F Commands

fabric-soo

[no] fabric-soo { <ext-comm-soo-aa2nn4> | <ext-comm-soo-aa4nn2> }

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric-soo

Fabric Site of Origin

ext-comm-soo-aa4nn2

VPN extcommunity in aa4:fabric_id format

ext-comm-soo-aa2nn4

VPN extcommunity in aa:fabric_id format

Command Mode

  • /exec/configure/router-bgp

fabric database auto-pull dci node-id

fabric database auto-pull dci node-id <mgmt-ip-address>

Syntax Description

fabric

Fabric

database

Fabric Database

auto-pull

Pull configuration

dci

DCI profile

node-id

management ip address of this node

mgmt-ip-address

IP address in CIDR format

Command Mode

  • /exec

fabric database auto-pull dci vrf node-id

fabric database auto-pull dci vrf <vrf-name> node-id <mgmt-ip-address> [ peer-id <peer-ip-address> ]

Syntax Description

fabric

Fabric

database

Fabric Database

auto-pull

Pull configuration

dci

DCI profile

vrf

Display per-VRF information

vrf-name

VRF name

node-id

management ip address of this node

mgmt-ip-address

IP address in CIDR format

peer-id

(Optional) management ip address of peer

peer-ip-address

(Optional) IP address in CIDR format

Command Mode

  • /exec

fabric database auto-pull vni interface

fabric database auto-pull { vni <vni-id> | dot1q <vlan-id> } interface <interface-id> [ { overwrite-vlan | overwrite-bd } <ow-vlan-id> ]

Syntax Description

fabric

Fabric

database

Fabric Database

auto-pull

Pull configuration

vni

Pull ethernet-tag vni configuration

vni-id

dot1q

Pull ethernet-tag dot1q configuration

vlan-id

interface

Applied interface

interface-id

Name of interface

overwrite-vlan

(Optional) Overwrite the system generate vlan

overwrite-bd

(Optional) Overwrite the system generate bd

ow-vlan-id

(Optional)

Command Mode

  • /exec

fabric database inherit-profile-map

{ fabric database inherit-profile-map <id> } | { no fabric database inherit-profile-map }

Syntax Description

no

Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

inherit-profile-map

Inherit a profile map. All non-global mappings will be inherited.

id

Profile Map ID

Command Mode

  • /exec/configure/if-eth-any /exec/configure/if-port-channel

fabric database internal vpc-update-count

[no] fabric database internal vpc-update-count <value> [ reset ]

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

database

internal

Internal information

vpc-update-count

Set auto-config vPC update counter

value

Set number auto-config vPC updates before checking for CPU yield

reset

(Optional) reset the outstanding counter

Command Mode

  • /exec/configure

fabric database mobility-domain

[no] fabric database mobility-domain <name>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

mobility-domain

Tag to identify mobility domain name

name

Mobility Domain Name

Command Mode

  • /exec/configure

fabric database override-profile

[no] fabric database override-profile <profilename>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

override-profile

Override the network profile name

profilename

Enter the profile name to override network profile

Command Mode

  • /exec/configure

fabric database override-vrf-profile

[no] fabric database override-vrf-profile <profilename>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

override-vrf-profile

Override the VRF (partition) profile name

profilename

Enter the profile name to override VRF profile

Command Mode

  • /exec/configure

fabric database profile-map

[no] fabric database profile-map <id>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

profile-map

Configure a profile map

id

Profile Map ID

Command Mode

  • /exec/configure

fabric database profile-map global

[no] fabric database profile-map global

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

profile-map

Configure a profile map

global

Global profile (apply to all interfaces)

Command Mode

  • /exec/configure

fabric database refresh dot1q

fabric database refresh dot1q <vlan-id> [ { mobility-domain <name> | interface <interface-id> } ]

