Technical Specifications

This appendix contains these topics:

Environmental Specifications

This table describes the environmental specifications.

Table 1. Environmental Specifications for All Catalyst 2960-X Switches

Environmental Ranges

Operating temperature

1

23 to 113°F (–5 to 45°C) up to 5,000 ft (1500 m)


23 to 104°F (–5 to 40°C) up to 10,000 ft (3000 m)

Storage temperature

–40 to 158°F (–40 to 70°C) up to 15,000 ft (4500 m)

Relative humidity

10 to 95% (noncondensing)

Storage altitude

Up to 15,000 ft (4500 m)

1 Minimum ambient temperature for cold start is 32°F (0°C)

Specifications for the Catalyst 2960-X Switches

Table 2. Catalyst 2960X-48FPD-L, 2960X-48LPD-L, 2960X-24PD-L, 2960X-48FPS-L, 2960X-48LPS-L, and 2960X-24PS-L Switch Specifications

Power Requirements

AC input voltage







100 to 240 VAC (autoranging)

  • 9 to 4 A, 50 to 60 Hz (Catalyst 2960X-48FPD-L)

  • 5 to 2 A, 50 to 60 Hz (Catalyst 2960X-48LPD-L)
  • 
5 to 2 A, 50 to 60 Hz (Catalyst 2960X-24PD-L)

  • 9 to 4 A, 50 to 60 Hz (Catalyst 2960X-48FPS-L)
  • 
5 to 2 A, 50 to 60 Hz (Catalyst 2960X-48LPS-L)

  • 5 to 2 A, 50 to 60 Hz (Catalyst 2960X-24PS-L)

DC input voltage for 
RPS 2300


  • +12 V @ 4 A, –53 V @ 15 A (Catalyst 2960X-48FPD-L)

  • +12 V @ 4 A, –53 V @ 8 A (Catalyst 2960X-48LPD-L)

  • +12 V @ 3A, –53 V @ 8 A (Catalyst 2960X-24PD-L)
  • 
12 V @ 4 A, –53 V @ 15 A (Catalyst 2960X-48FPS-L)

  • +12 V @ 4 A, –53 V @ 8 A (Catalyst 2960X-48LPS-L)

  • +12 V @ 3 A, –53 V @ 8 A (Catalyst 2960X-24PS-L)

Power consumption

  • 149 W, 508 BTUs per hour (Catalyst 2960X-48FPD-L)

  • 103 W, 351 BTUs per hour (Catalyst 2960X-48LPD-L)

  • 92 W, 313 BTUs per hour (Catalyst 2960X-24PD-L)

  • 149 W, 508 BTUs per hour (Catalyst 2960X-48FPS-L)
  • 102 W, 348 BTUs per hour (Catalyst 2960X-48LPS-L)
  • 90 W, 307 BTUs per hour (Catalyst 2960X-24PS-L)

Power rating

  • 0.89 KVA (Catalyst 2960X-48FPD-L)

  • 0.48 KVA (Catalyst 2960X-48LPD-L)

  • 0.47 KVA (Catalyst 2960X-24PD-L)

  • 0.89 KVA (Catalyst 2960X-48FPS-L)

  • 0.49 KVA (Catalyst 2960X-48LPS-L)

  • 0.49 KVA (Catalyst 2960X-24PS-L)

PoE+

  • 30 W-per-port maximum, 740-W switch maximum 
(Catalyst 2960X-48FPD-L and 2960X-48FPS-L switches)

  • 15.4 W-per-port maximum, 370-W switch maximum 
(Catalyst 2960X-48LPD-L, 2960X-24PD-L, 2960X-48LPS-L, and 2960X-24PS-L switches)
    Note 

    The Catalyst 2960X-48LPD-L and 2960X-48LPS-L can support up to 12 ports of PoE+ (30 W-per-port).

