Cisco CallManager Administration Guide, Release 3.3(2)
CTI Route Point Configuration
Downloads: This chapterpdf (PDF - 266.0KB) The complete bookPDF (PDF - 4.79MB) | Feedback

CTI Route Point Configuration

Table Of Contents

CTI Route Point Configuration

Adding a CTI Route Point

Modifying a CTI Route Point

Deleting a CTI Route Point

Finding CTI Route Points

Resetting a CTI Route Point

CTI Route Point Configuration Settings


CTI Route Point Configuration


A computer telephony integration (CTI) route point designates a virtual device that can receive multiple, simultaneous calls for application-controlled redirection.

For first-party call control, you must add a CTI port for each active voice line. Applications that use CTI route points and CTI ports include Cisco SoftPhone, Cisco IP Auto Attendant, and Cisco IP Interactive Voice Response System. After you add a CTI route point to Cisco CallManager Administration, information from the RIS Data Collector service displays in the CTI Route Point Configuration window. When available, the IP address of the device and the name of the Cisco CallManager with which the device registered display.

For detailed instructions on how to configure CTI route points and CTI ports that are associated with these applications, refer to the documentation and online help that is included with these applications.

This section describes the following basic procedures:

Adding a CTI Route Point

Modifying a CTI Route Point

Deleting a CTI Route Point

Finding CTI Route Points

Resetting a CTI Route Point

CTI Route Point Configuration Settings

Computer Telephony Integration, Cisco CallManager System Guide

Adding a CTI Route Point

To add a CTI route point, perform the following procedure.

Procedure


Step 1 Choose Device > CTI Route Point.

Step 2 Click the Add a New CTI Route Point link.

Step 3 Enter the appropriate settings, as defined in Table 43-1.

Step 4 To add the new CTI route point, click Insert.

When prompted to add a directory number for line 1, click either OK to add the directory number or Cancel to continue without adding a directory number. For instructions on how to add and configure directory numbers, see the "Adding a Directory Number" section on page 47-29.

After you add a CTI route point to Cisco CallManager Administration, information from the RIS Data Collector service displays in the CTI Route Point Configuration window. When available, the IP address of the device and the name of the Cisco CallManager with which the device registered display as illustrated in Figure 43-1.

Figure 43-1 CTI Route Point Configuration Window


Related Topics

CTI Route Point Configuration

Modifying a CTI Route Point

Deleting a CTI Route Point

Finding CTI Route Points

Resetting a CTI Route Point

CTI Route Point Configuration Settings

Computer Telephony Integration, Cisco CallManager System Guide

Modifying a CTI Route Point

To modify a CTI route point, perform the following steps.

Procedure


Step 1 Choose Device > CTI Route Point.

The Find/List CTI Route Points window displays.

Step 2 Enter the search criteria that are needed to locate the CTI route point that you want to modify.

Step 3 Click Find.

The window updates to display a list of CTI route points that match the specified search criteria.

Step 4 Choose the name of the CTI route point whose settings you want to modify.

The window refreshes to show the current settings for the chosen CTI route point.

Step 5 Update the appropriate settings as described in Table 43-1.

Step 6 To apply the changes, click Update.

The window refreshes to display the new settings.


Related Topics

CTI Route Point Configuration

Adding a CTI Route Point

Deleting a CTI Route Point

Finding CTI Route Points

Resetting a CTI Route Point

CTI Route Point Configuration Settings

Computer Telephony Integration, Cisco CallManager System Guide

Deleting a CTI Route Point

To delete a CTI route point, perform the following procedure.

Procedure


Step 1 Choose Device > CTI Route Point.

The Find/List CTI Route Points window displays.

Step 2 Specify the search criteria that are needed to locate the CTI route point that you want to delete.

Step 3 Click Find.

The window refreshes to display a list of the CTI route points that match the specified search criteria.

Step 4 Perform one of the following actions:

Check the check boxes next to the CTI route points that you want to delete and click Delete Selected.

Delete all the CTI route points in the window by checking the check box in the matching records title bar and clicking Delete Selected.

Choose the name of the CTI route point that you want to delete from the list to display its current settings and click Delete.

Step 5 To permanently delete the CTI route point, click OK.


Related Topics

CTI Route Point Configuration

Adding a CTI Route Point

Modifying a CTI Route Point

Finding CTI Route Points

Resetting a CTI Route Point

CTI Route Point Configuration Settings

Computer Telephony Integration, Cisco CallManager System Guide

Finding CTI Route Points

To find and list CTI route points, perform the following procedure.

Procedure


Step 1 Choose Device > CTI Route Point.

The Find and List Route Points window displays.

Step 2 Choose the search criteria to use. To list all items, do not enter any search text or use "Device Name is not empty" as the search criterion.

Step 3 Click Find.

The window refreshes to display a list of the CTI route points that match the specified search criteria.

Step 4 To view the next set of CTI route points, click Next.


Note You can delete or reset multiple CTI route points from the Find and List Route Points window by checking the check boxes next to the appropriate CTI route points and clicking Delete Selected to delete the CTI route points or clicking Reset Selected to reset the CTI route points. You can choose all CTI route points in the window by checking the check box in the matching records title bar.



Related Topics

CTI Route Point Configuration

Adding a CTI Route Point

Modifying a CTI Route Point

Deleting a CTI Route Point

Resetting a CTI Route Point

CTI Route Point Configuration Settings

Computer Telephony Integration, Cisco CallManager System Guide

Resetting a CTI Route Point

To reset a CTI route point, perform the following procedure.

Procedure


Step 1 Choose Device > CTI Route Point.

The Find and List CTI Route Points window displays.

Step 2 Choose the search criteria to use.

Step 3 Click Find.

The window displays a list of CTI route points that match the search criteria as illustrated in Figure 43-2.

Figure 43-2 Find and List CTI Route Points Configuration Window

Step 4 Check the check boxes next to the CTI route points that you want to reset. To choose all CTI route points in the window, check the check box in the matching records title bar.

Step 5 Click Reset.

The Reset Device dialog displays.

Step 6 Click one of the following buttons:

Restart—Restarts a device without shutting it down.

Reset—Shuts down a device and brings it back up.

Close—Closes the Reset Device dialog without performing any action.


Related Topics

CTI Route Point Configuration

Adding a CTI Route Point

Modifying a CTI Route Point

Deleting a CTI Route Point

Finding CTI Route Points

CTI Route Point Configuration Settings

Computer Telephony Integration, Cisco CallManager System Guide

CTI Route Point Configuration Settings

Table 43-1 describes the CTI route point configuration settings.

Table 43-1 CTI Route Point Configuration Settings 

Field
Description

Device Name

Enter unique identifier for this device, from 1 to 15 characters, including alphanumeric, dot, dash, or underscores.

Description

Enter a descriptive name for the CTI route point.

Device Pool

Choose the name of a Device Pool. The device pool specifies the collection of properties for this device including CallManager Group, Date/Time Group, Region, and Calling Search Space for auto-registration.

Calling Search Space

Choose a calling search space. The calling search space specifies the collection of partitions that are searched to determine how a collected (originating) number should be routed.

Location

Choose the appropriate location for this route point. The location specifies the total bandwidth that is available for calls to and from this location. A location setting of None means that the locations feature does not keep track of the bandwidth that is consumed by this route point.


Related Topics

CTI Route Point Configuration

Adding a CTI Route Point

Modifying a CTI Route Point

Deleting a CTI Route Point

Finding CTI Route Points

Resetting a CTI Route Point

Computer Telephony Integration, Cisco CallManager System Guide