Syntax Description

fabric

Fabric

database

Fabric Database

refresh

Refresh profile configuration

dot1q

Dot1Q Encapsulation

vlan-id

interface

(Optional) Applied interface

interface-id

(Optional) Name of interface

mobility-domain

(Optional) Tag to identify mobility domain name

name

(Optional) Mobility Domain Name

Command Mode

  • /exec

fabric database refresh vni

fabric database refresh { vni <vni-id> | include-vrf { <vrf-name> } }

Syntax Description

fabric

Fabric

database

Fabric Database

refresh

Refresh profile configuration

vni

Virtual Network Identifier

vni-id

include-vrf

Include VRF name

vrf-name

VRF name

Command Mode

  • /exec

fabric database static-host

[no] fabric database static-host

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Fabric Database

static-host

Configure a static host

Command Mode

  • /exec/configure

fabric database timer

[no] fabric database timer { aging | cleanup | recovery | re-add } <timeout>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

database

timer

HMM timers

cleanup

Delay in minutes before profile is deleted

recovery

Delay in minutes before recovered profile is deleted

re-add

Delay in minutes before new client requests (after un-apply) are accepted

aging

Delay in minutes before profile is checked for aging

timeout

Set timeout in minutes

Command Mode

  • /exec/configure

fabric database type bl-dci

[no] fabric database type bl-dci

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

type

Configure database type

bl-dci

Border Leaf - DCI

Command Mode

  • /exec/configure

fabric database type cabling

[no] fabric database type cabling

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

type

Configure database type

cabling

Cable Management Database

Command Mode

  • /exec/configure

fabric database type host

[no] fabric database type host

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

type

Configure database type

host

Host Database

Command Mode

  • /exec/configure

fabric database type network

[no] fabric database type network

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

type

Configure database type

network

Network Database

Command Mode

  • /exec/configure

fabric database type partition

[no] fabric database type partition

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

type

Configure database type

partition

Partition Database

Command Mode

  • /exec/configure

fabric database type profile

[no] fabric database type profile

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

database

Configure Fabric Database

type

Configure database type

profile

Port or Switch Profile Database

Command Mode

  • /exec/configure

fabric forwarding admin-distance

{ fabric forwarding admin-distance <distance> } | { no fabric forwarding admin-distance }

Syntax Description

no

Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

admin-distance

Administrative distance for HMM host routes

distance

Set the administrative distance for HMM (default is 190)

Command Mode

  • /exec/configure

fabric forwarding anycast-gateway-mac

{ fabric forwarding anycast-gateway-mac <mac-addr> } | { no fabric forwarding anycast-gateway-mac }

Syntax Description

no

Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

anycast-gateway-mac

Anycast Gateway MAC of the Switch

mac-addr

MAC address

Command Mode

  • /exec/configure

fabric forwarding dup-host-ip-addr-detection

{ fabric forwarding dup-host-ip-addr-detection <mmoves> <nsecs> | no fabric forwarding dup-host-ip-addr-detection }

Syntax Description

no

Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

dup-host-ip-addr-detection

To detect duplicate host address in n secs

mmoves

Set Number of host moves to be allowed in n secs. Default is 5

nsecs

Set the duplicate detection timeout in secs for host moves. Default is 180

Command Mode

  • /exec/configure

fabric forwarding dup-host-recovery-timer recover-count

{ fabric forwarding dup-host-recovery-timer <timeout> recover-count <count> | no fabric forwarding dup-host-recovery-timer }

Syntax Description

no

Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

dup-host-recovery-timer

Refresh the frozen duplicate host

timeout

Set the timeout in secs to refresh the duplicate host. Default is 30 secs

recover-count

Maximum number of refreshes

count

Set the maximum number of host refresh. Default is 5.

