次のコマンドを使用して、環境ステータスレポートを取得および表示できます。
-
debug environment
-
debug platform software cman env monitor polling
-
debug ilpower
-
debug power [inline | main]
-
show diag all eeprom
-
show diag slot R0 eeprom detail
-
show environment
-
show environment all
-
show inventory
-
show platform all
-
show platform diag
-
show platform software status control-processor
-
show version
-
show power
-
show power inline
これらのコマンドは、温度や電圧などのパラメータの現在値を表示します。
環境モニタリング システムにより、これらのパラメータの値が 60 秒ごとに更新されます。これらのコマンドの簡単な例を次に示します。
debug environment：例
Router# debug environment location P0
Environmental sensor Temp: Temp 1 P0 debugging is on
Environmental sensor Temp: Temp 2 P0 debugging is on
Environmental sensor Temp: Temp 3 P0 debugging is on
Environmental sensor V: PEM Out P0 debugging is on
Environmental sensor I: PEM In P0 debugging is on
Environmental sensor I: PEM Out P0 debugging is on
Environmental sensor W: In pwr P0 debugging is on
Environmental sensor W: Out pwr P0 debugging is on
Environmental sensor RPM: fan0 P0 debugging is on
*Jul 8 21:49:23.292 PDT: Sensor: Temp: Temp 1 P0, In queue 1
*Jul 8 21:49:23.292 PDT: State=Normal Reading=35
*Jul 8 21:49:23.292 PDT: Rotation count=0 Poll period=20000
*Jul 8 21:49:23.292 PDT: Sensor: Temp: Temp 1 P0 State=Normal Reading=35
*Jul 8 21:49:23.292 PDT: Inserting into queue 1 on spoke 189.
*Jul 8 21:49:23.292 PDT: Rotation count=20 Displacement=0
*Jul 8 21:49:23.292 PDT: Sensor: Temp: Temp 2 P0, In queue 1
*Jul 8 21:49:23.292 PDT: State=Normal Reading=40
*Jul 8 21:49:23.292 PDT: Rotation count=0 Poll period=20000
*Jul 8 21:49:23.292 PDT: Sensor: Temp: Temp 2 P0 State=Normal Reading=40
*Jul 8 21:49:23.292 PDT: Inserting into queue 1 on spoke 189.
*Jul 8 21:49:23.292 PDT: Rotation count=20 Displacement=0
*Jul 8 21:49:23.292 PDT: Sensor: Temp: Temp 3 P0, In queue 1
*Jul 8 21:49:23.292 PDT: State=Normal Reading=44
*Jul 8 21:49:23.292 PDT: Rotation count=0 Poll period=20000
*Jul 8 21:49:23.292 PDT: Sensor: Temp: Temp 3 P0 State=Normal Reading=44
*Jul 8 21:49:23.292 PDT: Inserting into queue 1 on spoke 189.
*Jul 8 21:49:23.292 PDT: Rotation count=20 Displacement=0
*Jul 8 21:49:23.292 PDT: Sensor: V: PEM In P0, In queue 1
*Jul 8 21:49:23.292 PDT: State=Normal Reading=118501
*Jul 8 21:49:23.292 PDT: Rotation count=0 Poll period=20000
*Jul 8 21:49:23.293 PDT: Sensor: V: PEM In P0 State=Normal Reading=118501
*Jul 8 21:49:23.293 PDT: Inserting into queue 1 on spoke 189.
*Jul 8 21:49:23.293 PDT: Rotation count=20 Displacement=0
*Jul 8 21:49:23.293 PDT: Sensor: V: PEM Out P0, In queue 1
*Jul 8 21:49:23.293 PDT: State=Normal Reading=12000
*Jul 8 21:49:23.293 PDT: Rotation count=0 Poll period=20000
*Jul 8 21:49:23.293 PDT: Sensor: V: PEM Out P0 State=Normal Reading=12000
*Jul 8 21:49:23.293 PDT: Inserting into queue 1 on spoke 189.
*Jul 8 21:49:23.293 PDT: Rotation count=20 Displacement=0
*Jul 8 21:49:23.293 PDT: Sensor: I: PEM In P0, In queue 1
*Jul 8 21:49:23.293 PDT: State=Normal Reading=820
*Jul 8 21:49:23.293 PDT: Rotation count=0 Poll period=20000
*Jul 8 21:49:23.293 PDT: Sensor: I: PEM In P0 State=Normal Reading=828
*Jul 8 21:49:23.293 PDT: Inserting into queue 1 on spoke 189.
*Jul 8 21:49:23.293 PDT: Rotation count=20 Displacement=0
*Jul 8 21:49:23.293 PDT: Sensor: I: PEM Out P0, In queue 1
*Jul 8 21:49:23.293 PDT: State=Normal Reading=7200
*Jul 8 21:49:23.293 PDT: Rotation count=0 Poll period=20000
*Jul 8 21:49:23.293 PDT: Sensor: I: PEM Out P0 State=Normal Reading=7100
*Jul 8 21:49:23.293 PDT: Inserting into queue 1 on spoke 189.
*Jul 8 21:49:23.293 PDT: Rotation count=20 Displacement=0
*Jul 8 21:49:23.293 PDT: Sensor: P: In pwr P0, In queue 1
*Jul 8 21:49:23.293 PDT: State=Normal Reading=97
*Jul 8 21:49:23.293 PDT: Rotation count=0 Poll period=20000
*Jul 8 21:49:23.293 PDT: Sensor: P: In pwr P0 State=Normal Reading=98
*Jul 8 21:49:23.293 PDT: Inserting into queue 1 on spoke 189.
*Jul 8 21:49:23.293 PDT: Rotation count=20 Displacement=0
*Jul 8 21:49:23.293 PDT: Sensor: P: Out pwr P0, In queue 1
*Jul 8 21:49:23.293 PDT: State=Normal Reading=87
*Jul 8 21:49:23.293 PDT: Rotation count=0 Poll period=20000
*Jul 8 21:49:23.293 PDT: Sensor: P: Out pwr P0 State=Normal Reading=89
*Jul 8 21:49:23.293 PDT: Inserting into queue 1 on spoke 189.
*Jul 8 21:49:23.293 PDT: Rotation count=20 Displacement=0
*Jul 8 21:49:23.293 PDT: Sensor: RPM: fan0 P0, In queue 1
*Jul 8 21:49:23.293 PDT: State=Normal Reading=5824
*Jul 8 21:49:23.293 PDT: Rotation count=0 Poll period=20000
*Jul 8 21:49:23.293 PDT: Sensor: RPM: fan0 P0 State=Normal Reading=5824
*Jul 8 21:49:23.293 PDT: Inserting into queue 1 on spoke 189.
