O Commands

oam-channel

{ oam-channel <val> } | { no oam-channel }

Syntax Description

oam-channel

oam-channel used

val

2 - nvo3 tissa

Command Mode

  • /exec/configure/configngoamprofile

obfl logging uuid msg

obfl logging uuid <uuid> <log-file> msg <log_str>

Syntax Description

obfl

Perform the OBFL operation

logging

Perform the logging

uuid

UUID of the process

uuid

UUID of the process

log-file

Log File of your process

msg

Message to be Logged in the file

log_str

Type the message to be logged

Command Mode

  • /exec

object-group ip address

[no] object-group ip address <name>

Syntax Description

no

(Optional) Negate a command or set its defaults

object-group

Configure ACL object groups

ip

IP Object groups

address

Address object group

name

object-group name

Command Mode

  • /exec/configure

object-group ip port

[no] object-group ip port <name>

Syntax Description

no

(Optional) Negate a command or set its defaults

object-group

Configure ACL object groups

ip

IP Object groups

port

IP port object group (can be used in IPv4 and IPv6 access-lists)

name

object-group name

Command Mode

  • /exec/configure

object-group ipv6 address

[no] object-group ipv6 address <name>

Syntax Description

no

(Optional) Negate a command or set its defaults

object-group

Configure ACL object groups

ipv6

IPv6 Object groups

address

Address object group

name

object-group name

Command Mode

  • /exec/configure

object-group udp relay ip address

object-group udp relay ip address <obj-grp-name>

Syntax Description

object-group

Configure object groups

udp

Configure UDP

relay

Configure UDP Relay

ip

IP Object groups

address

Address object group

obj-grp-name

object-group name

Command Mode

  • /exec/configure

object-group udp relay ip address

[no] object-group udp relay ip address <obj-grp-name>

Syntax Description

no

Negate a command or set its defaults

object-group

Configure object groups

udp

Configure UDP

relay

Configure UDP Relay

ip

IP Object groups

address

Address object group

obj-grp-name

object-group name

Command Mode

  • /exec/configure

of-port interface

[no] of-port interface <ifname>

Syntax Description

no

(Optional) Negate a command or set its defaults

of-port

Add interfaces to openflow switch

interface

Interface

ifname

interface name

Command Mode

  • /exec/configure/openflow/switch

offset-list route in

[no] offset-list { { route-map <map> } | { prefix-list <list> } } { in | out } <offset> <interface>

Syntax Description

no

(Optional) Negate a command or set its defaults

offset-list

Add or subtract offset from EIGRP metrics

route-map

Use a route-map for offset-list selection

map

Route-map name

prefix-list

Use a prefix-list for offset-list selection

list

Reference to prefix-list name

in

Perform offset on incoming updates

out

Perform offset on outgoing updates

offset

Offset

interface

Interface name

Command Mode

  • /exec/configure/router-eigrp/router-eigrp-vrf-common /exec/configure/router-eigrp/router-eigrp-af-common

onep

[no] onep

Syntax Description

no

(Optional) Negate a command or set its defaults

onep

Enable/Disable One Platform

Command Mode

  • /exec/configure

onep applications

[no] onep applications <config-domain>

Syntax Description

no

(Optional) Negate a command or set its defaults

onep

One Platform

applications

One platform applications

config-domain

Virtual service name or tag used by remote onep applications to retrieve its configuration

Command Mode

  • /exec/configure

onep install

onep install <xsd-location> <config-domain>

Syntax Description

onep

One Platform

install

install a CLI definition

xsd-location

the xsd file containing the onep application CLI definition

config-domain

virtual service name or tag used by remote onep applications to retrieve its configuration

Command Mode

  • /exec

onep stop

onep stop { session { all | <onep-session-id> } }

Syntax Description

onep

One Platform

stop

Stop specific activity

session

One Platform session

all

All sessions

onep-session-id

Specific session name

Command Mode

  • /exec

onep uninstall

onep uninstall <app-name> <app-version> <config-domain> [ force ]

Syntax Description

onep

One Platform

uninstall

uninstall a CLI definition

app-name

application name

app-version

application version

config-domain

virtual service name or tag used by remote onep applications to retrieve its configuration

force

(Optional) force uninstallation

Command Mode

  • /exec

open-fsm

[no] open-fsm

Syntax Description

no

(Optional) Negate a command or set its defaults

open-fsm

Enable session open FSM for establishing BGP sessions

Command Mode

  • /exec/configure/router-bgp

openflow

[no] openflow

Syntax Description

no

(Optional) Negate a command or set its defaults

openflow

OpenFlow configuration

Command Mode

  • /exec/configure

operation-packet-priority normal

{ { no | default } operation-packet-priority | operation-packet-priority { normal | high } }

Syntax Description

no

default

Set a command to its defaults

operation-packet-priority

Set operation packet properties

high

Priority high

normal

Priority normal

Command Mode

  • /exec/configure/ip-sla/jitter

option exporter-stats timeout

{ [ no ] option exporter-stats timeout <time> | no option exporter-stats timeout }

