Ultra Cloud Core 5G Access and Mobility Management Function, Release 2021.04 - Configuration and Administration Guide

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: October 29, 2021

AMF Troubleshooting

show subscriber

This section describes the show subscriber commands for the existing subscribers sessions.

Table 1. show subscriber Command Output Description
Field	Description
\|	Output modifiers.
all	Displays all the existing subscriber sessions.
supi	Displays subscriber sessions based on SUPI ID.
gnodeb-id	Displays the gnodeb-id of the session.

clear subscriber

This section describes the clear subscriber commands for the existing subscribers sessions.

Table 2. clear subscriber Command Output Description
Field	Description
\|	Output modifiers.
all	Clears all the subscriber sessions.
gnodeb-id	Clears the sessions that have the specified gnodeb-id.
supi	Clears the sessions based on the SUPI value.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)