The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter contains the following sections:
F0462
System Event log is Full: Clear the log
Cisco Integrated Management Controller (CIMC) has detected that the System Event Log (SEL) is full.
If you see this fault, clear the System Event Log (SEL).
Severity: info
Cause: log-capacity
mibFaultCode: 462
mibFaultName: fltSysdebugMEpLogMEpLogFull
moClass: sysdebug : MEpLog
Type: operational
F0460
System Event log capacity is low.
Cisco Integrated Management Controller (CIMC) has detected that the System Event Log (SEL) on the server is almost full.
If you see this fault, clear the System Event Log (SEL).
 Note |
This fault can be ignored if you do not want to clear the SEL now. |
Severity: info
Cause: log-capacity
mibFaultCode: 460
mibFaultName: fltSysdebugMEpLogMEpLogLow
moClass: Sysdebug : MEpLog
Type: operational
F0461
System Event log capacity is very low.
This fault indicates that the Cisco Integrated Management Controller (CIMC) has detected that the System Event Log (SEL) on the server is almost full.
If you see this fault, clear the System Event Log (SEL).
Note |
This fault can be ignored if you do not want to clear the SEL now. |
Severity: info
Cause: log-capacity
mibFaultCode: 461
mibFaultName: fltSysdebugMEpLogMEpLogVeryLow
moClass: sysdebug : MEpLog
Type: operational
Feedback