Cisco CallManager Administration Guide, Release 3.3(2)
Cisco IP Phone Configuration
Downloads: This chapterpdf (PDF - 433.0KB) The complete bookPDF (PDF - 4.79MB) | Feedback

Cisco IP Phone Configuration

Table Of Contents

Cisco IP Phone Configuration

Configuring Cisco IP Phones

Displaying the MAC Address of a Phone

Adding a Phone

Copying an Existing Phone

Resetting a Phone

Updating a Phone

Deleting a Phone

Phone Configuration Settings

Configuring Speed-Dial Buttons

Speed Dial Configuration Settings

Configuring Cisco IP Phone Services

Subscribing to a Service

Updating Services

Unsubscribing from a Service

Finding a Phone

Configuring Directory Numbers

Adding a Directory Number

Updating a Directory Number

Deleting a Directory Number

Directory Number Configuration Settings


Cisco IP Phone Configuration


Cisco IP Phones as full-featured telephones can plug directly into your IP network. You can use the Cisco CallManager Administration phone configuration windows to configure the following Cisco IP Phones and devices:

Cisco IP Phone 7900 family (models 7960, 7940, 7935, 7910, and 7905)

Cisco IP Phone model 30 VIP

Cisco IP Phone model 12 SP+

H.323 clients

Computer Telephony Integration (CTI) ports

Cisco ATA 186 telephone adapter

Cisco VG248 Analog Phone Gateway


Note You configure the Cisco VG248 phone ports from the Gateway Configuration window of Cisco CallManager Administration. The following procedures apply for updating or deleting Cisco VG248 phone ports. See the "Gateway Configuration" section for Cisco VG248 gateway configuration information.


After you add a Cisco IP Phone to Cisco CallManager Administration, information from the RIS Data Collector service displays in the Phone Configuration window. When available, the IP address of the device and the name of the Cisco CallManager with which the device registered display.

The following topics provide information about working with and configuring Cisco IP Phones in Cisco CallManager Administration:

Configuring Cisco IP Phones

Gateway Configuration

Finding a Phone

Configuring Directory Numbers

Phone Button Template Configuration

Phone Configuration Settings

Phone Configuration Checklist, Cisco CallManager System Guide

Configuring Cisco IP Phones

You can add phones to the Cisco CallManager database automatically by using auto-registration, manually by using the phone configuration windows, or in groups with the Cisco Bulk Administration Tool (BAT). By enabling auto-registration, you can automatically add a Cisco IP Phone to the Cisco CallManager database when you connect the phone to your IP telephony network. During auto-registration, Cisco CallManager assigns the next available sequential directory number to the phone. In many cases, you might not want to use auto-registration; for example, if you want to assign a specific directory number to a phone. If you do not use auto-registration, you must manually add phones to the Cisco CallManager database or use BAT. BAT, a plug-in application, enables system administrators to perform batch add, modify, and delete operations on large numbers of Cisco IP Phones. Refer to the Bulk Administration Tool Guide for Cisco CallManager for detailed instructions on using BAT.

After you add a Cisco IP Phone to Cisco CallManager Administration, the RIS Data Collector service displays the device name, registration status, and the IP address of the Cisco CallManager to which it is registered in the Phone Configuration window.

For information on how to configure phones as well as H.323 clients, CTI ports, and other devices from Cisco CallManager Administration, see the following topics:

Cisco IP Phone Configuration

Gateway Configuration

Displaying the MAC Address of a Phone

Adding a Phone

Deleting a Phone

Resetting a Phone

Updating a Phone

Copying an Existing Phone

Phone Configuration Settings

Configuring Speed-Dial Buttons

Speed Dial Configuration Settings

Cisco IP Phones, Cisco CallManager System Guide

Phone Configuration Checklist, Cisco CallManager System Guide

Displaying the MAC Address of a Phone

The Media Access Control (MAC) address comprises a unique, 12-character, hexadecimal number that identifies a Cisco IP Phone or other hardware device. Locate the number on a label on the bottom of the phone (for example, 000B6A409C405 for Cisco IP Phone 7900 family models or SS-00-0B-64-09-C4-05 for Cisco IP Phone models SP 12+ and 30 VIP). Cisco CallManager makes the MAC address a required field for Cisco IP Phone device configuration. When entering the MAC address in Cisco CallManager fields, do not use spaces or dashes and do not include the "SS" that may precede the MAC address on the label.

To display the MAC address when the phone is powered on, perform the following steps:

Cisco IP Phone 7960 and 7940 models—Press Settings, use the arrow buttons to highlight the Network Configuration menu option, and press the Select softkey.

Cisco IP Conference Station 7935—Press Menu, use the arrow buttons to highlight the Admin Setup menu option, and press Select. Enter the administrator password (default is **#) and press the Enter softkey. Use the arrow buttons to scroll through the system information (to find the MAC address).

Cisco IP Phone 7910—Press Settings, use the arrow buttons to locate Network Config options, and press 6 on the phone keypad to begin displaying the Network Config options; then, use the arrow keys to scroll the Network Config option display to the MAC address.

Cisco IP Phone models 12 SP+ and 30 VIP—Press ** to display the MAC address on the second line of the LCD display.