Command Mode

  • /exec/configure

fabric forwarding dup-host-unfreeze-timer unfreeze-count

{ fabric forwarding dup-host-unfreeze-timer <timeout> unfreeze-count <count> | no fabric forwarding dup-host-unfreeze-timer }

Syntax Description

no

Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

dup-host-unfreeze-timer

Refresh the frozen duplicate host

timeout

Set the timeout in secs to refresh the duplicate host. Default is 180 secs

unfreeze-count

Maximum number of refreshes

count

Set the maximum number of host refresh

Command Mode

  • /exec/configure

fabric forwarding limit-vlan-mac

[no] fabric forwarding limit-vlan-mac <max-limit>

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

limit-vlan-mac

Maximum number of end-hosts allowed to have the same (vlan, MAC) mapping in a given vrf (Default is 2048)

max-limit

Set max-limit

Command Mode

  • /exec/configure

fabric forwarding mode anycast-gateway

{ fabric forwarding mode anycast-gateway } | { no fabric forwarding mode }

Syntax Description

no

Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

mode

Forwarding Modes

anycast-gateway

Anycast Gateway Forwarding Mode

Command Mode

  • /exec/configure/if-vlan /exec/configure/if-vlan-range

fabric forwarding selective-host-probe

[no] fabric forwarding selective-host-probe

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

selective-host-probe

Trigger unconditional host probe

Command Mode

  • /exec/configure

fabric forwarding system-check ready

fabric forwarding system-check { ready | not-ready }

Syntax Description

fabric

Fabric

forwarding

Fabric Forwarding Protocol: Host Mobility Manager (HMM)

system-check

System check

ready

Set to ready

not-ready

Set to not ready

Command Mode

  • /exec

fabric multicast event-history bgp

[no] fabric multicast event-history bgp { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

multicast

Configure multicast

event-history

Configure event-history buffer

bgp

BGP events for fabric multicast

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

  • /exec/configure

fabric multicast event-history ha

[no] fabric multicast event-history ha { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

multicast

Configure multicast

event-history

Configure event-history buffer

ha

ha events for fabric multicast

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

  • /exec/configure

fabric multicast event-history hmm

[no] fabric multicast event-history hmm { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

multicast

Configure multicast

event-history

Configure event-history buffer

hmm

HMM events for fabric multicast

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

  • /exec/configure

fabric multicast event-history internal

[no] fabric multicast event-history internal { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

multicast

Configure multicast

event-history

Configure event-history buffer

internal

internal events for fabric multicast

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

  • /exec/configure

fabric multicast event-history isis

[no] fabric multicast event-history isis { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

multicast

Configure multicast

event-history

Configure event-history buffer

isis

ISIS events for fabric multicast

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

  • /exec/configure

fabric multicast event-history m2rib

[no] fabric multicast event-history m2rib { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

multicast

Configure multicast

event-history

Configure event-history buffer

m2rib

M2RIB events for fabric multicast

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

  • /exec/configure

fabric multicast event-history m6rib

[no] fabric multicast event-history m6rib { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

multicast

Configure multicast

event-history

Configure event-history buffer

m6rib

M6RIB events for fabric multicast

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

  • /exec/configure

fabric multicast event-history mrib

[no] fabric multicast event-history mrib { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

multicast

Configure multicast

event-history

Configure event-history buffer

mrib

MRIB events for fabric multicast

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

  • /exec/configure

fabric multicast event-history pim

[no] fabric multicast event-history pim { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

multicast

Configure multicast

event-history

Configure event-history buffer

pim

PIM events for fabric multicast

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

  • /exec/configure

fabric multicast event-history pim6

[no] fabric multicast event-history pim6 { size { <size_in_text> | <size_in_kbytes> } }

Syntax Description

no

(Optional) Negate a command or set its defaults

fabric

Fabric

multicast

Configure multicast

event-history

Configure event-history buffer

pim6

PIM6 events for fabric multicast

size

Configure size

size_in_text

Buffer size

size_in_kbytes

Size in kbytes

Command Mode

  • /exec/configure

failaction

[no] failaction { [ node { reassign | drop | least-bucket | per-bucket } ] | [ bucket { distribute } ] | [ cluster drop ] }