*Jul 8 21:49:23.293 PDT: Rotation count=20 Displacement=0
*Jul 8 21:49:43.296 PDT: Sensor: Temp: Temp 1 P0, In queue 1
*Jul 8 21:49:43.296 PDT: State=Normal Reading=35
*Jul 8 21:49:43.296 PDT: Rotation count=0 Poll period=20000
*Jul 8 21:49:43.296 PDT: Sensor: Temp: Temp 1 P0 State=Normal Reading=35
*Jul 8 21:49:43.296 PDT: Inserting into queue 1 on spoke 209.
*Jul 8 21:49:43.296 PDT: Rotation count=20 Displacement=0
*Jul 8 21:49:43.296 PDT: Sensor: Temp: Temp 2 P0, In queue 1
*Jul 8 21:49:43.296 PDT: State=Normal Reading=40
*Jul 8 21:49:43.296 PDT: Rotation count=0 Poll period=20000
*Jul 8 21:49:43.296 PDT: Sensor: Temp: Temp 2 P0 State=Normal Reading=40
*Jul 8 21:49:43.296 PDT: Inserting into queue 1 on spoke 209.
*Jul 8 21:49:43.296 PDT: Rotation count=20 Displacement=0
*Jul 8 21:49:43.296 PDT: Sensor: Temp: Temp 3 P0, In queue 1
*Jul 8 21:49:43.296 PDT: State=Normal Reading=44
*Jul 8 21:49:43.296 PDT: Rotation count=0 Poll period=20000
*Jul 8 21:53:43.329 PDT: State=Normal Reading=5824
*Jul 8 21:53:43.329 PDT: Rotation count=0 Poll period=20000
*Jul 8 21:53:43.329 PDT: Sensor: RPM: fan0 P0 State=Normal Reading=5824
*Jul 8 21:53:43.329 PDT: Inserting into queue 1 on spoke 149.
*Jul 8 21:53:43.329 PDT: Rotation count=20 Displacement=0
debug platform software cman env monitor polling：例
Router# debug platform software cman env monitor polling
platform software cman env monitor polling debugging is on
Router#
*Jul 8 21:56:23.351 PDT: Sensor: Temp: Temp 1 P0, In queue 1
*Jul 8 21:56:23.351 PDT: State=Normal Reading=35
*Jul 8 21:56:23.351 PDT: Rotation count=0 Poll period=20000
*Jul 8 21:56:23.351 PDT: IOS-RP-ENVMON: sensor READ callback Temp: Temp 1, P0, 35
*Jul 8 21:56:23.351 PDT: Sensor: Temp: Temp 1 P0 State=Normal Reading=35
*Jul 8 21:56:23.351 PDT: Inserting into queue 1 on spoke 9.
*Jul 8 21:56:23.351 PDT: Rotation count=20 Displacement=0
*Jul 8 21:56:23.351 PDT: Sensor: Temp: Temp 2 P0, In queue 1
*Jul 8 21:56:23.351 PDT: State=Normal Reading=40
*Jul 8 21:56:23.351 PDT: Rotation count=0 Poll period=20000
*Jul 8 21:56:23.351 PDT: IOS-RP-ENVMON: sensor READ callback Temp: Temp 2, P0, 40
*Jul 8 21:56:23.351 PDT: Sensor: Temp: Temp 2 P0 State=Normal Reading=40
*Jul 8 21:56:23.351 PDT: Inserting into queue 1 on spoke 9.
*Jul 8 21:56:23.351 PDT: Rotation count=20 Displacement=0
*Jul 8 21:56:23.351 PDT: Sensor: Temp: Temp 3 P0, In queue 1
*Jul 8 21:56:23.351 PDT: State=Normal Reading=44
*Jul 8 21:56:23.351 PDT: Rotation count=0 Poll period=20000
*Jul 8 21:56:23.351 PDT: IOS-RP-ENVMON: sensor READ callback Temp: Temp 3, P0, 44
*Jul 8 21:56:23.351 PDT: Sensor: Temp: Temp 3 P0 State=Normal Reading=44
*Jul 8 21:56:23.351 PDT: Inserting into queue 1 on spoke 9.
*Jul 8 21:56:23.351 PDT: Rotation count=20 Displacement=0
*Jul 8 21:56:23.351 PDT: Sensor: V: PEM In P0, In queue 1
*Jul 8 21:56:23.351 PDT: State=Normal Reading=118501
*Jul 8 21:56:23.351 PDT: Rotation count=0 Poll period=20000
*Jul 8 21:56:23.351 PDT: IOS-RP-ENVMON: sensor READ callback V: PEM In, P0, 118501
*Jul 8 21:56:23.351 PDT: Sensor: V: PEM In P0 State=Normal Reading=118501
*Jul 8 21:56:23.351 PDT: Inserting into queue 1 on spoke 9.
*Jul 8 21:56:23.351 PDT: Rotation count=20 Displacement=0
*Jul 8 21:56:23.351 PDT: Sensor: V: PEM Out P0, In queue 1
*Jul 8 21:56:23.351 PDT: State=Normal Reading=12100
*Jul 8 21:56:23.351 PDT: Rotation count=0 Poll period=20000
*Jul 8 21:56:23.351 PDT: IOS-RP-ENVMON: sensor READ callback V: PEM Out, P0, 12000
*Jul 8 21:56:23.351 PDT: Sensor: V: PEM Out P0 State=Normal Reading=12000
*Jul 8 21:56:23.351 PDT: Inserting into queue 1 on spoke 9.
*Jul 8 21:56:23.351 PDT: Rotation count=20 Displacement=0
*Jul 8 21:56:23.351 PDT: Sensor: I: PEM In P0, In queue 1
*Jul 8 21:56:23.351 PDT: State=Normal Reading=820
*Jul 8 21:56:23.351 PDT: Rotation count=0 Poll period=20000
*Jul 8 21:56:23.351 PDT: IOS-RP-ENVMON: sensor READ callback I: PEM In, P0, 828
*Jul 8 21:56:23.351 PDT: Sensor: I: PEM In P0 State=Normal Reading=828
*Jul 8 21:56:23.351 PDT: Inserting into queue 1 on spoke 9.
*Jul 8 21:56:23.351 PDT: Rotation count=20 Displacement=0
*Jul 8 21:56:23.351 PDT: Sensor: I: PEM Out P0, In queue 1
*Jul 8 21:56:23.351 PDT: State=Normal Reading=7200
*Jul 8 21:56:23.351 PDT: Rotation count=0 Poll period=20000
*Jul 8 21:56:23.351 PDT: IOS-RP-ENVMON: sensor READ callback I: PEM Out, P0, 7100
*Jul 8 21:56:23.352 PDT: Sensor: I: PEM Out P0 State=Normal Reading=7100
*Jul 8 21:56:23.352 PDT: Inserting into queue 1 on spoke 9.