Cisco VG248 phone ports—The MAC address specifies the endpoint from the Gateway Configuration window of Cisco CallManager Administration. See the "Gateway Configuration" section for configuration information.

For more information about displaying additional configuration settings on Cisco IP Phones, refer to the Cisco IP Phone Administration Guide for Cisco CallManager, the Cisco IP Conference Station 7935 Administration Guide, and other phone documentation provided with Cisco IP Phones.

Related Topics

Cisco IP Phone Configuration

Gateway Configuration

Adding a Phone

Updating a Phone

Cisco IP Phones, Cisco CallManager System Guide

Phone Configuration Checklist, Cisco CallManager System Guide

Adding a Phone

Before a Cisco IP Phone can be used, you must use this procedure to add the phone to Cisco CallManager. You can also use this procedure to configure H.323 clients, CTI ports, Cisco ATA 186 telephone adapter, or the Cisco VG248 Analog Phone Gateway (each of the 48 ports is recognized and configured as a phone). H.323 clients can be Symbol NetVision phones or Microsoft NetMeeting clients. CTI ports designate virtual devices that are used by Cisco CallManager applications such as Cisco SoftPhone and Cisco AutoAttendant.


Note If you are planning to use a TAPI application to control CTI port devices that are using the Cisco TAPI Service Provider (TSP), then you may only configure one line per CTI port device.



Note Add the Cisco VG248 Phone Ports from the Gateway Configuration window of Cisco CallManager Administration. See the "Gateway Configuration" section for configuration information.


Procedure


Step 1 Choose Device > Add a Device.

The Add a New Device window displays.

Step 2 From the Device Type drop-down list box, choose Phone and click Next.

The Add a New Phone window displays.

Step 3 From the Phone type drop-down list, choose the appropriate phone type or device and click Next. After you choose a phone type, you cannot modify it.

The Phone Configuration window displays.

Step 4 Enter the appropriate settings as described in Table 47-1.

Only the settings that are appropriate to the chosen phone type appear in your window.

Step 5 Click Insert.

A message displays stating that the phone has been added to the database.

Step 6 To add a directory number to this phone, click OK and enter the appropriate settings in the Directory Number Configuration window as described in the "Directory Number Configuration Settings" section. To return to the Phone Configuration window, click Cancel.

After you add a Cisco IP Phone to Cisco CallManager Administration, information from the RIS Data Collector service displays in the Phone Configuration window. When available, the IP address of the device and the name of the Cisco CallManager with which the device registered display as illustrated in Figure 47-1.

Figure 47-1 Phone Configuration Window

Step 7 Reset the phone after making changes to apply the new settings. See the "Resetting a Phone" section.


Next Steps

If you want to configure speed-dial buttons to this phone, see the "Configuring Speed-Dial Buttons" section. If you want to configure services for this phone, see the "Configuring Cisco IP Phone Services" section.

Related Topics

Cisco IP Phone Configuration

Gateway Configuration

Resetting a Phone

Adding a Directory Number

Deleting a Phone

Updating a Phone

Phone Configuration Settings

Configuring Speed-Dial Buttons

Cisco IP Phones, Cisco CallManager System Guide

Phone Configuration Checklist, Cisco CallManager System Guide

Copying an Existing Phone

If you want to manually add several similar phones to the Cisco CallManager database, you can add one and then copy its basic settings to apply to another phone. You must change at least the Media Access Control (MAC) address before inserting the new phone into the database.

To copy phone settings, perform the following procedure.

Procedure


Step 1 Choose Device > Phone.

The Find and List Phones window displays.

Step 2 Enter search criteria to locate a specific phone and click Find.

A list of phones that match the search criteria appears.

Step 3 Click the Copy icon for the phone whose settings you want to copy.

The Phone Configuration window displays.

Step 4 Enter the MAC address of the new phone.


Note For information on obtaining the MAC address, see the "Displaying the MAC Address of a Phone" section.


Step 5 Update the appropriate settings as described in Table 47-1.

Step 6 Click Insert.

A message displays that states that the phone has been added to the database.

Step 7 To add a directory number to this phone, click OK and enter the appropriate settings in the Directory Number Configuration window as described in the "Directory Number Configuration Settings" section. To return to the Phone Configuration window, click Cancel.


Related Topics

Cisco IP Phone Configuration

Finding a Phone

Adding a Phone

Resetting a Phone

Updating a Phone

Deleting a Phone

Phone Configuration Settings

Configuring Speed-Dial Buttons

Adding a Directory Number

Cisco IP Phones, Cisco CallManager System Guide

Phone Configuration Checklist, Cisco CallManager System Guide

Resetting a Phone

You must reset a Cisco IP Phone after you add a directory number or update its settings for your changes to take affect. To reset a Cisco IP Phone by using Cisco CallManager Administration, perform the following procedure.


Note If a call is in progress, the phone does not reset until the call finishes.


Procedure


Step 1 Choose Device > Phone.

The Find and List Phones window displays.

Step 2 To locate a specific phone, enter search criteria and click Find.

A list of phones that match the search criteria displays as illustrated in Figure 47-2.