Syntax Description

no

(Optional) Negate a command or set its defaults

failaction

ITD failaction

node

(Optional) ITD failaction node

reassign

(Optional) ITD failaction reassign

drop

(Optional) ITD failaction drop

least-bucket

(Optional) ITD failaction least-bucket node

per-bucket

(Optional) ITD failaction per-bucket node

bucket

(Optional) ITD failaction bucket reassign

distribute

(Optional) ITD failaction distribute reassign

cluster

(Optional) ITD failaction cluster

Command Mode

  • /exec/configure/itd

failaction

[no] failaction { node { reassign | drop } | cluster drop } +

Syntax Description

no

(Optional) Negate a command or set its defaults

failaction

Configure failaction for PLB service

node

PLB failaction node

reassign

PLB failaction reassign

drop

PLB failaction drop

cluster

PLB failaction cluster

Command Mode

  • /exec/configure/plb

fan speed default

fan speed { default | set <speed> }

Syntax Description

fan

configure fan param.

speed

configure fan speed.

default

fan reset to old speed.

set

fan speed set to

speed

fan speed

Command Mode

  • /exec/configure

fast-convergence

fast-convergence | no fast-convergence

Syntax Description

no

Negate a command or set its defaults

fast-convergence

Enable vPC fast-convergence

Command Mode

  • /exec/configure/vpc-domain

fast-external-fallover

[no] fast-external-fallover

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-external-fallover

Immediately reset the session if the link to a directly connected BGP peer goes down

Command Mode

  • /exec/configure/router-bgp

fast-flood enable

[no] fast-flood enable

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-flood

Fast flood the LSP's

enable

Turn on fast-flooding

Command Mode

  • /exec/configure/otv-isis/otv-isis-vrf-common

fast-flood enable

[no] fast-flood enable

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-flood

Fast flood the LSP's

enable

Turn on fast-flooding

Command Mode

  • /exec/configure/router-isis/router-isis-vrf-common

fast-flood interval

[no] fast-flood interval <interval>

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-flood

Fast flood the LSP's

interval

Duration/interval of the fast-flood timer.

interval

Specify the value (ms)

Command Mode

  • /exec/configure/otv-isis/otv-isis-vrf-common

fast-flood interval

[no] fast-flood interval <interval>

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-flood

Fast flood the LSP's

interval

Duration/interval of the fast-flood timer.

interval

Specify the value (ms)

Command Mode

  • /exec/configure/router-isis/router-isis-vrf-common

fast-reload

fast-reload { [ nxos <uri> | trigger-gr | save-config | [ non-interruptive | nosrg ] ] + | force-all [ nxos <uri> ] + } [ override ]

Syntax Description

fast-reload

fast-reload software

nxos

(Optional) boot-variable name

uri

(Optional) Enter image uri

non-interruptive

(Optional) Non-Interruptive image upgrade

nosrg

(Optional) nosrg

override

(Optional) Do fast-reload without impact check

trigger-gr

(Optional) Enable BGP GR for compatible peers

save-config

(Optional) Save running-config to startup-config before fast-reload

force-all

Force upgrade the system

Command Mode

  • /exec

fast-reload network-os

fast-reload network-os <uri>

Syntax Description

fast-reload

fast-reload software

network-os

non-cisco OS

uri

Enter image uri

Command Mode

  • /exec

fast-reroute

[no] fast-reroute | fast-reroute [ node-protect | bw-protect ] +

Syntax Description

no

Negate a command or set its defaults

fast-reroute

Specify mpls tunnel can be fast-rerouted

node-protect

(Optional) node protection desired

bw-protect

(Optional) bandwidth protection desired

Command Mode

  • /exec/configure/if-te /exec/configure/tunnel-te/cbts-member

fast-reroute backup-prot-preempt optimize-bw

[no] fast-reroute backup-prot-preempt optimize-bw | no fast-reroute timers promotion | fast-reroute timers promotion <seconds>

Syntax Description

no

(Optional) Negate a command or set its defaults

fast-reroute

fast-reroute parameters

backup-prot-preempt

Preemption algorithm for backup tunnels

optimize-bw

Reduce bandwidth wastage (default: minimize LSPs preempted)

timers

configure fast-reroute timer

promotion

Configure how often we scan for LSP backup promotion

seconds

seconds between promotions (0 disables promotion.)