*Jul 8 21:56:23.352 PDT: Rotation count=20 Displacement=0
*Jul 8 21:56:23.352 PDT: Sensor: P: In pwr P0, In queue 1
*Jul 8 21:56:23.352 PDT: State=Normal Reading=97
*Jul 8 21:56:23.352 PDT: Rotation count=0 Poll period=20000
*Jul 8 21:56:23.352 PDT: IOS-RP-ENVMON: sensor READ callback P: In pwr, P0, 98
*Jul 8 21:56:23.352 PDT: Sensor: P: In pwr P0 State=Normal Reading=98
*Jul 8 21:56:23.352 PDT: Inserting into queue 1 on spoke 9.
*Jul 8 21:56:23.352 PDT: Rotation count=20 Displacement=0
*Jul 8 21:56:23.352 PDT: Sensor: P: Out pwr P0, In queue 1
*Jul 8 21:56:23.352 PDT: State=Normal Reading=88
*Jul 8 21:56:23.352 PDT: Rotation count=0 Poll period=20000
*Jul 8 21:56:23.352 PDT: IOS-RP-ENVMON: sensor READ callback P: Out pwr, P0, 88
*Jul 8 21:56:23.352 PDT: Sensor: P: Out pwr P0 State=Normal Reading=88
*Jul 8 21:56:23.352 PDT: Inserting into queue 1 on spoke 9.
*Jul 8 21:56:23.352 PDT: Rotation count=20 Displacement=0
*Jul 8 21:56:23.352 PDT: Sensor: RPM: fan0 P0, In queue 1
*Jul 8 21:56:23.352 PDT: State=Normal Reading=5888
*Jul 8 21:56:23.352 PDT: Rotation count=0 Poll period=20000
*Jul 8 21:56:23.352 PDT: IOS-RP-ENVMON: sensor READ callback RPM: fan0, P0, 5888
*Jul 8 21:56:23.352 PDT: Sensor: RPM: fan0 P0 State=Normal Reading=5888
*Jul 8 21:56:23.352 PDT: Inserting into queue 1 on spoke 9.
*Jul 8 21:56:23.352 PDT: Rotation count=20 Displacement=0
*Jul 8 21:56:23.352 PDT: IOS-RP-ENVMON: sensor READ callback RPM: fan0, P2, 12600
*Jul 8 21:56:23.352 PDT: IOS-RP-ENVMON: sensor READ callback RPM: fan1, P2, 12840
*Jul 8 21:56:23.352 PDT: IOS-RP-ENVMON: sensor READ callback RPM: fan2, P2, 12900
*Jul 8 21:56:23.352 PDT: IOS-RP-ENVMON: sensor READ callback P: pwr, P2, 8
*Jul 8 21:56:23.352 PDT: IOS-RP-ENVMON: sensor READ callback Temp: Inlet 1, R0, 29
*Jul 8 21:56:23.352 PDT: IOS-RP-ENVMON: sensor READ callback Temp: Inlet 2, R0, 30
*Jul 8 21:56:23.352 PDT: IOS-RP-ENVMON: sensor READ callback Temp: Outlet 1, R0, 35
*Jul 8 21:56:23.352 PDT: IOS-RP-ENVMON: sensor READ callback Temp: Outlet 2, R0, 36
*Jul 8 21:56:23.352 PDT: IOS-RP-ENVMON: sensor READ callback Temp: CP-CPU, R0, 42
*Jul 8 21:56:23.352 PDT: IOS-RP-ENVMON: sensor READ callback V: 12v, R0, 12127
*Jul 8 21:56:23.352 PDT: IOS-RP-ENVMON: sensor READ callback V: 5v, R0, 5022
*Jul 8 21:56:23.352 PDT: IOS-RP-ENVMON: sensor READ callback V: 3.3v, R0, 3308
*Jul 8 21:56:23.352 PDT: IOS-RP-ENVMON: sensor READ callback V: 3.0v, R0, 3023
*Jul 8 21:56:23.352 PDT: IOS-RP-ENVMON: sensor READ callback V: 2.5v, R0, 2490
*Jul 8 21:56:23.352 PDT: IOS-RP-ENVMON: sensor READ callback V: 1.8v, R0, 1798
*Jul 8 21:56:23.352 PDT: IOS-RP-ENVMON: sensor READ callback V: 1.2v, R0, 1203
*Jul 8 21:56:23.352 PDT: IOS-RP-ENVMON: sensor READ callback V: 1.2v_CPU, R0, 1201
*Jul 8 21:56:23.352 PDT: IOS-RP-ENVMON: sensor READ callback V: 1.05v_CPU, R0, 1052
*Jul 8 21:56:23.352 PDT: IOS-RP-ENVMON: sensor READ callback V: 1.05v, R0, 1062
*Jul 8 21:56:23.352 PDT: IOS-RP-ENVMON: sensor READ callback V: 1.0v, R0, 1002
*Jul 8 21:56:23.352 PDT: IOS-RP-ENVMON: sensor READ callback V: 0.6v, R0, 593
*Jul 8 21:56:23.352 PDT: IOS-RP-ENVMON: sensor READ callback P: pwr, R0, 86
*Jul 8 21:56:25.352 PDT: IOS-RP-ENVMON: sensor READ callback P: pwr: Pwr, 0/1, 5
*Jul 8 21:56:32.354 PDT: IOS-RP-ENVMON: sensor READ callback P: pwr: Pwr, 1/0, 27
debug ilpower：例
Router# debug ilpower ?
cdp ILPOWER CDP messages
controller ILPOWER controller
event ILPOWER event
ha ILPOWER High-Availability
port ILPOWER port management
powerman ILPOWER powerman
registries ILPOWER registries
scp ILPOWER SCP messages
upoe ILPOWER upoe
debug power [inline|main]：例
この例では、1 台の 1000 W 電源と 1 台の 450 W 電源があります。インラインパワーおよび主電源の出力を示します。
Router# debug power ?
inline ILPM inline power related
main Main power related
<cr> <cr>
Router# debug power
POWER all debug debugging is on
Router# show debugging | include POWER
POWER:
POWER main debugging is on
POWER inline debugging is on
Router#
..
