IPv6 向けコラボレーション導入モデルの概要
この章では、シスコ コラボレーション ネットワークの IPv6 で使用できる導入モデルについて説明します。Cisco Unified Communications Manager(Unified CM)12.0 では、次に示す従来の IPv4 導入モデル例をサポートしています。
-
単一サイト配置
-
分散型呼処理を使用するマルチサイト WAN 展開
-
集中呼処理と Cisco Unified Survivable Remote Site Telephony(Unified SRST)を使用するマルチサイト展開
これらの導入モデルのすべてで、シグナリングとメディア用に IPv6 を指定して IPv6 エンドポイントを設定する必要があります。この設定により、IPv4 と IPv6 の変換にメディア ターミネーション ポイント(MTP)を使用する IPv6 トラフィックの量が最大化されます。