Command Mode

  • /exec/configure/te

feature-set

[no] feature-set <fs>

Syntax Description

no

Negate a command or set its defaults

feature-set

Enable feature-set

fs

allow feature-set

Command Mode

  • /exec/configure

feature-set

feature-set <fs>

Syntax Description

feature-set

Enable feature-set

fs

allow feature-set

Command Mode

  • /exec/configure

feature

[no] feature <arg1>

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Feature name

arg1

Enter feature name

Command Mode

  • /exec/configure/rolefeaturegrp

feature bash-shell

[no] feature bash-shell

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

bash-shell

Enable/Disable bash-shell

Command Mode

  • /exec/configure

feature bfd

[no] feature bfd

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

bfd

bfd

Command Mode

  • /exec/configure

feature bgp

[no] feature bgp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

bgp

Enable/Disable Border Gateway Protocol (BGP)

Command Mode

  • /exec/configure

feature container-tracker

[no] feature container-tracker

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

container-tracker

Enable/Disable NXOS Container Tracker

Command Mode

  • /exec/configure

feature eigrp

[no] feature eigrp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

eigrp

Enable/Disable Enhanced Interior Gateway Routing Protocol (EIGRP)

Command Mode

  • /exec/configure

feature evb

[no] feature evb

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

evb

Enable/Disable Edge Virtual Bridge (EVB)

Command Mode

  • /exec/configure

feature evmed

[no] feature evmed

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

evmed

Enable/Disable Generic event detectors

Command Mode

  • /exec/configure

feature fabric forwarding

[no] feature fabric forwarding

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

fabric

Enable/Disable Fabric Services

forwarding

Enable/Disable Fabric Forwarding Protocol: Host Mobility Manager (HMM)

Command Mode

  • /exec/configure

feature icam

[no] feature icam

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

icam

Enable/Disable icam

Command Mode

  • /exec/configure

feature interface-vlan

[no] feature interface-vlan

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

interface-vlan

Enable/Disable interface vlan

Command Mode

  • /exec/configure

feature isis

[no] feature isis

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

isis

Enable/Disable IS-IS Unicast Routing Protocol (IS-IS)

Command Mode

  • /exec/configure

feature lacp

[no] feature lacp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

lacp

Enable/Disable LACP

Command Mode

  • /exec/configure

feature ldap

[no] feature ldap

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ldap

Enable/Disable ldap

Command Mode

  • /exec/configure

feature lldp

[no] feature lldp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

lldp

Enable/Disable LLDP

Command Mode

  • /exec/configure

feature msdp

[no] feature msdp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

msdp

Enable/Disable Multicast Source Discovery Protocol (MSDP)

Command Mode

  • /exec/configure

feature nat

[no] feature nat

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

nat

Enable/Disable NAT

Command Mode

  • /exec/configure

feature ngmvpn

[no] feature ngmvpn

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ngmvpn

Enable/Disable EVPN/MVPN features

Command Mode

  • /exec/configure

feature ntp

[no] feature ntp

Syntax Description

no

(Optional) Negate a command or set its default

feature

Command to enable/disable features

ntp

Enable/Disable NTP

Command Mode

  • /exec/configure

feature nxapi

[no] feature nxapi

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

nxapi

Enable/Disable nxapi

Command Mode

  • /exec/configure

feature nxdb

[no] feature nxdb

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

nxdb

Enable/Disable nxdb

Command Mode

  • /exec/configure

feature nxsdk

[no] feature nxsdk

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

nxsdk

Enable/Disable nxsdk Services

Command Mode

  • /exec/configure

feature ospf

[no] feature ospf

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ospf

Enable/Disable Open Shortest Path First Protocol (OSPF)

Command Mode

  • /exec/configure

feature ospfv3

[no] feature ospfv3

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ospfv3

Enable/Disable Open Shortest Path First Version 3 Protocol (OSPFv3)

Command Mode

  • /exec/configure

feature password encryption aes

[no] feature password encryption aes

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Enable the feature

password

Credential(s) for the user(s)/device(s)

encryption

Strong encryption for credential(s)

aes

Encrypt using AES encryption standard

Command Mode

  • /exec/configure

feature pbr

[no] feature pbr

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

pbr

Enable/Disable Policy Based Routing(PBR)