*Jul 8 21:56:23.351: %ENVIRONMENTAL-6-NOTICE: V: PEM Out, Location: P1, State: Warning, Reading: 0 mV
*Jul 8 21:56:23.351: %IOSXE_PEM-6-PEMOK: The PEM in slot P1 is functioning properly
*Jul 8 21:56:23.351: %PLATFORM_POWER-6-MODEMATCH: Main power is in Boost mode
*Jul 8 21:56:23.351: Power M: Received Msg for 12V/Main, total power 1450, Run same as cfg Yes
*Jul 8 21:56:23.351: Power M: Received Msg for POE/ILPM, total power 500, Run same as cfg No
*Jul 8 21:56:23.351: Power I: Updating pool power is 500 watts
*Jul 8 21:56:23.351: Power I: Intimating modules of total power 500 watts
*Jul 8 21:56:23.351: Power M: Received Msg for 12V/Main, total power 1450, Run same as cfg Yes
*Jul 8 21:56:23.351: Power M: Received Msg for POE/ILPM, total power 500, Run same as cfg No
*Jul 8 21:56:23.351: Power I: Updating pool power is 500 watts
*Jul 8 21:56:23.351: Power I: Intimating modules of total power 500 watts
Router#
show diag all eeprom：C8375-E-G2 の例
Router# show diag all eeprom
MIDPLANE EEPROM data:
Product Identifier (PID) : C8375-E-G2
Version Identifier (VID) : V01
PCB Serial Number : FDO28310870
Top Assy. Part Number : 68-7625-01
Hardware Revision : 1.0
CLEI Code : CMM8K00ARA
Power/Fan Module P0 EEPROM data:
Product Identifier (PID) : PWR-CC1-760WAC
Version Identifier (VID) : V01
PCB Serial Number : LIT2748A9MU
CLEI Code : CMUPAKBCAA
Power/Fan Module P1 EEPROM data:
Product Identifier (PID) : PWR-CC1-400WAC
Version Identifier (VID) : V01
PCB Serial Number : LIT2650C53E
CLEI Code : CMUPAG4CAA
External PoE Module POE0 EEPROM data:
Product Identifier (PID) : PWR-CC1-760WAC
Version Identifier (VID) : V01
PCB Serial Number : LIT2748A9MU
CLEI Code : CMUPAKBCAA
External PoE Module POE1 EEPROM data is not initialized
Slot R0 EEPROM data:
Product Identifier (PID) : C8375-E-G2
Version Identifier (VID) : V01
PCB Serial Number : FDO28310870
Top Assy. Part Number : 68-7625-01
Hardware Revision : 1.0
CLEI Code : CMM8K00ARA
Slot F0 EEPROM data:
Product Identifier (PID) : C8375-E-G2
Version Identifier (VID) : V01
PCB Serial Number : FDO28310870
Top Assy. Part Number : 68-7625-01
Hardware Revision : 1.0
CLEI Code : CMM8K00ARA
Slot 0 EEPROM data:
Product Identifier (PID) : C8375-E-G2
Version Identifier (VID) : V01
PCB Serial Number : FDO28310870
Top Assy. Part Number : 68-7625-01
Hardware Revision : 1.0
CLEI Code : CMM8K00ARA
Slot 1 EEPROM data:
Product Identifier (PID) : C8375-E-G2
Version Identifier (VID) : V01
PCB Serial Number : FDO28310870
Top Assy. Part Number : 68-7625-01
Hardware Revision : 1.0
CLEI Code : CMM8K00ARA
SPA EEPROM data for subslot 0/0:
Product Identifier (PID) : 4M-2xSFP+
Version Identifier (VID) : V01
PCB Serial Number :
Top Assy. Part Number : 68-2236-01
Top Assy. Revision : A0
Hardware Revision : 2.2
CLEI Code : CNUIAHSAAA
SPA EEPROM data for subslot 0/1:
Product Identifier (PID) : C-NIM-8M
Version Identifier (VID) : V01
PCB Serial Number : FDO26500YDL
Hardware Revision : 1.0
CLEI Code : CMUIAYSCAA
SPA EEPROM data for subslot 0/2 is not available
SPA EEPROM data for subslot 0/3 is not available
SPA EEPROM data for subslot 0/4 is not available
SPA EEPROM data for subslot 0/5 is not available
SPA EEPROM data for subslot 0/6 is not available
SPA EEPROM data for subslot 1/0 is not available
SPA EEPROM data for subslot 1/1 is not available
SPA EEPROM data for subslot 1/2 is not available
SPA EEPROM data for subslot 1/3 is not available
SPA EEPROM data for subslot 1/4 is not available
SPA EEPROM data for subslot 1/5 is not available
SPA EEPROM data for subslot 1/6 is not available
show diag all eeprom：C8355-G2 の例
Router# show diag all eeprom
MIDPLANE EEPROM data: Product Identifier (PID) : C8355-G2
Version Identifier (VID) : V01
PCB Serial Number : FDO28330C27
Top Assy. Part Number : 68-7722-01
Hardware Revision : 1.0
CLEI Code : CMM8J00ARA
Power/Fan Module P0 EEPROM data is not initialized
Power/Fan Module P1 EEPROM data:
Product Identifier (PID) : PWR-CC1-230WAC
Version Identifier (VID) : V02
PCB Serial Number :
CLEI Code : IPUPAMFAAB
Slot R0 EEPROM data:
Product Identifier (PID) : C8355-G2
Version Identifier (VID) : V01
PCB Serial Number : FDO28330C27
Top Assy. Part Number : 68-7722-01
Hardware Revision : 1.0
CLEI Code : CMM8J00ARA
Slot F0 EEPROM data:
Product Identifier (PID) : C8355-G2
Version Identifier (VID) : V01
PCB Serial Number : FDO28330C27
Top Assy. Part Number : 68-7722-01
Hardware Revision : 1.0
CLEI Code : CMM8J00ARA
Slot 0 EEPROM data:
Product Identifier (PID) : C8355-G2
Version Identifier (VID) : V01
PCB Serial Number : FDO28330C27
Top Assy. Part Number : 68-7722-01
Hardware Revision : 1.0
CLEI Code : CMM8J00ARA
SPA EEPROM data for subslot 0/0:
Product Identifier (PID) : 4M-2x1G-4xSFP+
Version Identifier (VID) : V01
PCB Serial Number :
Top Assy. Part Number : 68-2236-01
Top Assy. Revision : A0
Hardware Revision : 2.2
CLEI Code : CNUIAHSAAA
SPA EEPROM data for subslot 0/1 is not available
SPA EEPROM data for subslot 0/2 is not available
SPA EEPROM data for subslot 0/3 is not available
SPA EEPROM data for subslot 0/4 is not available
SPA EEPROM data for subslot 0/5 is not available
SPA EEPROM data for subslot 0/6 is not available
show environment：C8375-E-G2 の例
この例で、スロット POE0 および POE1 の出力に注目してください。
