps to complete the TAPS installation.

Procedure


Step 1 Perform the steps in Installing BAT/TAPS, and choose Yes to install TAPS (step 6).

The system copies all TAPS files onto the server running the Publisher database.

Step 2 On the Cisco CRA server, launch the TAPS installation file bat-taps-ffr.4-2-1.exe.

The installation process begins.

Step 3 Enter the primary Cisco CallManager server IP address and click Next.

TAPS installation completes.

Step 4 Click OK.

Step 5 Upload TAPS to the Cisco CRA server. See Uploading TAPS to the Cisco CRA Server, for instructions.


Uploading TAPS to the Cisco CRA Server

TAPS requires uploading a file to the Cisco CRA server. Perform the following steps.

Procedure


Step 1 On the Cisco CRA server, click Start > Programs > Cisco CRA Administrator > Repository Manager.

The Repository Manager window displays.

Step 2 Click Upload.

The Repository Manager dialog box displays.

Step 3 Choose TAPS.aef and click Open.

The file TAPS.aef uploads to the Cisco CRA server.

Step 4 Click OK on the message box that indicates the upload was successful. You must refresh the Application Engine for the change to take effect.

Step 5 Click Start > Programs > Cisco CRA Administrator > Application Administrator.

The Application Administration page displays and you are prompted to enter the password for access to the Cisco CRA machine.

Step 6 In the Password dialog, log on using the user name and password that you use to access the Cisco CRA server.

Step 7 Click Engine.


Note If you have not already configured the initial setup for Directory, a prompt asks you to do so. See the Application Administration documentation for details; then, return to these steps once you complete the initial setup.


Step 8 Add TAPS as an application. See the Cisco CRA documentation for instructions on how to add an application.

Step 9 Click Refresh Scripts.

Step 10 Click Refresh.


Uninstalling BAT and TAPS

Use the following steps to uninstall BAT and the first part of TAPS, or use Add/Remove Programs in the Control Panel.

The uninstall program removes the BAT and TAPS applications and BAT Excel template files stored in the ...\BAT\ExcelTemplate folder but does not remove any CSV files or BAT templates that you created and saved to the C:\BATFiles or C:\CiscoWebs\BAT\Templates folders.

After completing the following steps on the server running the Publisher database for Cisco CallManager, you must complete the uninstallation of TAPS on the Cisco CRA server.

Perform the following steps to uninstall BAT.

Procedure


Step 1 On the server running the Publisher database for Cisco CallManager, click Start > Programs > Cisco CallManager 3.1 > Bulk Admin Tool > Uninstall BAT.

A dialog box requests confirmation of the uninstall request.

Step 2 Click OK to uninstall BAT or Cancel to exit the uninstaller.

The IIS Admin service stops, files are deleted, and the IIS Admin service restarts.

Step 3 Click OK to exit the uninstaller.

Step 4 BAT and the first part of TAPS have been uninstalled. To completely remove TAPS, you must also perform the steps in the "Completing TAPS Uninstallation" section.


Related Topics

Installing BAT/TAPS

Chapter 6, "Working with TAPS"

Completing TAPS Uninstallation

TAPS requires a two-part uninstallation and cannot be uninstalled separately from BAT. Uninstalling BAT also uninstalls TAPS from the server running the Publisher database. Perform the following steps to uninstall TAPS from the Cisco CRA server. This procedure completes the TAPS uninstallation.


Step 1 On the Cisco CRA server, click Start > Settings > Control Panel > Add/Remove Programs.

Step 2 Choose Taps and click the Change/Remove button.

A message displays confirming the uninstall operation.

Step 3 Click Yes to uninstall or No to cancel.

If you clicked Yes, TAPS uninstalls from the Cisco CRA server.

Step 4 Click OK to exit the uninstallation.


Related Topics

Uninstalling BAT and TAPS