Command Mode

  • /exec/configure

feature pim

[no] feature pim

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

pim

Enable/Disable Protocol Independent Multicast (PIM)

Command Mode

  • /exec/configure

feature pim6

[no] feature pim6

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

pim6

Enable/Disable Protocol Independent Multicast (PIM) for IPv6

Command Mode

  • /exec/configure

feature poap

[no] feature poap

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

poap

Enable/Disable POAP

Command Mode

  • /exec/configure

feature privilege

[no] feature privilege

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

privilege

Enable/Disable IOS type privilege level support

Command Mode

  • /exec/configure

feature rip

[no] feature rip

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

rip

Enable/Disable Routing Information Protocol (RIP)

Command Mode

  • /exec/configure

feature scheduler

[no] feature scheduler

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

scheduler

Enable/Disable scheduler

Command Mode

  • /exec/configure

feature scp-server

[no] feature scp-server

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

scp-server

Enable/Disable SCP server

Command Mode

  • /exec/configure

feature sftp-server

[no] feature sftp-server

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

sftp-server

Enable/Disable SFTP server

Command Mode

  • /exec/configure

feature ssh

[no] feature ssh

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

ssh

Enable/Disable ssh

Command Mode

  • /exec/configure

feature tacacs

[no] feature tacacs +

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

Command Mode

  • /exec/configure

feature telemetry

[no] feature telemetry

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

telemetry

Enable/Disable Telemetry

Command Mode

  • /exec/configure

feature telnet

[no] feature telnet

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

telnet

Enable/Disable telnet

Command Mode

  • /exec/configure

feature vtp

[no] feature vtp

Syntax Description

no

(Optional) Negate a command or set its defaults

feature

Command to enable/disable features

vtp

Enable/Disable VTP

Command Mode

  • /exec/configure

fec

fec <fec_val> | no fec [ <fec_val> ]

Syntax Description

no

Negate a command or set its defaults

fec

Forwarding error correction

fec_val

Interface FEC options

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-eth-base

fhrp delay minimum

[no] fhrp delay minimum | fhrp delay minimum <delay>

Syntax Description

no

Negate a command or set its defaults

fhrp

FHRP interface configuration commands

delay

Configure FHRP delay

minimum

minimum delay

delay

Seconds to delay

Command Mode

  • /exec/configure/if-eth-any /exec/configure/if-vlan

fhrp delay reload

[no] fhrp delay reload | fhrp delay reload <delay>

Syntax Description

no

Negate a command or set its defaults

fhrp

FHRP interface configuration commands

delay

Configure FHRP delay

reload

reload delay

delay

Seconds to delay

Command Mode

  • /exec/configure/if-eth-any /exec/configure/if-vlan

filesys delete

filesys delete <s0>

Syntax Description

filesys

file system command

delete

delete a file on file system

s0

file name

Command Mode

  • /exec

filter

[no] filter [ subject-name <s0> | altname-email <s1> | altname-upn <s2> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

filter

Configure mapping filter

subject-name

(Optional) Subject name of the certificate

s0

(Optional) Subject name

altname-email

(Optional) Email id as an alternate name

s1

(Optional) Email id

altname-upn

(Optional) User principal name as an alternate name

s2

(Optional) User principal name

Command Mode

  • /exec/configure/certmap-filter

filter out

[ no | default ] { filter-list <fltrlist-name> } { out | in }

Syntax Description

no

(Optional) Negate a command or set its defaults

default

(Optional) Inherit values from a peer template

filter-list

Apply AS-PATH filter-list

fltrlist-name

Name of filter-list

out

Apply policy to outgoing routes

in

Apply policy to incoming routes

Command Mode

  • /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv4 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mdt /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-vpnv6 /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-link-state /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-vpls /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-mvpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-l2vpn-evpn /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv4-label /exec/configure/router-bgp/router-bgp-neighbor/router-bgp-neighbor-af-ipv6-label