Syntax Description

option

Version 9 Option Templates and Data

exporter-stats

Exporter Statistics Option

timeout

Option resend time

time

Time in seconds

Command Mode

  • /exec/configure/nfm-exporter-v9

option interface-table timeout

{ [ no ] option interface-table timeout <time> | no option interface-table timeout }

Syntax Description

option

Version 9 Option Templates and Data

interface-table

Interface Table Option

timeout

Option resend time

time

Time in seconds

Command Mode

  • /exec/configure/nfm-exporter-v9

orib event-history

[no] orib event-history { cli | ipc | uroute | mroute | mroute_only | uhw | mhw | ha | internal } { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

orib

Display ORIB information

event-history

ORIB event logs

cli

ORIB cli logs

ipc

ORIB ipc logs

uroute

ORIB unicast route logs

mroute

ORIB multicast route logs

mroute_only

ORIB multicast route logs without mhw

uhw

ORIB unicast platform logs

mhw

ORIB multicast platform logs

ha

ORIB ha logs

internal

ORIB internal logs

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

  • /exec/configure

orib orib_api_init

{ orib orib_api_init <client-name> } | { orib orib_api_close } | { orib orib_add_route <client-name> <mac> [ <nh> | <nh6> ] <if-name> } | { orib orib_delete_route <client-name> <mac> [ <nh> | <nh6> ] <if-name> }

Syntax Description

orib

Use ORIB API routines from OTV process

orib_api_init

Call orib_api_init() from the OTV process

orib_api_close

Call orib_api_close() from the OTV process

orib_add_route

Call orib_add_route() from OTV process

orib_delete_route

Call orib_delete_route() from OTV process

client-name

Client name registered to ORIB process

mac

VLAN-ID/MAC Address tuple in vvvv-aaaa.bbbb.cccc format

nh

(Optional) Next-hop IPv4 address

if-name

Next-hop interface (iod)

Command Mode

  • /exec

ospfv3 authentication

ospfv3 authentication { disable | ipsec spi <spi_id> { md5 <akey> | sha1 <akey> } } | no ospfv3 authentication { disable | ipsec spi <spi_id> }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

authentication

Enable Authentication

disable

Disable Authentication

ipsec

IPSec

spi

Security Parameter Index

spi_id

SPI Value

md5

Use the MD5 algorithim

akey

Authentication Key

sha1

Use the SHA1 algorithim

akey

Authentication Key

Command Mode

  • /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ospfv3 bfd

[no] ospfv3 bfd [ disable ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

bfd

Enable BFD on this interface

disable

(Optional) Disable BFD on this interface

Command Mode

  • /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mgmt-config

ospfv3 cost

{ ospfv3 cost <cost> } | { no ospfv3 cost [ <cost> ] }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

cost

Cost associated with interface

cost

Cost value

Command Mode

  • /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ospfv3 dead-interval

{ ospfv3 dead-interval <interval> } | { no ospfv3 dead-interval [ <interval> ] }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

dead-interval

Dead interval

interval

(seconds)

Command Mode

  • /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ospfv3 event-history

[ no ospfv3 event-history { adjacency | event | ha | flooding | lsa | spf | redistribution | hello | spf-trigger } ] | [ ospfv3 event-history { adjacency | event | ha | flooding | lsa | spf | redistribution | hello | spf-trigger } size { <size_in_text> | <size_in_Kbytes> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ospfv3

(Optional) Debugging functions

event-history

(Optional) log debug events into event history buffer

adjacency

(Optional) Adjacency formation logs

event

(Optional) Internal event logs

ha

(Optional) HA and GR logs

flooding

(Optional) LSA flooding logs

lsa

(Optional) LSA generation and databse logs

spf

(Optional) SPF calculation logs

redistribution

(Optional) Redistribution logs

hello

(Optional) HELLO related logs

spf-trigger

(Optional) SPF TRIGGER related logs

size

(Optional) Configure the size of the event-hist buffer

size_in_text

(Optional) Buffer size

size_in_Kbytes

(Optional) Size of the file in kbytes

Command Mode

  • /exec/configure/router-ospf3

ospfv3 event-history cli size

[ no ospfv3 event-history cli ] | [ ospfv3 event-history cli size { <size_in_text> | <size_in_Kbytes> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ospfv3

(Optional) Debugging functions

event-history

(Optional) log debug events into event history buffer

cli

(Optional) Cli logs

size

(Optional) Configure the size of the event-hist buffer

size_in_text

(Optional) Buffer size

size_in_Kbytes

(Optional) Size of the file in kbytes

Command Mode

  • /exec/configure/router-ospf3

ospfv3 event-history detail

[no] ospfv3 event-history detail

Syntax Description

no

Negate a command or set its defaults

ospfv3

Debugging functions

event-history

log debug events into event history buffer

detail

Detailed event history buffer

Command Mode

  • /exec/configure/router-ospf3

ospfv3 event-history detail size

[ no ospfv3 event-history detail ] | [ ospfv3 event-history detail size { <size_in_text> | <size_in_Kbytes> } ]

