Managing the I/O Modules

This chapter includes the following sections:

I/O Module Management in Cisco UCS Manager GUI

You can manage and monitor all I/O modules in a Cisco UCS domain through Cisco UCS Manager GUI.

Acknowledging an IO Module

Cisco UCS Manager Release 2.2(4) introduces the ability to acknowledge a specific IO module in a chassis.

Note

This operation rebuilds the network connectivity between the IO module and the Fabrics to which it is connected.

Procedure
     Command or ActionPurpose
    Step 1In the Navigation pane, click Equipment.    
    Step 2Expand Equipment > Chassis > Chassis Number > IO Modules.    
    Step 3Choose the I/O module that you want to acknowledge.    
    Step 4In the Work pane, click the General tab.    
    Step 5In the Actions area, click Acknowledge IO Module.    
    Step 6In the Acknowledge IO Module confirmation box, click Yes.    

    Resetting an I/O Module

    Procedure
      Step 1   In the Navigation pane, click Equipment.
      Step 2   Expand Equipment > Chassis > Chassis Number > IO Modules.
      Step 3   Choose the I/O module that you want to reset.
      Step 4   In the Work pane, click the General tab.
      Step 5   In the Actions area, click Reset IO Module.
      Step 6   If a confirmation dialog box displays, click Yes.

      Viewing the POST Results for an I/O Module

      You can view any errors collected during the Power On Self-Test process for an I/O module.

      Procedure
        Step 1   In the Navigation pane, click Equipment.
        Step 2   Expand Equipment > Chassis > Chassis Number > IO Modules.
        Step 3   Choose the I/O module for which you want to view the POST results.
        Step 4   In the Work pane, click the General tab.
        Step 5   In the Actions area, click View POST Results.

        The POST Results dialog box lists the POST results for the I/O module.

        Step 6   Click OK to close the POST Results dialog box.