The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The CE1300 is based on a UCS C220 M6S server, with the following components:
|
Item |
Part |
Quantity |
|---|---|---|
|
Chassis |
UCSC-C220-M6S |
1 |
|
Processor |
UCS-CPU-I6334 (3.6GHz/165W 8C/18MB DDR4 3200MHz) |
1 |
|
RAM |
UCS-MR-X16G1RW 16GB RDIMM SRx4 3200 (8Gb) |
2 |
|
Hard Disk (SED) |
UCS-HD12T10NK9 1.2TB 12G SAS 10K RPM SFF HDD (SED) |
2 |
|
RAID Controller |
UCSC-RAID-220M6 Cisco 12G SAS RAID Controller w/4GB FBWC (16 Drv) w/1U Brkt |
1 |
|
NIC |
UCSC-PCIE-ID10GF Intel X710-DA2 dual-port 10G SFP+ NIC |
1 |
|
EXP-1GSFP-T (1Gb Copper SFP) |
2 |
|
|
EXP-10GSFP-SR-MP (10Gb SR 2 Fiber SFP) |
2 |
|
|
PSU |
UCSC-PSU1-1050W |
2 |
|
TPM |
UCSX-TPM-002C TPM 2.0, TCG, FIPS140-2, CC EAL4+ Certified, for M6 servers |
1 |
|
M.2 |
UCS-M2-240G 240GB SATA M.2 |
1 |
|
M.2 Raid |
UCS-M2-HWRAID Cisco Boot optimized M.2 Raid controller |
1 |
|
Miscellaneous |
UCSC-RAIL-M6 (Rack Mount Kit) |
1 |
|
UCSC-HSLP-M6 (Heat Sink) |
1 |
|
|
UCS-DIMM-BLK (DIMM Slot Blanking) |
10 |
|
|
UCSC-BBLKD-S2 (Blanking Panels for HDD Slots) |
8 |
This chapter explains the following:
Power cables are available to order from Cisco.
 Warning |
If you opt not to order power cables from Cisco, you must use cables of the designated type, see Cisco UCS C220 M6 SFF Rack Server Spec Sheet. |
KVM adaptors are available to order from Cisco.
These components are field replaceable:
Hard disks
Power supply units (PSUs)
Fan module
SFP network connection modules (1 Gb and 10 Gb)
 Caution |
To avoid compatibility issues, use only the supplied SFPs, and follow the other requirements for SFPs in Task 2: Insert the SFP Network Connection Modules. |
If you need to begin a Return Material Authorization (RMA) for any reason, go to Cisco Returns Portal.
Feedback