The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
F1935
BIOS FD0 Verification Failed. Please update and reactivate BIOS.
This fault indicates, BIOS failed secure boot.
Activate the bakcup BIOS image or flash the BIOS again.
If the issue persists, then contact Cisco TAC.
Severity: critical
Cause: BIOS-image-corrupted
mibFaultCode: F1935
mibFaultName: fltBiosUnitFD0FailedSecurityVerification
moClass: bios:Unit
Type: security
F1934
Intel PCH Secure Fuse Verification Failed. Please contact Cisco TAC.
This fault indicates that the Intel PCH secure fuse verification has failed.
If this fault is seen in conjunction with fltBiosUnitFD0FailedSecurityVerification, then re-attempt the BIOS update and activation. Reboot the Cisco IMC.
Otherwise, contact Cisco TAC.
Severity: critical
Cause: equipment-unhealthy
mibFaultCode: F1934
mibFaultName: fltComputeBoardFailedSecureFuseValidation
moClass: compute:Board
Type: equipment
F0744
P-State lowered as consumption hit power cap for server [chassisId]/[slotId]P-State lowered as consumption hit power cap for server [id]
This fault typically occurs when Cisco UCS Manager is actively capping the power for the server.
No action is needed.
Severity: info
Cause: power-consumption-hit-limit
mibFaultCode: F0744
mibFaultName: fltPowerBudgetPowerCapReachedCommit
moClass: power:Budget
Type: environmental
Feedback