Figure 47-2 Find and List Phones Window

Step 3 Check the check boxes next to the phones that you want to reset. To select all the phones in the window, check the check box in the matching records title bar.

Step 4 Click Reset Phone.

The Reset Device window displays.

Step 5 Click one of the following buttons:

Restart—Restarts the selected devices without shutting them down (reregisters the phones with Cisco CallManager).

Reset—Shuts down the selected devices and brings them back up (performs a complete shutdown and reinitialization of the phones).

Close—Returns you to the previous window without restarting or resetting the selected devices.


Related Topics

Cisco IP Phone Configuration

Adding a Phone

Updating a Phone

Cisco IP Phones, Cisco CallManager System Guide

Phone Configuration Checklist, Cisco CallManager System Guide

Updating a Phone

To update a Cisco IP Phone by using Cisco CallManager Administration, perform the following procedure.

Procedure


Step 1 Choose Device > Phone.

The Find and List Phones window displays.

Step 2 To locate a specific phone, enter search criteria and click Find.

A list of phones that match the search criteria appears.

Step 3 From the list, click the name of the phone that you want to update.

The Phone Configuration window displays.

Step 4 Update the appropriate settings as described in Table 47-1.

Step 5 Click Update.

Step 6 Click Reset Phone to reset or restart the phone and apply the new settings.

Restarting the phone reregisters the phones with Cisco CallManager without shutting the phone down. Resetting the phone shuts down the phone and brings it back up (performs a complete shutdown and reinitialization of the phones).


Related Topics

Cisco IP Phone Configuration

Gateway Configuration

Adding a Phone

Resetting a Phone

Phone Configuration Settings

Configuring Speed-Dial Buttons

Speed Dial Configuration Settings

Finding a Phone

Cisco IP Phones, Cisco CallManager System Guide

Phone Configuration Checklist, Cisco CallManager System Guide

Deleting a Phone

To delete a Cisco IP Phone by using Cisco CallManager Administration, perform the following procedure.

Procedure


Step 1 Choose Device > Phone.

The Find and List Phones window displays.

Step 2 To locate a specific phone, enter search criteria and click Find.

A list of phones that match the search criteria displays as illustrated in Figure 47-3.

Figure 47-3 Find and List Phones Window

Step 3 Perform one of the following actions:

Check the check boxes next to the phones that you want to delete and click Delete Selected.

Delete all the phones in the window by checking the check box in the matching records title bar and clicking Delete Selected.

Choose the name of the phone that you want to delete from the list to display its current settings and click Delete.

A confirmation dialog displays.

Step 4 Click OK.


Related Topics

Cisco IP Phone Configuration

Gateway Configuration

Finding a Phone

Adding a Phone

Cisco IP Phones, Cisco CallManager System Guide

Phone Configuration Checklist, Cisco CallManager System Guide

Phone Configuration Settings

Table 47-1 describes the available settings in the Phone Configuration window.


Note The Product-Specific Configuration section contains model-specific fields the phone manufacturer defines. Cisco CallManager dynamically populates the fields with default values.

To view field descriptions and help for product-specific configuration items, click the "i" information icon to the right of the Product Specific Configuration heading to display help in a popup window.

If you need more information, refer to the documentation for the specific phone that you are configuring or contact the manufacturer


Table 47-1 Phone Configuration Settings 

Field
Description

Device Information

MAC Address

Enter the Media Access Control (MAC) address that identifies Cisco IP Phones (hardware phones only). Make sure that the value comprises 12 hexadecimal characters.

See the "Displaying the MAC Address of a Phone" section for information on how to access the MAC address.

Cisco VG248 Analog Phone Gateway

The MAC address for the Cisco VG248 gateway specifies the endpoint from the Gateway Configuration window of Cisco CallManager Administration. See the "Gateway Configuration" section for configuration information.

Only one MAC address exists for the Cisco VG248 Analog Phone Gateway. All 48 ports share the same MAC address. Cisco CallManager requires unique MAC addresses for all devices.

Cisco CallManager converts the MAC Address for each device by

Dropping the first two digits of the MAC Address

Shifting the MAC address two places to the left

Adding the two-digit port number to the end of the MAC address (to the right of the number)

EXAMPLE
MAC Address for the Cisco VG248 is
000039A44218
the MAC address for registered port 12 in the
Cisco CallManager is
0039A4421812

Device Name

Enter a name to identify software-based telephones. The value can include 1 to 15 characters, including alphanumeric, dot, dash, and underscores. Cisco CallManager makes this field available only for H.323 clients and CTI ports.

Description

Identify the purpose of the device. You can enter the user name (such as John Smith) or the phone location (such as Lobby) in this field.

For Cisco VG248 gateways, begin the description with VGC<mac address>.

Device Pool

Choose the device pool to which you want this phone assigned. The device pool defines sets of common characteristics for devices, such as region and date/time group.

The value that you choose overrides the default value for this type of device. See the "Device Defaults Configuration" section.

Calling Search Space

Choose the appropriate calling search space. A calling search space comprises a collection of partitions that are searched to determine how a dialed number should be routed.

