Guest

Products & Services

Cisco MCS 7890-C1 Business Edition 3000 Appliance

  • Viewing Options

  • PDF (131.7 KB)
  • Feedback

Cisco® Unified Communications Solutions unify voice, video, data, and mobile applications on fixed and mobile networks, enabling easy collaboration every time from any workspace.

Figure 1. Cisco MCS 7890-C1 Unified Communications Manager Business Edition 3000 Appliance

The Cisco MCS 7890-C1 Unified Communications Manager Business Edition 3000 Appliance is an easy-to-manage purpose built appliance that integrates the benefits of media processing (for voice calling and mobility) and digital circuit gateway functions on a single system (Figure 1). Consolidating these functions creates a cost-effective solution that is simple to set up, manage, and use, thereby lowering total cost of ownership (TCO) and providing a smooth migration from older, outdated telephony systems to IP communications. Designed for midmarket organizations with smaller IT staffs, the solution provides investment protection with the capacity to grow to up to 300 employees (400 endpoints) and 10 total sites (9 remote sites). The Cisco MCS 7890 comes preinstalled with the Cisco Unified Communications Manager Business Edition 3000 software, integrated dual T1/E1 public-switched-telephone-network (PSTN) interfaces, and an easy-to-use administration and provisioning interface.

Features and Benefits

The Cisco MCS 7890 appliance inherits all the core features and functions of the Cisco Unified Communications Manager Business Edition 3000 application. Some of these core capabilities are highlighted here. For more information, please refer to Cisco Unified Communications Manager Business Edition 3000 Version 8.6 data sheet at: http://www.cisco.com/en/US/products/ps11370/index.html.

Supported Cisco Applications

• Cisco Unified Communications Manager Business Edition 3000

System Capacity and Features

Table 1 lists the system attributes and capacities supported by the Cisco MCS 7890 appliance.

Table 1.

Attribute

Capacity

Processor

D510 Dual Core 1.66-GHz (667-MHz FSB, 1024-KB Layer 2 cache)

Memory included

4.0 GB (667 or 800 MHZ, PC2-6400, NON-ECC, CL6, DDR2 SDRAM; KINGSTON KVR800D2N6/2G)

Maximum memory

4 GB

Hard disk capacity

One 160-GB disk

Hard disk interface type

Serial Attached Technology Attachment (SATA)

Hard disk spindle speed

7200 rpm

Hard disk seek time

13 ms

Hard disk latency

4.2 ms

Data-transfer rate

3.0 Gbps maximum

Hard disk form size

2.5 in. (6.35 cm)

Network interface card

One 10/100/1000

Digital-signal-processor (DSP) module

1 Texas Instruments TNET2685

Maximum number of users and devices

300 users (400 endpoints or devices)

Total number of sites supported

10

Number of remote sites

9 (centralized call processing)

Maximum number of digital trunks

2 integrated E1/T1 ports on system

Telephony protocols or standards

T-1/E-1 PRI, T1 CAS, E1 CAS(R2)

Mounting mechanism

Wall- and rack-mounted unit

Music-on-hold (MoH) port

Supported (external audio source)

Preload

Yes

OS included

Red Hat 5.5

Basic input/output system (BIOS) type

Flash

Simple swap bays

1 hard disk drive (HDD) in a non-open bay module

Redundant Array of Independent Disks (RAID) controller model

None

Serial ports

1 rear

Parallel ports

0

USB 2.0 ports

2 rear

Video Graphics Array (VGA) ports

1 rear

Dimensions (H x W x D)

2.77 x 14.15 x 10.87 in. (70.4 x 359.4 x 276.15 mm)

Weight (maximum)

7.72 lb (3.5 kg)

Input requirements*

Rated line voltage: 100-127 VAC; 50 or 60 Hz

 

Input current: 0.56A

 

Leakage current: 0.25 mA

 

Power: 54W

 

VA rating (VA): 56

 

BTU rating (BTU/hr): 184

 

Rated line voltage: 200-240 VAC; 50 or 60 Hz

 

Input current: 0.29A

 

Leakage current: 0.55 mA

 

Power: 56W

 

VA rating (VA): 59

 

BTU rating (BTU/hr): 191

Power-supply output power

Rated steady-state power

Temperature range

Operating: 32 to 104°F (0 to 40°C)

 

Non operating: -13 to 158ºF (-25 to 70ºC)

   

Relative humidity (RH; noncondensing)

Shipment: 5 to ~95%

   

Acoustic noise

44 dBA (maximum) for temperatures <90°F (32.2°C), 55 dBA (maximum) at maximum fan speed

Airflow (cubic feet per minute [cfm])

26.4 cfm (by thermal simulation result)

Fan speed/duty cycle

3835 rpm/25%

4687 rpm/50%

6026 rpm/75%

7031 rpm/100%

User and Administrator Features

For more details about user and administrator features, please refer to the Cisco Unified Communications Manager Business Edition 3000 Version 8.6 data sheet: http://www.cisco.com/en/US/products/ps11370/index.html.
For more information about Cisco's complete solution offering for small and medium-sized businesses, please visit: http://www.cisco.com/go/smb.

Table 2. Equipment Approvals and Safety

Equipment Approvals and Safety

• FCC - Verified to comply with Part 15 of the FCC Rules, Class A
• ICES-003 Class A
• AS/NZS CISPR22 Class A
• CISPR22 Class A
• CISPR24 Class A
• EN55022 Class A
• EN55024
• IEC 61000-3-2
• IEC 61000-3-3
• KN22 Class A
• CNS13438 Class A
• GB9254 Class A
• GB4943
• VCCI-03 Class A
• CAN/CSA C22.2 No. 60950-1-07
• UL 60950-1 2 nd Edition
• IEC/EN 60950-1 2 nd Edition
• CE Mark (Low Voltage Directive 2006/95/EC, EMC Directive 2004/108/EC
• KN24

Ordering Information

Please refer to the Cisco Unified Business Edition 3000 ordering guide for Cisco MCS 7890-C1 ordering information.

Warranty Information

Cisco offers a 1-year limited hardware warranty on Cisco media convergence servers. For terms and conditions of this warranty, refer to http://www.cisco.com/en/US/docs/general/warranty/English/1Y1DEN__.html.

Cisco Unified Communications Services

Cisco Unified Communications Services allows you to accelerate cost savings and productivity gains associated with deploying a secure, resilient Cisco Unified Communications Solution. Delivered by Cisco and our certified partners, our portfolio of services is based on proven methodologies for unifying voice, video, data, and mobile applications on proven methodologies for unifying voice, video, data, and mobile applications on fixed and mobile networks. Our unique lifecycle approach to services can enhance your technology experience to accelerate true business advantage.