Cisco Aironet® 1815T (Teleworker) Access Point Deployment Guide

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: August 18, 2017

Chapter: Software Features on Cisco Aironet AIR-AP1815T

Software Features on Cisco Aironet AIR-AP1815T

The Cisco Aironet® 1815T(Teleworker) Access Point supports a number of features:

Access Point Mode
- Cisco Aironet 1815t supports FlexConnect Mode with sub mode as OEAP
DTLS
- Control–DTLS is enabled for Control
- Data–DTLS is enabled for client traffic tunneled back to the corporate Wireless LAN Controller
CDP and LLDP
- Ethernet Ports– Cisco Aironet 1815t does not support CDP or LLDP on Ethernet ports. LAN1 (PSE) has fixed power (not negotiable)
Authentication and Security
- Advanced Encryption Standard (AES) for Wi-Fi Protected Access 2 (WPA2)
- 802.1X, RADIUS authentication, authorization and accounting (AAA) on WLAN and RLAN
- 802.11i
- MAC filtering
Personal SSID support
- Personal SSID support for local home networking
- LAN 3 is a dedicated local port for local AP access
WLAN and RLAN
- A total of 8 (WLAN + RLAN) is supported on Cisco Aironet 1815T. One can have more than 8 (WLAN + RLAN) associated on the AP group but only the first 8 (WLAN + RLAN) would be usable.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)