AAR Calling Search Space

Choose the appropriate calling search space for the device to use when it performs automated alternate routing (AAR). The AAR calling search space specifies the collection of route partitions that are searched to determine how to route a collected (originating) number that is otherwise blocked due to insufficient bandwidth.

Media Resource Group List

Choose the appropriate Media Resource Group List. A Media Resource Group List comprises a prioritized grouping of media resource groups. An application chooses the required media resource, such as a Music On Hold server, from the available media resources according to the priority order that is defined in a Media Resource Group List.

If you choose <none>, Cisco CallManager uses the Media Resource Group that is defined in the device pool.

For more information, see the "Media Resource Management" section in the Cisco CallManager System Guide.

User Hold Audio Source

To specify the audio source that plays when a user initiates a hold action, click the drop-down arrow and choose an audio source from the list that displays.

If you do not choose an audio source, Cisco CallManager uses the audio source that is defined in the device pool or the system default if the device pool does not specify an audio source ID.

Note You define audio sources in the Music On Hold Audio Source Configuration window. For access, choose Service > Music On Hold.

Network Hold Audio Source

To specify the audio source that is played when the network initiates a hold action, click the drop-down arrow and choose an audio source from the list that displays.

If you do not choose an audio source, Cisco CallManager uses the audio source that is defined in the device pool or the system default if the device pool does not specify an audio source ID.

Note You define audio sources in the Music On Hold Audio Source Configuration window. For access, choose Service > Music On Hold.

Location

Choose the appropriate location for this Cisco IP Phone. The location specifies the total bandwidth that is available for calls to and from this location. A location setting of None means that the locations feature does not keep track of the bandwidth that is consumed by this Cisco IP Phone.

Note If this phone uses the Barge feature, set the Location to None.

User Locale

From the drop-down list box, choose the locale that is associated with the phone user interface. The user locale identifies a set of detailed information to support users, including language and font.

Cisco CallManager makes this field available only for Cisco IP Phone 7940 and 7960 models.

Note If no user locale is specified, Cisco CallManager uses the user locale that is associated with the device pool.

Note If the users require information to be displayed (on the phone) in any language other than English, verify that the locale installer is installed before configuring user locale. Refer to the Cisco IP Telephony Locale Installer documentation.

Network Locale

From the drop-down list box, choose the locale that is associated with the phone. The network locale contains a definition of the tones and cadences that are used by the phone in a specific geographic area.

Cisco CallManager makes this field available only for Cisco IP Phone 7940 and 7960 models, and Cisco VGCPhones (phones that use the Cisco VG248 Gateway).

Note If no network locale is specified, Cisco CallManager uses the network locale associated with the device pool.

Note If the users require information to be displayed (on the phone) in any language other than English, verify that the locale installer is installed before configuring network locale. Refer to the Cisco IP Telephony Locale Installer documentation.

Phone Button and Expansion Module Template Information

Phone Button Template

Choose the appropriate phone button template. The phone button template determines the configuration of buttons on a phone and identifies which feature (line, speed dial, and so on) is used for each button.

The value that you enter overrides the default value for this type of device. See the "Device Defaults Configuration" section.

Cisco CallManager does not make this field available for H.323 clients or CTI ports.

Expansion Module 1

If your phone is connected to a Cisco IP Phone 7914 Expansion Module, choose the appropriate template.

Expansion Module 2

If your phone is connected to a second Cisco IP Phone 7914 Expansion Module, choose the appropriate template.

Softkey Template Information

Softkey Template

Choose the appropriate softkey template. The softkey template determines the configuration of the softkeys on the Cisco IP Phones 7960 and 7940.

Firmware Load Information (leave blank to use default)

Phone Load Name

Enter the custom software for the Cisco IP Phone.

The value that you enter overrides the default value for the current model. For more information, see the "Device Defaults Configuration" section.

Cisco CallManager does not make this field available for H.323 clients or CTI ports.

For more information about Cisco IP Phone software and configuration, refer to the Cisco IP Phone Administration Guide for Cisco CallManager.

Module 1 Load Name

Enter the custom software for the Cisco IP Phone 7914 Expansion Module, if applicable.

The value that you enter overrides the default value for the current model.

Module 2 Load Name

Enter the custom software for the second Cisco IP Phone 7914 Expansion Module, if applicable.

The value that you enter overrides the default value for the current model.

Cisco IP Phone—External Data Locations (leave blank to use default)

Information

Enter the location (URL) of the help text for the information (i) button. Leave this field blank to accept the default setting.

Cisco CallManager displays this field only for Cisco IP Phone 7960 and 7940 models.

Directory

Enter the server from which the phone obtains directory information. Leave this field blank to accept the default setting.

Cisco CallManager displays this field only for Cisco IP Phone 7960 and 7940 models.

Messages

Leave this field blank (not used by Cisco CallManager).

Services

Enter the location (URL) for Cisco IP Phone Services. Leave this field blank to accept the default setting.

Cisco CallManager displays this field only for Cisco IP Phone 7960 and 7940 models.

Authentication Server

Enter the URL that the phone uses to validate requests that are made to the phone web server. If you do not provide an authentication URL, the advanced features on the Cisco IP Phone 7960 and 7940 that require authentication will not function.