Router# show environment
Number of Critical alarms: 0
Number of Major alarms: 0
Number of Minor alarms: 2
Slot Sensor Current State Reading Threshold(Minor,Major,Critical,Shutdown)
---------- -------------- --------------- ------------ ---------------------------------------
R0 Temp: Inlet 1 Normal 23 Celsius (40 ,na ,42 ,na )(Celsius)
R0 Temp: Inlet 2 Normal 26 Celsius (90 ,na ,100,na )(Celsius)
R0 Temp: Outlet 1 Normal 24 Celsius (70 ,na ,75 ,na )(Celsius)
R0 Temp: Outlet 2 Normal 26 Celsius (70 ,na ,75 ,na )(Celsius)
R0 Temp: CPU Normal 34 Celsius (na ,na ,na ,na )(Celsius)
R0 Temp: Working Normal 23 Celsius (na ,na ,na ,na )(Celsius)
R0 V: 12V Normal 12044 mV na
R0 V: 5V Normal 5010 mV na
R0 V: 3.3V_STBY Normal 3314 mV na
R0 V: 3.3V Normal 3315 mV na
R0 V: 3.3V_USB Normal 3315 mV na
R0 V: 2.5V Normal 2502 mV na
R0 V: 1.8V Normal 1799 mV na
R0 V: 1.2V_CPU Normal 1197 mV na
R0 V: 1.2V Normal 1208 mV na
R0 V: 1.1V Normal 1100 mV na
R0 V: 1.0V Normal 1001 mV na
R0 V: 0.8V_SW Normal 790 mV na
R0 V: 0.85V_DDR Normal 850 mV na
R0 V: 0.8V_SYS Normal 848 mV na
R0 V: 0.8V_CORE Normal 800 mV na
R0 V: 0.75V Normal 750 mV na
R0 P: Power Normal 41 Watts na
P0 Temp: Temp 1 Normal 0 Celsius (na ,na ,na ,na )(Celsius)
P0 Temp: Temp 2 Normal 0 Celsius (na ,na ,na ,na )(Celsius)
P0 Temp: Temp 3 Normal 0 Celsius (na ,na ,na ,na )(Celsius)
P0 V: PEM In Normal 0 mV na
P0 V: PEM Out Minor_Low 0 mV na
P0 I: PEM In Normal 0 mA na
P0 I: PEM Out Normal 0 mA na
P0 P: In power Normal 0 Watts na
P0 P: Out power Normal 0 Watts na
P0 RPM: fan0 Minor_Low 0 RPM na
P1 Temp: Temp 1 Normal 28 Celsius (na ,na ,na ,na )(Celsius)
P1 Temp: Temp 2 Normal 31 Celsius (na ,na ,na ,na )(Celsius)
P1 Temp: Temp 3 Normal 30 Celsius (na ,na ,na ,na )(Celsius)
P1 V: PEM In Normal 226503mV na
P1 V: PEM Out Normal 12000 mV na
P1 I: PEM In Normal 265 mA na
P1 I: PEM Out Normal 3600 mA na
P1 P: In power Normal 54 Watts na
P1 P: Out power Normal 42 Watts na
P1 RPM: fan0 Normal 6080 RPM na
P2 P: Power Normal 3 Watts na
P2 RPM: fan0 Normal 9480 RPM na
P2 RPM: fan1 Normal 9540 RPM na
P2 RPM: fan2 Normal 9360 RPM na
0/1 P: pwr: Pwr Normal 11 Watts na
show environment：C8355-G2 の例
この例で、スロット POE0 および POE1 の出力に注目してください。
Router# show environment
Number of Critical alarms: 0
Number of Major alarms: 0
Number of Minor alarms: 0
Slot Sensor Current State Reading Threshold(Minor,Major,Critical,Shutdown)
---------- -------------- --------------- ------------ ---------------------------------------
R0 Temp: Inlet 1 Normal 30 Celsius (na ,na ,na ,na )(Celsius)
R0 Temp: Inlet 2 Normal 35 Celsius (na ,na ,na ,na )(Celsius)
R0 Temp: Outlet 1 Normal 42 Celsius (na ,na ,na ,na )(Celsius)
R0 Temp: Outlet 2 Normal 40 Celsius (na ,na ,na ,na )(Celsius)
R0 Temp: CPU Normal 46 Celsius (na ,na ,95 ,na )(Celsius)
R0 Temp: Working Normal 30 Celsius (na ,na ,na ,na )(Celsius)
R0 V: 12V Normal 12242 mV na
R0 V: 5V Normal 5012 mV na
R0 V: 3.3V_STBY Normal 3299 mV na
R0 V: 3.3V Normal 3300 mV na
R0 V: 3.3V_USB Normal 3302 mV na
R0 V: 2.5V Normal 2504 mV na
R0 V: 1.8V Normal 1802 mV na
R0 V: 1.2V_CPU Normal 1202 mV na
R0 V: 1.2V Normal 1205 mV na
R0 V: 1.1V Normal 1104 mV na
R0 V: 1.0V Normal 998 mV na
R0 V: 0.8V_SW Normal 796 mV na
R0 V: 0.8V_SYS Normal 851 mV na
R0 V: 0.8V_CORE Normal 748 mV na
R0 V: 0.8V_PHY Normal 800 mV na
R0 V: 0.75V Normal 754 mV na
R0 P: Power Normal 33 Watts na
R0 P: module Normal 0 Watts na
show environment all：C8375-E-G2 の例
Router# show environment all
Sensor List: Environmental Monitoring
Sensor Location State Reading
Temp: Temp 1 P0 Normal 36 Celsius
Temp: Temp 2 P0 Normal 38 Celsius
Temp: Temp 3 P0 Normal 38 Celsius
V: PEM In P0 Normal 206502 mV
V: PEM Out P0 Normal 12000 mV
I: PEM In P0 Normal 281 mA
I: PEM Out P0 Normal 3500 mA
P: In pwr P0 Normal 53 Watts
P: Out pwr P0 Normal 43 Watts
RPM: fan0 P0 Normal 3712 RPM
RPM: fan0 P2 Normal 7260 RPM
RPM: fan1 P2 Normal 7260 RPM
RPM: fan2 P2 Normal 7200 RPM
P: pwr P2 Normal 3 Watts
Temp: Inlet 1 R0 Normal 19 Celsius
Temp: Inlet 2 R0 Normal 21 Celsius
Temp: Outlet 1 R0 Normal 25 Celsius
Temp: Outlet 2 R0 Normal 23 Celsius
Temp: CP-CPU R0 Normal 29 Celsius
V: 12v R0 Normal 11984 mV
V: 5v R0 Normal 5018 mV
V: 3.3v R0 Normal 3311 mV
V: 3.0v R0 Normal 2992 mV
V: 2.5v R0 Normal 2488 mV
V: 1.8v R0 Normal 1785 mV
V: 1.2v R0 Normal 1201 mV
V: 1.2v_CPU R0 Normal 1200 mV
V: 1.05v_CPU R0 Normal 1051 mV
V: 1.05v R0 Normal 1058 mV
V: 1.0v R0 Normal 1001 mV
V: 0.6v R0 Normal 595 mV
P: pwr R0 Normal 45 Watts
show environment all：C8355-G2 の例
Router# show environment all
Sensor List: Environmental Monitoring
Sensor Location State Reading
Temp: Inlet 1 R0 Normal 30 Celsius
Temp: Inlet 2 R0 Normal 35 Celsius
Temp: Outlet 1 R0 Normal 41 Celsius
Temp: Outlet 2 R0 Normal 40 Celsius
Temp: CPU R0 Normal 45 Celsius
Temp: Working R0 Normal 30 Celsius
V: 12V R0 Normal 12250 mV
V: 5V R0 Normal 5016 mV
V: 3.3V_STBY R0 Normal 3297 mV
V: 3.3V R0 Normal 3302 mV
V: 3.3V_USB R0 Normal 3306 mV
V: 2.5V R0 Normal 2505 mV
V: 1.8V R0 Normal 1802 mV
V: 1.2V_CPU R0 Normal 1201 mV
V: 1.2V R0 Normal 1206 mV
V: 1.1V R0 Normal 1104 mV
V: 1.0V R0 Normal 999 mV
V: 0.8V_SW R0 Normal 797 mV
V: 0.8V_SYS R0 Normal 850 mV
V: 0.8V_CORE R0 Normal 748 mV
V: 0.8V_PHY R0 Normal 800 mV