Physical Dimensions

Weight



  • 12.9 lb (5.8 kg) (Catalyst 2960X-48FPD-L)

  • 12.8 lb (5.8 kg) (Catalyst 2960X-48LPD-L)

  • 12.7 lb (5.8 kg) (Catalyst 2960X-24PD-L)
  • 13.2 (6.0 kg) (Catalyst 2960X-48FPS-L)

  • 
12.9 lb (5.8 kg) (Catalyst 2960X-48LPS-L)

  • 12.8 lb (5.8 kg) (Catalyst 2960X-24PS-L)

Dimensions (H x D x W)

1.75 x 14.50 x 17.5 in. (4.45 x 36.83 x 44.5 cm). Applies to all PoE switches except the Catalyst 2960X-24PSQ-L switch.

1.75 x 11.02 x 17.5 in. (4.45 x 28.0 x 44.5 cm). Applies to the Catalyst 2960X-24PSQ-L switch.

2 Power consumption values for the power consumed internally by the switch at 120 VAC 60 Hz. The information is based on the rating of the power supply (maximum) and does not reflect the actual measured consumption numbers. For the actual power consumption based on measurement, see the data sheet at: http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps12995/data_sheet_c78-728232.html
3 Power rating values for the switch input power.
Table 3. Catalyst 2960X-48TD-L, 2960X-24TD-L, 2960X-48TS-L, 2960X-24TS-L, 2960X-48TS-LL, 2960X-F24TS-LL, Switch Specifications

Power Requirements

AC input voltage




100 to 240 VAC (autoranging)

  • 1 to 0.5 A, 50 to 60 Hz (Catalyst 2960X-48TD-L)
  • 1 to 0.5 A, 50 to 60 Hz (Catalyst 2960X-24TD-L)
  • 1 to 0.5, 50 to 60 Hz (Catalyst 2960X-48TS-L)
  • 1 to 0.5 A, 50 to 60 Hz (Catalyst 2960X-24TS-L)

  • 1 to 0.5 A, 50 to 60 Hz (Catalyst 2960X-48TS-LL)
  • 1 to 0.5 A,, 50 to 60 Hz (Catalyst 2960X-24TS-LL)


DC input voltage for 
RPS 2300


  • +12 V @ 4 A, –53 V @ 8 A (Catalyst 2960X-48TD-L)

  • +12 V @ 3 A, (Catalyst 2960X-24TD-L)

  • +12 V @ 5 A, (Catalyst 2960X-48TS-L)
  • 
+12 V @ 4 A, (Catalyst 2960X-24TS-L)

Power consumption 

4

  • 47 W, 161 BTUs per hour (Catalyst 2960X-48TD-L)

  • 32 W, 110 BTUs per hour (Catalyst 2960X-24TD-L)

  • 49 W, 168 BTUs per hour (Catalyst 2960X-48TS-L)

  • 37 W, 126 BTUs per hour (Catalyst 2960X-24TS-L)

  • 55 W, 187 BTUs per hour (Catalyst 2960X-48TS-LL)

  • 37 W, 126 BTUs per hour (Catalyst 2960X-24TS-LL)


Power rating5

  • 
0.049 KVA (Catalyst 2960X-48TD-L)
  • 0.034 KVA (Catalyst 2960X-24TD-L)

  • 0.051 KVA (Catalyst 2960X-48TS-L)

  • 0.039 KVA (Catalyst 2960X-24TS-L)

  • 0.46 KVA (Catalyst 2960X-48TS-LL)
  • 0.035 KVA (Catalyst 2960X-24TS-LL)


Physical Dimensions

Weight


Dimensions (H x D x W)

9.6 lb (4.3 kg) Catalyst 2960X-48TD-L

8.9 lb (4.0 kg) Catalyst 2960X-24TD-L

9.4 lb (4.2 kg) Catalyst 2960X-48TS-L

8.9 lb (4.0 kg) Catalyst 2960X-24TS-L

8.9 lb (4.0 kg) Catalyst 2960X-48TS-LL

8.2 lb (3.7 kg) Catalyst 2960X-24TS-LL

1.75 x 11 x 17.50 in. (4.45 x 27.94 x 44.5 cm) All non-PoE switches.

4 Power consumption values for the power consumed internally by the switch at 120 VAC 60 Hz. The information is based on the rating of the power supply (maximum) and does not reflect the actual measured consumption numbers. For the actual power consumption based on measurement, see the data sheet at: http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps12995/data_sheet_c78-728232.html
5 Power rating values for the switch input power.