By default, this URL accesses a Cisco IP Phone User Options window that was configured during installation.

Leave this field blank to accept the default setting.

Proxy Server

Enter the host and port (for example, proxy.cisco.com:80) that are used to proxy HTTP requests for access to non-local host addresses from the phone HTTP client.

If the phone receives a URL such as www.cisco.com in a service and the phone is not configured in the cisco.com domain, the phone uses the proxy server to access the URL. If the phone is configured in cisco.com domain, the phone accesses the URL without using the proxy because it is in the same domain as the URL.

If you do not configure this URL, the phone attempts to connect directly to the URL.

Leave this field blank to accept the default setting.

Idle

Enter the URL that displays on the Cisco IP Phone 7960 and Cisco IP Phone 7940 LCD when the phone has not been used for the time specified in Idle Timer field. For example, you can display a logo on the LCD when the phone has not been used for 5 minutes.

Leave this field blank to accept the default setting.

Cisco CallManager displays this field only for Cisco IP Phone 7960 and 7940 models.

Idle Timer (seconds)

Enter the time (in seconds) that you want to elapse before the URL that is specified in the Idle field displays.

Leave this field blank to accept the value of the Idle URL Timer enterprise parameter.

Cisco CallManager displays this field only for Cisco IP Phone 7960 and 7940 models.

Extension Mobility (Device Profile) Information

Enable Extension Mobility Feature

Check this check box if this phone supports extension mobility.

Log Out Profile

Choose an option from the drop-down selection box. Options include Use Current Device Settings and Select a User Device Profile. When you choose Select a User Device Profile, a configuration window displays for you to choose the user device profile that was already configured.

Log In User ID

This field remains blank until a user logs in.

Log In Time

This field remains blank until a user logs in.

Log Out Time

This field remains blank until a user logs in and logs out.

Product Specific Configuration

Disable Speakerphone

Check this check box to disable the speakerphone for this phone.

Disable Speakerphone and Headset

Check this check box to disable the speakerphone and headset for this phone.

Forwarding Delay

Choose whether the forwarding delay for this phone is enabled or disabled.

PC Port

Choose whether the PC port for this phone is enabled or disabled.

Settings Access

Choose whether the user has access to phone settings. The options include Enabled and Disabled.


Configuring Speed-Dial Buttons

You use Cisco CallManager Administration to configure speed-dial buttons for phones if you want to provide speed-dial buttons for users or if you are configuring phones that do not have a specific user assigned to them. Users use the Cisco IP Phone User Options windows to change the speed-dial buttons on their phones.

Procedure


Step 1 From the Phone Configuration window, click the Add/Update Speed Dials link at the top of the window.


Note To display the Phone Configuration window, choose Device > Phone. Enter your search criteria and click Find. Choose the phone for which you want to configure speed-dial buttons.


Step 2 Enter the appropriate settings as described in Table 47-2.

Step 3 To apply the changes, click Update or click Update and Close to apply the changes and close the dialog box.


Related Topics

Cisco IP Phone Configuration

Resetting a Phone

Adding a Directory Number

Updating a Directory Number

Cisco IP Phones, Cisco CallManager System Guide

Phone Features, Cisco CallManager System Guide

Phone Configuration Checklist, Cisco CallManager System Guide

Speed Dial Configuration Settings

Table 47-2 describes the speed-dial button configuration settings.

Table 47-2 Speed Dial Configuration Settings 

Field
Description

Speed Dial

This field identifies the speed-dial button on the phone or on the Cisco IP Phone 7914 Expansion Module (for example, 1, 2, 3, or 4).

Number

Enter the number that you want the system to dial when the user presses the speed-dial button.

Label

Enter the text that you want to appear for the speed-dial button.

Cisco CallManager does not make this field available for the Cisco IP Phone 7910.

Character Set

Choose the language in which the characters display on the speed-dial button.


Related Topics

Cisco IP Phone Configuration

Adding a Directory Number

Updating a Directory Number

Configuring Speed-Dial Buttons

Cisco IP Phones, Cisco CallManager System Guide

Phone Features, Cisco CallManager System Guide

Phone Configuration Checklist, Cisco CallManager System Guide

Configuring Cisco IP Phone Services

From a Cisco IP Phone 7960 and 7940, users can access information services, such as weather, stock quotes, or other services that are available to their company. Using Cisco CallManager Administration, you can set up the available services for phones. Users use the Cisco IP Phone User Options windows to modify the services. For information about the Cisco IP Phone User Options windows, refer to the Cisco IP Phone 7960/7940 User Guide. For more information on maintaining services in Cisco CallManager Administration, see the "Cisco IP Phone Services Configuration" section.

Subscribing to a Service

To subscribe to new services for a phone, perform the following steps.

Before You Begin

Add the services to Cisco CallManager. For more information, see the "Adding a Cisco IP Phone Service" section.

Procedure


Step 1 Choose Device > Phone.

The Find and List Phones window displays.

Step 2 To locate a specific phone, enter search criteria and click Find.

A list of phones that match the search criteria appears.

Step 3 Choose the phone to which you want to add a service.

The Phone Configuration window displays.

Step 4 On the upper, right side of the window, click the Subscribe/Unsubscribe Services link.

