简介
本文档介绍如何将智能许可配置恢复为传统许可。
从智能许可证恢复到传统许可证没有直接步骤。本文包含恢复许可证类型配置的解决方法。
条件
运行12.0或更高版本的ESA，并启用智能许可(SL)。如果要重新更改为传统/传统许可(CL)，请按照解决方法部分中提及的步骤操作。
解决方法
警告：
1.将配置重置回所有初始/默认值。
2.这会影响生产，建议在执行此操作之前保存配置文件的副本（使用加密密码）。
这是恢复更改的命令
(Machine cisco.com)> resetconfig
Are you sure you want to reset all configuration values? [N]> y
Machine cisco.com removed from the cluster.
All settings have been restored to the factory defaults.
注意：resetconfig命令仅在脱机状态下工作。
您必须暂停侦听程序（如此处所述）才能执行resetconfig命令。
(Machine cisco.com)> suspend
Enter the number of seconds to wait before abruptly closing connections.
[30]>
Waiting for listeners to exit...
Receiving suspended for Test.
Waiting for outgoing deliveries to finish...
Mail delivery suspended.
(Machine cisco.com)>
或者
(Machine esa.cisco.com)> diagnostic
Choose the operation you want to perform:
- RAID - Disk Verify Utility.
- DISK_USAGE - Check Disk Usage.
- NETWORK - Network Utilities.
- REPORTING - Reporting Utilities.
- TRACKING - Tracking Utilities.
- RELOAD - Reset configuration to the initial manufacturer values.
- SERVICES - Service Utilities.
[]> reload
This command will remove all user settings and reset the entire device.
If this is a Virtual Appliance, all feature keys will be removed,
and the license must be reapplied.
Are you sure you want to continue? [N]> y
Are you *really* sure you want to continue? [N]> y
Do you want to wipe also? [N]>
Reverting to "virtualimage" preconfigure install mode.
Connection to x.x.x.x closed by remote host.
注意：请在TAC工程师的指导下执行上述更改。如果您遇到任何问题，可以立即联系TAC。
相关信息
反馈