V: 0.75V R0 Normal 752 mV
P: Power R0 Normal 33 Watts
P: module R0 Normal 0 Watts
show inventory：C8375-E-G2 の例
Router# show inventory
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
INFO: Please use "show license UDI" to get serial number for licensing.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
NAME: "Chassis", DESCR: "Cisco C8375-E-G2 Chassis"
PID: C8375-E-G2 , VID: V01 , SN: FDO2833M01A
NAME: "Power Supply Module 0", DESCR: "760W AC Power Supply for Cisco C8375"
PID: PWR-CC1-760WAC , VID: V01 , SN: LIT2748A9MU
NAME: "Power Supply Module 1", DESCR: "400W AC power supply for Cisco C8300 1RU"
PID: PWR-CC1-400WAC , VID: V01 , SN: LIT2650C53E
NAME: "Fan Tray", DESCR: "Cisco C8300 1RU Fan Assembly"
PID: C8300-FAN-1R , VID: V02 , SN: LIT2214364L
NAME: "POE Module 0", DESCR: "760W AC Power Supply for Cisco C8375"
PID: PWR-CC1-760WAC , VID: V01 , SN: LIT2748A9MU
NAME: "module 0", DESCR: "Cisco C8375-E-G2 Built-In NIM controller"
PID: C8375-E-G2 , VID: , SN:
NAME: "NIM subslot 0/1", DESCR: "C-NIM-8M"
PID: C-NIM-8M , VID: V01 , SN: FDO26500YDL
NAME: "NIM subslot 0/0", DESCR: "4M-2xSFP+"
PID: 4M-2xSFP+ , VID: V01 , SN:
NAME: "subslot 0/0 transceiver 4", DESCR: "10G AOC5M"
PID: SFP-10G-AOC5M , VID: V01 , SN: DPZ2618A261-B
NAME: "subslot 0/0 transceiver 5", DESCR: "10G AOC5M"
PID: SFP-10G-AOC5M , VID: V01 , SN: DPZ2618A261-A
NAME: "module 1", DESCR: "Cisco C8375-E-G2 Built-In SM controller"
PID: C8375-E-G2 , VID: , SN:
NAME: "module R0", DESCR: "Cisco C8375-E-G2 Route Processor"
PID: C8375-E-G2 , VID: V01 , SN: FDO28310870
NAME: "module F0", DESCR: "Cisco C8375-E-G2 Forwarding Processor"
PID: C8375-E-G2 , VID: , SN:
show inventory：C8355-G2 の例
Router# show inventory
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
INFO: Please use "show license UDI" to get serial number for licensing. +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
NAME: "Chassis", DESCR: "Cisco C8355-G2 Chassis"
PID: C8355-G2 , VID: V01 , SN: FDO2836M06D
NAME: "Power Supply Module 1", DESCR: "230W AC PS w/ POE Module for Cisco C823X/C835X"
PID: PWR-CC1-230WAC , VID: V02 , SN:
NAME: "POE Module 1", DESCR: "230W AC PS w/ POE Module for Cisco C823X/C835X"
PID: PWR-CC1-230WAC , VID: V02 , SN:
NAME: "module 0", DESCR: "Cisco C8355-G2 Built-In SM controller"
PID: C8355-G2 , VID: , SN:
NAME: "NIM subslot 0/0", DESCR: "4M-2x1G-4xSFP+"
PID: 4M-2x1G-4xSFP+ , VID: V01 , SN:
NAME: "subslot 0/0 transceiver 8", DESCR: "SFP+ 10GBASE-SR"
PID: SFP-10G-SR-S , VID: V01 , SN: OPM26181F0B
NAME: "subslot 0/0 transceiver 9", DESCR: "SFP+ 10GBASE-SR"
PID: SFP-10G-SR-S , VID: V01 , SN: OPM26200JQA
NAME: "module R0", DESCR: "Cisco C8355-G2 Route Processor"
PID: C8355-G2 , VID: V01 , SN: FDO28330C27
NAME: "harddisk", DESCR: "M.2 USB"
PID: eMMC HS-SD/MMC , VID: , SN:
NAME: "module F0", DESCR: "Cisco C8355-G2 Forwarding Processor"
PID: C8355-G2 , VID: , SN:
show platform：C8375-E-G2 の例
Router# show platform
Chassis type: C8375-E-G2
Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
0 C8375-E-G2 ok 3d17h
0/0 4M-2xSFP+ ok 3d17h
0/1 C-NIM-8M ok 3d17h
1 C8375-E-G2 ok 3d17h
R0 C8375-E-G2 ok, active 3d17h
F0 C8375-E-G2 ok, active 3d17h
P0 PWR-CC1-760WAC fail, badinput 3d17h
P1 PWR-CC1-400WAC ok 3d17h
P2 C8300-FAN-1R ok 3d17h
POE0 PWR-CC1-760WAC fail, badinput 3d17h
Slot CPLD Version Firmware Version
--------- ------------------- ---------------------------------------
0 25033132 v17.15(1.17r).s2.cp
1 25033132 v17.15(1.17r).s2.cp
R0 25033132 v17.15(1.17r).s2.cp
F0 25033132 v17.15(1.17r).s2.cp
show platform：C8355-G2 の例
Router# show platform
Chassis type: C8355-G2
Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
0 C8355-G2 ok 06:21:27
0/0 4M-2x1G-4xSFP+ ok 06:20:36
R0 C8355-G2 ok, active 06:21:27
F0 C8355-G2 ok, active 06:21:27
P0 Unknown empty never
P1 PWR-CC1-230WAC ok 06:20:52
POE1 PWR-CC1-230WAC ok 06:20:52
Slot CPLD Version Firmware Version
--------- ------------------- ---------------------------------------
0 25071533 v17.15(3.3r).s2.cp
R0 25071533 v17.15(3.3r).s2.cp
F0 25071533 v17.15(3.3r).s2.cp
show platform diag：C8375-E-G2 の例
Router# show platform diag
Chassis type: C8375-E-G2
Slot: 0, C8375-E-G2
Running state : ok
Internal state : online
Internal operational state : ok
Physical insert detect time : 00:00:24 (3d17h ago)
Software declared up time : 00:01:16 (3d17h ago)
CPLD version : 25033132
Firmware version : v17.15(1.17r).s2.cp
Sub-slot: 0/0, 4M-2xSFP+
Operational status : ok
Internal state : inserted
Physical insert detect time : 00:01:24 (3d17h ago)
Logical insert detect time : 00:01:24 (3d17h ago)
Sub-slot: 0/1, C-NIM-8M
Operational status : ok
Internal state : inserted
Physical insert detect time : 00:01:26 (3d17h ago)
Logical insert detect time : 00:01:26 (3d17h ago)
Sub-slot: 0/4, VDSP-CC
Operational status : ok
Internal state : inserted
Physical insert detect time : 00:01:27 (3d17h ago)
Logical insert detect time : 00:01:27 (3d17h ago)
Slot: 1, C8375-E-G2
Running state : ok
Internal state : online
Internal operational state : ok
Physical insert detect time : 00:00:24 (3d17h ago)
Software declared up time : 00:01:17 (3d17h ago)
CPLD version : 25033132
Firmware version : v17.15(1.17r).s2.cp
Slot: R0, C8375-E-G2
Running state : ok, active