Step 5 From the Select a Service drop-down list box, choose the service that you want to add to the phone.

Step 6 Click Continue.

The window displays with the service that you chose. If you want to choose a different service, click Back and repeat Step 5.

Step 7 Click Subscribe.

The service appears in the Your Subscribed Services list.


Related Topics

Resetting a Phone

Updating Services

Unsubscribing from a Service

Adding a Cisco IP Phone Service

Phone Configuration Checklist, Cisco CallManager System Guide

Updating Services

Perform the following steps to update a service. You can update the service name and service parameter values, if necessary.

Procedure


Step 1 Choose Device > Phone.

The Find and List Phones window displays.

Step 2 To locate a specific phone, enter search criteria and click Find.

A list of phones that match the search criteria appears.

Step 3 Choose the phone for which you want to update a service.

The Phone Configuration window displays.

Step 4 On the upper, right side of the window, click the Update Services link.

Step 5 From the Your Subscribed Services list, choose a service.

Step 6 Update the appropriate parameter and click Update.


Related Topics

Cisco IP Phone Configuration

Resetting a Phone

Unsubscribing from a Service

Adding a Cisco IP Phone Service

Phone Configuration Checklist, Cisco CallManager System Guide

Unsubscribing from a Service

To unsubscribe from a service, perform the following steps.

Procedure


Step 1 Choose Device > Phone.

The Find and List Phones window displays.

Step 2 Enter search criteria to locate a specific phone and click Find.

A list of phones that match the search criteria appears.

Step 3 Choose the phone from which you want to delete a service.

The Phone Configuration window displays.

Step 4 On the upper, right side of the window, click the Subscribe/Unsubscribe Services link.

Step 5 From the Your Subscribed Services list, choose a service.

Step 6 Click Unsubscribe.

A warning message verifies that you want to unsubscribe from the service.

Step 7 Click OK to unsubscribe or click Cancel to restore your previous settings.


Related Topics

Cisco IP Phone Configuration

Resetting a Phone

Subscribing to a Service

Adding a Cisco IP Phone Service

Phone Configuration Checklist, Cisco CallManager System Guide

Finding a Phone

Because you might have thousands of Cisco IP Phones in your network, Cisco CallManager lets you search for phones based on specified criteria. Follow these steps to search for a specific Cisco IP Phone in the Cisco CallManager database.


Note The Cisco VG248 Gateway will not display when you search for phones. You can search for the Cisco VG248 Analog Phone ports from the Find and List Phones window of the Cisco CallManager Administration. See the "Gateway Configuration" section for configuration information on the Cisco VG248 Gateway.



Tip For methods to limit your search, refer to the "Phone Search" section in the Cisco CallManager System Guide.


Procedure


Step 1 Choose Device > Phone.

The Find and List Phones window displays.

Step 2 Choose the field that you want to use to locate a phone.


Note To find all phones that are registered in the database, choose Device Name from the list of fields and choose "is not empty" from the list of patterns; then, click Find.


Step 3 Choose the appropriate search pattern for your text search. If you do not want to perform a text search, choose "is empty."

Step 4 Enter your search text, if any, in the Find field.

Step 5 If you choose calling search space or device pool in Step 2, the options that are available in the database display. From the drop-down list box below the Find button, you can choose one of these options.

Step 6 Click Find.

A list of devices that match the criteria appears. The field that you chose in Step 2 determines how the devices in the list are sorted.

This window also lists the total number of devices and windows in this window.

Step 7 To view the next set of discovered devices, click Next.


Note You can delete or reset multiple phones from the Find and List Phones window by checking the check boxes next to the appropriate phones and clicking Delete Selected to delete the phones or clicking Reset Selected to reset the phones. You can choose all the phones in the window by checking the check box in the matching records title bar.



Related Topics

Configuring Cisco IP Phones

Gateway Configuration

Cisco IP Phones, Cisco CallManager System Guide

Phone Configuration Checklist, Cisco CallManager System Guide

Configuring Directory Numbers

Using Cisco CallManager, you can configure and modify directory numbers that are assigned to specific phones. These sections provide instructions for working with directory numbers.

Use this area of Cisco CallManager Administration to perform tasks such as adding or removing directory numbers, configuring call forward, call pickup, and call waiting, setting the display text that appears on the called party phone when a call is placed from a line, and disabling ring on a line.

Related Topics

Adding a Directory Number

Deleting a Directory Number

Updating a Directory Number

Directory Number Configuration Settings

Adding a Directory Number

Follow these instructions to add a directory number to a specific phone. You can configure the call waiting, call forward, and call pickup phone features while you are adding the directory number.

Before You Begin

You must add a Cisco IP Phone to Cisco CallManager before adding a directory number. See the "Adding a Phone" section for details.

Procedure


Step 1 Choose Device > Phone.

The Find and List Phones window displays.

Step 2 Enter search criteria to locate a specific phone and click Find.

A list of phones that match the search criteria displays.

Step 3 Click the device name to which you want to add a directory number.

The Phone Configuration window displays.

Step 4 In the Directory Numbers list, click an unassigned line, such as Line 1 or Line 2.