find

find <s0>

Syntax Description

find

Find a file below the current directory

s0

Enter the filename prefix to search

Command Mode

  • /exec

fips debug errors debug

[no] fips debug errors { debug-lc-post-on-maint | reset-debug-lc-post-on-maint }

Syntax Description

no

(Optional) Negate a command or set its defaults

fips

Enable/Disable FIPS mode

debug

Introduce errors into FIPS tests

errors

Introduce errors

debug-lc-post-on-maint

Run the switch on debug mode for fips maintenance state

reset-debug-lc-post-on-maint

Reset the mode from debug-lc-post-on-maint

Command Mode

  • /exec/

fips mode enable

[no] fips mode enable

Syntax Description

no

(Optional) Negate a command or set its defaults

fips

Enable/Disable FIPS mode

mode

FIPS mode

enable

Enable/Disable FIPS mode

Command Mode

  • /exec/configure

flow exporter

[no] flow exporter <exportername>

Syntax Description

flow

Enable/Disable NetFlow configuration

exporter

Define a Flow Exporter

exportername

Name of Flow Exporter

Command Mode

  • /exec/configure

flow forward

[no] flow { forward | reverse }

Syntax Description

no

(Optional) Negate a command or set its defaults

flow

Configure ngoam flow

forward

Ngoam forward flow

reverse

Ngoam reverse flow

Command Mode

  • /exec/configure/configngoamprofile

flow monitor

[no] flow monitor <monitorname>

Syntax Description

flow

Enable/Disable NetFlow configuration

monitor

Define a Flow Monitor

monitorname

Name of Flow Monitor

Command Mode

  • /exec/configure

flow record

[no] flow record <recordname>

Syntax Description

flow

Enable/Disable NetFlow configuration

record

Define a Flow Record

recordname

Record name

Command Mode

  • /exec/configure

flow timeout

{ [ no ] flow timeout <time> | no flow timeout }

Syntax Description

flow

Enable/Disable NetFlow configuration

timeout

Define a Flow Timeout

time

Time in seconds (flush-cache-Only)

Command Mode

  • /exec/configure

flowcontrol hardware

[no] flowcontrol hardware

Syntax Description

no

(Optional) Negate a command or set its defaults

flowcontrol

Set flow control

hardware

Set hardware flowcontrol

Command Mode

  • /exec/configure/com1

flowcontrol receive

flowcontrol { receive { <rx_flowctrl> } | send { <tx_flowctrl> } } | no flowcontrol { receive [ { <rx_flowctrl> } ] | send [ { <tx_flowctrl> } ] }

Syntax Description

no

Negate a command or set its defaults

flowcontrol

Configure interface flowcontrol

receive

Receive pause frames

rx_flowctrl

Receive flow control

send

Send pause frames

tx_flowctrl

Send flow control

Command Mode

  • /exec/configure/if-ethernet-all /exec/configure/if-eth-non-member /exec/configure/if-port-channel

flush-routes

[no] flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

flush-routes

Flush routes in RIB upon controlled restart

Command Mode

  • /exec/configure/router-bgp

flush-routes

[no] flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

flush-routes

Flush routes on a non-graceful controlled restart

Command Mode

  • /exec/configure/router-ospf

flush-routes

[no] flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

flush-routes

Flush routes in RIB during restart

Command Mode

  • /exec/configure/router-eigrp

flush-routes

[no] flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

flush-routes

Flush routes on non-graceful controlled restart

Command Mode

  • /exec/configure/router-isis

flush-routes

[no] flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

flush-routes

Flush routes in RIB during restart

Command Mode

  • /exec/configure/router-rip

flush-routes

[no] flush-routes

Syntax Description

no

(Optional) Negate a command or set its defaults

flush-routes

Flush routes on a non-graceful controlled restart

Command Mode

  • /exec/configure/router-ospf3

follow

follow <name> | no follow

Syntax Description

no

Negate a command or set its defaults

follow

Group to be followed

name

master name string to follow

Command Mode

  • /exec/configure/if-eth-any/hsrp_ipv4 /exec/configure/if-eth-any/hsrp_ipv6

forceshut reset-reason

forceshut [ { module <module> | <s0> <santa-cruz-range> | zone <zonenum> <subzone> } ] reset-reason <reset_reason_string>