Internal state : online
Internal operational state : ok
Physical insert detect time : 00:00:24 (3d17h ago)
Software declared up time : 00:00:24 (3d17h ago)
CPLD version : 25033132
Firmware version : v17.15(1.17r).s2.cp
Slot: F0, C8375-E-G2
Running state : ok, active
Internal state : online
Internal operational state : ok
Physical insert detect time : 00:00:24 (3d17h ago)
Software declared up time : 00:01:04 (3d17h ago)
Hardware ready signal time : 00:01:02 (3d17h ago)
Packet ready signal time : 00:01:17 (3d17h ago)
CPLD version : 25033132
Firmware version : v17.15(1.17r).s2.cp
Slot: P0, PWR-CC1-760WAC
State : fail, badinput
Physical insert detect time : 00:00:02 (3d17h ago)
Slot: P1, PWR-CC1-400WAC
State : ok
Physical insert detect time : 00:00:02 (3d17h ago)
Slot: P2, C8300-FAN-1R
State : ok
Physical insert detect time : 00:00:02 (3d17h ago)
Slot: POE0, PWR-CC1-760WAC
State : fail, badinput
Physical insert detect time : 00:00:02 (3d17h ago)
Slot: POE1, Unknown
State : empty
Physical insert detect time : 00:00:00 (never ago)
show platform diag：C8355-G2 の例
Router# show platform diag
Chassis type: C8355-G2
Slot: 0, C8355-G2
Running state : ok
Internal state : online
Internal operational state : ok
Physical insert detect time : 00:00:22 (06:14:37 ago)
Software declared up time : 00:01:09 (06:13:50 ago)
CPLD version : 25071533
Firmware version : v17.15(3.3r).s2.cp
Sub-slot: 0/0, 4M-2x1G-4xSFP+
Operational status : ok
Internal state : inserted
Physical insert detect time : 00:01:13 (06:13:46 ago)
Logical insert detect time : 00:01:13 (06:13:46 ago)
Slot: R0, C8355-G2
Running state : ok, active
Internal state : online
Internal operational state : ok
Physical insert detect time : 00:00:22 (06:14:37 ago)
Software declared up time : 00:00:22 (06:14:37 ago)
CPLD version : 25071533
Firmware version : v17.15(3.3r).s2.cp
Slot: F0, C8355-G2
Running state : ok, active
Internal state : online
Internal operational state : ok
Physical insert detect time : 00:00:22 (06:14:37 ago)
Software declared up time : 00:01:04 (06:13:55 ago)
Hardware ready signal time : 00:01:02 (06:13:57 ago)
Packet ready signal time : 00:01:16 (06:13:43 ago)
CPLD version : 25071533
Firmware version : v17.15(3.3r).s2.cp
Slot: P0, Unknown
State : empty
Physical insert detect time : 00:00:00 (never ago)
Slot: P1, PWR-CC1-230WAC
State : ok
Physical insert detect time : 00:00:03 (06:14:02 ago)
Slot: POE1, PWR-CC1-230WAC
State : ok
Physical insert detect time : 00:00:03 (06:14:02 ago)
show platform software status control-processor：C8375-E-G2 の例
Router# show platform software status control-processor
RP0: online, statistics updated 10 seconds ago
Load Average: healthy
1-Min: 0.53, status: healthy, under 5.00
5-Min: 0.90, status: healthy, under 5.00
15-Min: 0.87, status: healthy, under 5.00
Memory (kb): healthy
Total: 3884836
Used: 1976928 (51%), status: healthy
Free: 1907908 (49%)
Committed: 3165956 (81%), under 90%
Per-core Statistics
CPU0: CPU Utilization (percentage of time spent)
User: 2.10, System: 2.20, Nice: 0.00, Idle: 95.69
IRQ: 0.00, SIRQ: 0.00, IOwait: 0.00
CPU1: CPU Utilization (percentage of time spent)
User: 2.80, System: 2.60, Nice: 0.00, Idle: 94.50
IRQ: 0.00, SIRQ: 0.10, IOwait: 0.00
CPU2: CPU Utilization (percentage of time spent)
User: 1.90, System: 2.10, Nice: 0.00, Idle: 96.00
IRQ: 0.00, SIRQ: 0.00, IOwait: 0.00
CPU3: CPU Utilization (percentage of time spent)
User: 10.12, System: 0.60, Nice: 0.00, Idle: 89.27
IRQ: 0.00, SIRQ: 0.00, IOwait: 0.00
show platform software status control-processor：C8355-G2 の例
Router# show platform software status control-processor
RP0: online, statistics updated 4 seconds ago
Load Average: healthy
1-Min: 11.00, status: healthy, under 18.00
5-Min: 11.03, status: healthy, under 18.00
15-Min: 11.12, status: healthy, under 18.00
Memory (kb): healthy
Total: 16134276
Used: 4006772 (25%), status: healthy
Free: 12127504 (75%)
Committed: 4515476 (28%), under 90%
Per-core Statistics
CPU0: CPU Utilization (percentage of time spent)
User: 1.89, System: 3.19, Nice: 0.00, Idle: 94.20
IRQ: 0.49, SIRQ: 0.19, IOwait: 0.00
CPU1: CPU Utilization (percentage of time spent)
User: 99.90, System: 0.00, Nice: 0.00, Idle: 0.00
IRQ: 0.10, SIRQ: 0.00, IOwait: 0.00
CPU2: CPU Utilization (percentage of time spent)
User: 99.90, System: 0.00, Nice: 0.00, Idle: 0.00
IRQ: 0.10, SIRQ: 0.00, IOwait: 0.00
CPU3: CPU Utilization (percentage of time spent)
User: 99.90, System: 0.00, Nice: 0.00, Idle: 0.00
IRQ: 0.10, SIRQ: 0.00, IOwait: 0.00
CPU4: CPU Utilization (percentage of time spent)
User: 99.90, System: 0.00, Nice: 0.00, Idle: 0.00
IRQ: 0.10, SIRQ: 0.00, IOwait: 0.00
CPU5: CPU Utilization (percentage of time spent)
User: 99.80, System: 0.00, Nice: 0.00, Idle: 0.00
IRQ: 0.09, SIRQ: 0.09, IOwait: 0.00
CPU3: CPU Utilization (percentage of time spent)
User: 99.90, System: 0.00, Nice: 0.00, Idle: 0.00
IRQ: 0.10, SIRQ: 0.00, IOwait: 0.00
CPU4: CPU Utilization (percentage of time spent)
User: 99.90, System: 0.00, Nice: 0.00, Idle: 0.00
IRQ: 0.10, SIRQ: 0.00, IOwait: 0.00
CPU5: CPU Utilization (percentage of time spent)
User: 99.80, System: 0.00, Nice: 0.00, Idle: 0.00
IRQ: 0.09, SIRQ: 0.09, IOwait: 0.00
CPU6: CPU Utilization (percentage of time spent)