The Configure a Directory Number window displays.

Step 5 Enter the appropriate settings as described in Table 47-3.

Step 6 Click Insert.

A message displays that states that the directory number has been added to the database.

Step 7 To display the Phone Configuration window, click OK. To return to the Directory Number Configuration window, click Cancel.

Step 8 For the changes to take effect, click Restart Devices.

A messages indicates the number of devices that you want to restart.

Step 9 Click OK to restart the devices, or click Cancel to cancel the process.


Note Devices restart as soon as possible. During this process, the system may drop calls on gateways.



Related Topics

Cisco IP Phone Configuration

Finding a Phone

Adding a Phone

Deleting a Directory Number

Updating a Directory Number

Directory Number Configuration Settings

Cisco IP Phones, Cisco CallManager System Guide

Phone Features, Cisco CallManager System Guide

Phone Configuration Checklist, Cisco CallManager System Guide

Updating a Directory Number

Follow these instructions to update a directory number that is assigned to a specific phone.

Procedure


Step 1 Choose Device > Phone.

The Find and List Phones window displays.

Step 2 Enter search criteria to locate a specific phone.

A list of phones that match the search criteria displays.

Step 3 Click the name of the phone to update.

The Phone Configuration window displays.

Step 4 From the Directory Numbers list, click the line that you want to update.

The Directory Number Configuration window displays.


Note If your phone uses a Cisco IP Phone 7914 Expansion Module, the Directory Numbers list displays the lines for the phone and for the Cisco IP Phone 7914 Expansion Module.


Step 5 Update the appropriate settings as described in Table 47-3.

Step 6 Click Update.

Step 7 For the changes to take effect, click Restart Devices.

A message indicates the number of devices that you want to restart.

Step 8 Click OK to restart the devices or click Cancel to cancel the process.


Note Devices restart as soon as possible. During this process, Cisco CallManager may drop calls on gateways.



Related Topics

Cisco IP Phone Configuration

Gateway Configuration

Finding a Phone

Adding a Phone

Adding a Directory Number

Deleting a Directory Number

Directory Number Configuration Settings

Cisco IP Phones, Cisco CallManager System Guide

Phone Features, Cisco CallManager System Guide

Phone Configuration Checklist, Cisco CallManager System Guide

Deleting a Directory Number

Perform the following procedure to delete a directory number from a specific phone.

Procedure


Step 1 Choose Device > Phone.

The Find and List Phones window displays.

Step 2 Enter the search criteria to locate a specific phone and click Find.

A list of phones that match the search criteria displays.

Step 3 Choose the device name that contains the directory number that you want to delete.

The Phone Configuration window displays.

Step 4 From the Directory Numbers list, choose the line that you want to delete.

The Directory Number configuration window displays.

Step 5 Click Delete.

A message displays to verify that you want to delete the line.

Step 6 Click OK.

The Phone Configuration window displays with the line deleted.

Step 7 To reset or restart the phone and apply the new settings, click Reset Phone.

Restarting the phone reregisters the phones with Cisco CallManager without shutting the phone down. Resetting the phone shuts down the phone and brings it back up (performs a complete shutdown and reinitialization of the phones).


Related Topics

Cisco IP Phone Configuration

Finding a Phone

Adding a Directory Number

Updating a Directory Number

Resetting a Phone

Cisco IP Phones, Cisco CallManager System Guide

Phone Configuration Checklist, Cisco CallManager System Guide

Directory Number Configuration Settings

Table 47-3 describes the fields that are available in the Directory Number Configuration window.

Table 47-3 Directory Number Configuration Settings 

Field
Description

Directory Number

Directory Number

Enter a dialable phone number. Values can include numeric characters and route pattern wildcards and special characters except for (.) and (@). The directory number that you enter can appear in more than one partition.

Shared Line next to the directory number means that the directory number appears on more than one device in the same partition. Refer to "Directory Numbers" in the Cisco CallManager System Guide for more information.

Partition

Choose the partition to which the directory number belongs. Make sure that the directory number that you enter in the Directory Number field is unique within the partition that you choose. If you do not want to restrict access to the directory number, choose <None> for the partition.

If more than 250 partitions exist, the ellipsis (...) button displays next to the drop-down list box. Click the ... button to display the Select Partition window. Enter a partial partition name in the List items where Name contains field. Click the desired partition name in the list of partitions that displays in the Select item to use box, and click OK.

Directory Number Settings

Voice Mail Profile

Choose from list of Voice Mail Profiles that are defined in the Voice Mail Profile Configuration.

The first option specifies <None>, which is the current default Voice Mail Profile that is configured in the Voice Mail Profile Configuration.

Calling Search Space

Choose the appropriate calling search space. A calling search space comprises a collection of partitions that are searched for numbers that are called from this directory number. The value that you choose applies to all devices that are using this directory number.

Note Changes result in an update of the numbers that are listed in the Call Pickup Group field.

You can configure calling search space for Forward All, Forward Busy, Forward No Answer, and Forward on Failure directory numbers. The value that you choose applies to all devices that are using this directory number.