Syntax Description

no

(Optional) Negate a command or set its defaults

ospfv3

(Optional) Debugging functions

event-history

(Optional) log debug events into event history buffer

detail

(Optional) Detailed event history buffer

size

(Optional) Configure the size of the event-hist buffer

size_in_text

(Optional) Buffer size

size_in_Kbytes

(Optional) Size of the file in kbytes

Command Mode

  • /exec/configure/router-ospf3

ospfv3 flood-bw-percentage

[no] ospfv3 flood-bw-percentage <percentage>

Syntax Description

no

(Optional) Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

flood-bw-percentage

Percentage of bandwidth used for flooding

percentage

Negate a command or set its defaults

Command Mode

  • /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ospfv3 hello-interval

{ ospfv3 hello-interval <interval> } | { no ospfv3 hello-interval [ <interval> ] }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

hello-interval

Hello interval

interval

(seconds)

Command Mode

  • /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ospfv3 instance

{ ospfv3 instance <instance-id> } | { no ospfv3 instance [ <instance-id> ] }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

instance

Instance identifier

instance-id

Instance identifier value

Command Mode

  • /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ospfv3 mtu-ignore

[no] ospfv3 mtu-ignore

Syntax Description

no

(Optional) Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

mtu-ignore

Disable OSPF MTU mismatch detection

Command Mode

  • /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ospfv3 network broadcast

{ ospfv3 network { broadcast | point-to-point } } | { no ospfv3 network [ { broadcast | point-to-point } ] }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

network

Network type

broadcast

Specify OSPF broadcast multi-access network

point-to-point

Specify OSPF point-to-point network

Command Mode

  • /exec/configure/if-broadcast /exec/configure/if-p2p /exec/configure/if-mgmt-config

ospfv3 network point-to-point

{ ospfv3 network point-to-point } | { no ospfv3 network [ point-to-point ] }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

network

Network type

point-to-point

Specify OSPF point-to-point network

Command Mode

  • /exec/configure/if-loopback

ospfv3 passive-interface

[ default | no ] ospfv3 passive-interface

Syntax Description

default

(Optional) Undo a command

no

(Optional) Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

passive-interface

Suppress routing updates on the interface

Command Mode

  • /exec/configure/if-broadcast /exec/configure/if-p2p /exec/configure/if-mgmt-config

ospfv3 priority

{ ospfv3 priority <prio> } | { no ospfv3 priority [ <prio> ] }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

priority

Router priority

prio

Router priority

Command Mode

  • /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ospfv3 retransmit-interval

{ ospfv3 retransmit-interval <interval> } | { no ospfv3 retransmit-interval [ <interval> ] }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

retransmit-interval

Packet retransmission interval

interval

(seconds)

Command Mode

  • /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

ospfv3 shutdown

[no] ospfv3 shutdown

Syntax Description

no

(Optional) Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

shutdown

Shutdown ospf on this interface

Command Mode

  • /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mgmt-config

ospfv3 transmit-delay

{ ospfv3 transmit-delay <delay> } | { no ospfv3 transmit-delay [ <delay> ] }

Syntax Description

no

Negate a command or set its defaults

ospfv3

OSPFv3 configuration commands

transmit-delay

Packet transmission delay

delay

(seconds)

Command Mode

  • /exec/configure/if-igp /exec/configure/if-gre-tunnel /exec/configure/if-mpls-tunnel /exec/configure/if-mgmt-config

other-config-flag

[no] other-config-flag <state>

Syntax Description

no

(Optional) Negate a command or set its defaults

state

Command Mode

  • /exec/configure/config-ra-guard

overbudgetshut

overbudgetshut [ module <module> ]

Syntax Description

overbudgetshut

Shut down the specified LCs due to power over budget

module

(Optional) Module Force Shut down

module

(Optional) please enter the module number

Command Mode

  • /exec

overbudgetsyslog

overbudgetsyslog

Syntax Description

overbudgetsyslog

Print Syslog to indicate power over budget

Command Mode

  • /exec

overlay-encapsulation

overlay-encapsulation <encap-type> [ tunnel-control-frames [ <layer2-prot> ] ] | no overlay-encapsulation

Syntax Description

no

Negate a command or set its defaults

overlay-encapsulation

NVE Overlay Encapsulation

encap-type

Configure encapsulation type

tunnel-control-frames

(Optional) tunnel protocol

layer2-prot

(Optional) configure specific protocol

Command Mode

  • /exec/configure/if-nve

overload rip

overload rip

Syntax Description

overload

rip

Forced RIP overload

Command Mode

  • /exec

overwrite-vlan

[no] overwrite-vlan <ow-vlan-id>

Syntax Description

no

(Optional) Negate a command or set its defaults

overwrite-vlan

Overwrite the system generated vlan

ow-vlan-id

Command Mode

  • /exec/configure/static-host/vni

owner

{ { no | default } owner | owner <text> }

Syntax Description

no

default

Set a command to its defaults

owner

Owner of Entry

text

Owner String

Command Mode

  • /exec/configure/ip-sla/udp /exec/configure/ip-sla/jitter /exec/configure/ip-sla/tcp /exec/configure/ip-sla/icmpEcho /exec/configure/ip-sla/dns /exec/configure/ip-sla/fabricPathEcho /exec/configure/ip-sla/http