User: 99.80, System: 0.00, Nice: 0.00, Idle: 0.00
IRQ: 0.09, SIRQ: 0.09, IOwait: 0.00
CPU7: CPU Utilization (percentage of time spent)
User: 99.90, System: 0.00, Nice: 0.00, Idle: 0.00
IRQ: 0.10, SIRQ: 0.00, IOwait: 0.00
CPU8: CPU Utilization (percentage of time spent)
User: 99.90, System: 0.00, Nice: 0.00, Idle: 0.00
IRQ: 0.10, SIRQ: 0.00, IOwait: 0.00
CPU9: CPU Utilization (percentage of time spent)
User: 99.90, System: 0.00, Nice: 0.00, Idle: 0.00
IRQ: 0.10, SIRQ: 0.00, IOwait: 0.00
CPU10: CPU Utilization (percentage of time spent)
User: 14.81, System: 60.06, Nice: 0.00, Idle: 21.62
IRQ: 3.50, SIRQ: 0.00, IOwait: 0.00
CPU11: CPU Utilization (percentage of time spent)
User: 99.90, System: 0.00, Nice: 0.00, Idle: 0.00
IRQ: 0.10, SIRQ: 0.00, IOwait: 0.00
show diag slot RO eeprom detail：C8375-E-G2 の例
Router# show diag slot R0 eeprom detail
Slot R0 EEPROM data: EEPROM version : 4
Compatible Type : 0xFF
FRU Specific Info : 0100
PCB Serial Number : FDO28310870
Controller Type : 4487
Hardware Revision : 1.0
PCB Part Number : 73-20702-08
Board Revision : 03
Top Assy. Part Number : 68-7625-01
Deviation Number : 0
Fab Version : 08
Product Identifier (PID) : C8375-E-G2
Version Identifier (VID) : V01
CLEI Code : CMM8K00ARA
Chassis Serial Number : FDO2833M01A
Chassis MAC Address : 481b.a465.9470
MAC Address block size : 144
Manufacturing Test Data : 00 00 00 00 00 00 00 00
Asset ID :
show diag slot RO eeprom detail：C8355-G2 の例
Router# show diag slot R0 eeprom detail
Slot R0 EEPROM data:
EEPROM version : 4
Compatible Type : 0xFF
FRU Specific Info : 0100
PCB Serial Number : FDO28330C27
Controller Type : 4486
Hardware Revision : 1.0
PCB Part Number : 73-20990-07
Board Revision : 05
Top Assy. Part Number : 68-7722-01
Deviation Number : 0
Fab Version : 07
Product Identifier (PID) : C8355-G2
Version Identifier (VID) : V01
CLEI Code : CMM8J00ARA
Chassis Serial Number : FDO2836M06D
Chassis MAC Address : 4874.104a.e9e0
MAC Address block size : 96
Manufacturing Test Data : 00 00 00 00 00 00 00 00
Asset ID :
show version：C8375-E-G2 の例
Router# show version
Cisco IOS XE Software, Version BLD_V1718_THROTTLE_LATEST_20250513_033132_V17_18_0_38
Cisco IOS Software [IOSXE], c8kg2be Software (ARMV8EL_LINUX_IOSD-UNIVERSALK9-M), Experimental Version 17.18.20250513:042531 [BLD_V1718_THROTTLE_LATEST_20250513_033132:/nobackup/mcpre/s2c-build-ws 101]
Copyright (c) 1986-2025 by Cisco Systems, Inc.
Compiled Mon 12-May-25 21:26 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2025 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: v17.15(1.19d).s2.cp.RSA2K
Crestone-1 uptime is 4 minutes
Uptime for this control processor is 5 minutes
System returned to ROM by Reload Command
System image file is "bootflash:c8kg2be-universalk9.17.18.01.0.700_V17_18_0_38.SSA.bin"
Last reload reason: Reload Command
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Technology Package License Information:
-----------------------------------------------------------------
Technology Type Technology-package Technology-package
Current Next Reboot
-----------------------------------------------------------------
Smart License Subscription advantage advantage
The current crypto throughput level is 10000 kbps (Aggregate)
Smart Licensing Status: Smart Licensing Using Policy
cisco C8375-E-G2 (1RU) processor with 3703488K/6147K bytes of memory.
Processor board ID FDO2721M02R
Router operating mode: Autonomous
1 Virtual Ethernet interface
4 Gigabit Ethernet interfaces
4 2.5 Gigabit Ethernet interfaces
8 Ten Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
8388608K bytes of physical memory.
20257791K bytes of flash memory at bootflash:.
Configuration register is 0x3922
show version：C8355-G2 の例
Router# show version
Cisco IOS XE Software, Version 17.18.01eft30
Cisco IOS Software [IOSXE], c8kg2be Software (ARMV8EL_LINUX_IOSD-UNIVERSALK9-M), Version 17.18.1eft30, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2025 by Cisco Systems, Inc.
Compiled Fri 25-Jul-25 21:47 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2025 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: v17.15(3.3r).s2.cp
Wilson1 uptime is 5 hours, 53 minutes
Uptime for this control processor is 5 hours, 54 minutes
System returned to ROM by PowerOn
System image file is "bootflash:c8kg2be-universalk9.17.18.01eft30.SPA.bin"
Last reload reason: PowerOn
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Technology Package License Information:
-----------------------------------------------------------------
Technology Type Technology-package Technology-package
Current Next Reboot
-----------------------------------------------------------------
Smart License Subscription advantage advantage
The current crypto throughput level is unthrottled
cisco C8355-G2 (1RU) processor with 7799156K/6147K bytes of memory.
Processor board ID FDO2836M06D
Router operating mode: Autonomous
2 Virtual Ethernet interfaces
2 Gigabit Ethernet interfaces
4 Ten Gigabit Ethernet interfaces
4 Five Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
16777216K bytes of physical memory.
18250751K bytes of flash memory at bootflash:.
29933568K bytes of M.2 USB at harddisk:.
Configuration register is 0x2102
フィードバック