If you set the Forward All Calling Search Space field to <none>, Cisco CallManager uses the calling search spaces of the line and the phone when the user forwards calls by using the Cisco IP Phone User Options windows or the CFwdAll softkey on the phone. If you want to restrict users from forwarding calls on their phones, you must choose a restrictive calling search space from the Forward All Calling Search Space field; for example:

You have two calling search spaces: Building and PSTN. The Building calling search space only allows users to call within the building, while the PSTN calling search space allows users to call within and outside the building. You assign the phone to the PSTN calling search space and the line on your phone to the Building calling search space. If you set the Call Forward All calling search space to <none>, the Cisco CallManager can forward calls to any number within the PSTN or building calling search spaces. To prevent the user from forwarding calls to numbers outside the building, set the Call Forward All calling search space to Building.

AAR Group

Choose the automated alternate routing (AAR) group for this device. The AAR group provides the prefix digits that are used to route calls that are otherwise blocked due to insufficient bandwidth. An AAR group setting of None specifies that no rerouting of blocked calls will be attempted.

User Hold Audio Source

Choose the audio source that plays when a user initiates a hold action.

Network Hold Audio Source

Choose the audio source that plays when the network initiates a hold action.

Call Waiting

Choose the appropriate call-waiting settings. This field determines whether this directory number uses call waiting when a line is busy (On), responds with a busy signal (Off), or uses the system-wide default setting (Default).

The value that you choose applies to all devices that are using this directory number.

Auto Answer

Choose one of the following options to activate the Auto Answer feature for this directory number:

Auto Answer Off <Default>

Auto Answer with headset

Auto Answer with speakerphone (Intercom)

Note Make sure that the headset or speakerphone is not disabled when you choose Auto Answer with headset or Auto Answer with speakerphone.

Call Forward and Pickup Settings

Forward All

Voice Mail—Check this check box to use settings in the Voice Mail Profile Configuration window.

Note When this check box is checked, you cannot enter a directory number in the Destination box or choose a Calling Search Space.

Destination—This setting indicates the directory number to which all calls are forwarded.

Use any dialable phone number, including an outside destination.

Calling Search Space—This setting applies to all devices that are using this directory number.

Forward Busy

Voice Mail—Check this check box to use settings in the Voice Mail Profile Configuration window.

Note When this check box is checked, you cannot enter a directory number in the Destination box or choose a Calling Search Space.

Destination—Use any dialable phone number, including an outside destination.

Calling Search Space—This setting applies to all devices that are using this directory number.

Forward No Answer

Voice Mail—Check this check box to use settings in the Voice Mail Profile Configuration window.

Note When this box is checked, you cannot enter a directory number in the Destination box or choose a Calling Search Space.

Destination—This setting indicates the directory number to which a call is forwarded when the call is not answered.

Use any dialable phone number, including an outside destination.

Calling Search Space—This setting applies to all devices that are using this directory number.

Call Pickup Group

Choose the number that can be dialed to answer calls to this directory number (in the specified partition).

Line Settings for This Device

Display (Internal Caller ID)

Leave this field blank to have the system display the extension.

Use a maximum of 30 alphanumeric characters. Typically, use the user name or the directory number.

Setting applies only to the current device unless you check the check box at right and click the Propagate selected button. (The check box at right displays only if other devices share this directory number.)

Line Text Label

Use this field only if you do not want the directory number to show on the line appearance. Enter text that identifies this directory number for a line/phone combination.

Suggested entries include boss's name, department's name, or other appropriate information to identify multiple directory numbers to secretary/assistant who monitors multiple directory numbers.

Setting applies only to the current device unless you check the check box at right and click the Propagate selected button. (The check box at right displays only if other devices share this directory number.)

External Phone Number Mask

Indicate phone number (or mask) that is used to send Caller ID information when a call is placed from this line.

You can enter a maximum of 30 number and "X" characters. The Xs represent the directory number and must appear at the end of the pattern. For example, if you specify a mask of 972813XXXX, an external call from extension 1234 displays a caller ID number of 9728131234.

Setting applies only to the current device unless you check the check box at right and click the Propagate selected button. (The check box at right displays only if other devices share this directory number.)

Message Waiting Lamp Policy

Use this field to configure the handset lamp illumination policy. Choose one of the following options:

Use System Policy (The directory number refers to the service parameter "Message Waiting Lamp Policy" setting.)

Always Light

Never Light

Setting applies only to the current device unless you check the check box at right and click the Propagate selected button. (The check box at right displays only if other devices share this directory number.)

Ring Setting When Idle

Use this field to configure the ring setting for the line appearance when an incoming call is received and no other active calls exist on that device. Choose one of the following options:

Use system default

Disable

Flash only

Ring once

Ring

Ring Setting When Active

From the drop-down list box, choose the ring setting that is used when this phone has another active call on a different line. Choose one of the following options:

Use system default

Disable

Flash only

Ring once

Ring

Character Set

Choose the language in which you want the phone information to display.


Related Topics

Cisco IP Phone Configuration

Gateway Configuration

Resetting a Phone

Adding a Directory Number

Updating a Directory Number

Cisco IP Phones, Cisco CallManager System Guide

Phone Features, Cisco CallManager System Guide

Phone Configuration Checklist, Cisco CallManager System Guide