Syntax Description

forceshut

Force the entire switch to shut down

module

(Optional) Optional. Module to be forceshut(optional arg)

module

(Optional) please enter the module number

s0

(Optional) Power off a specific xbar

santa-cruz-range

(Optional) please enter the xbar number

zone

(Optional) Optional. Zone to be forceshut(optional arg)

zonenum

(Optional) please enter the zone number

subzone

(Optional) please enter the subzone number

reset-reason

Shut down (with reset-reason)

reset_reason_string

please enter reset_reason_string in quotes

Command Mode

  • /exec

format

format <uri1>

Syntax Description

format

Format disks

uri1

destination filesystem path

Command Mode

  • /exec

format bootflash

format bootflash:

Syntax Description

format

Format disks

bootflash:

Format bootflash:

Command Mode

  • /exec

format bootflash check-filesystem

format bootflash: check-filesystem

Syntax Description

format

Format disks

bootflash:

Format bootflash:

check-filesystem

Format bootflash: and fix any errors in file system

Command Mode

  • /exec

format usb1

format usb1:

Syntax Description

format

Format disks

usb1:

Format usb1:

Command Mode

  • /exec

forward

[no] forward

Syntax Description

no

(Optional) Negate a command or set its defaults

forward

Configure paths

Command Mode

  • /exec/configure/mpls_static/ipv4/lsp/inlabel

forwarder preempt

[no] forwarder preempt [ delay minimum <min-delay> ]

Syntax Description

no

(Optional) Negate a command or set its defaults

forwarder

Forwarder Configuration

preempt

Overthrow lower priority designated routers

delay

(Optional) Wait before preempting

minimum

(Optional) Delay at least this long

min-delay

(Optional) Number of seconds for minimum delay

Command Mode

  • /exec/configure/if-eth-any/glbp

forwarding-adjacency

[no] forwarding-adjacency | forwarding-adjacency [ holdtime <msec> ]

Syntax Description

no

Negate a command or set its defaults

forwarding-adjacency

Treat this tunnel as a Forwarding Adjacency

holdtime

(Optional) How long in msecs to wait upon flooding a down Forwarding Adjacency

msec

(Optional) Holdtime on MPLS TE Down

Command Mode

  • /exec/configure/if-te

fragments

[no] fragments <opt_type>

Syntax Description

no

(Optional) Negate a command or set its defaults

opt_type

frag_op_type

Command Mode

  • /exec/configure/ipacl /exec/configure/ipv6acl

frequency

{ { no | default } frequency | frequency <seconds> }

Syntax Description

no

default

Set a command to its defaults

frequency

Frequency of an operation

seconds

Frequency in seconds

Command Mode

  • /exec/configure/ip-sla/udp /exec/configure/ip-sla/jitter /exec/configure/ip-sla/tcp /exec/configure/ip-sla/icmpEcho /exec/configure/ip-sla/dns /exec/configure/ip-sla/fabricPathEcho /exec/configure/ip-sla/http

from to

[no] { { from <frm-list> to <to-val> } | { default { <value> | copy | ignore } } }

Syntax Description

no

(Optional) Negate a command or set its defaults

from

Map values from this

frm-list

Original list of values which are to be mapped

to

Map values to this

to-val

New mapped value

default

map default values

value

default value to be set

copy

Do a default copy

ignore

Ignore any unspecified values

Command Mode

  • /exec/configure/table-map

from to

{ [ no ] { { from <frm-list> to <to-val> } | { default <value> } } } | default copy

Syntax Description

no

(Optional) Negate a command or set its defaults

from

Map values from this

frm-list

Original list of values which are to be mapped

to

Map values to this

to-val

New mapped value

default

map default values

value

default value to be set

copy

Do a default copy

Command Mode

  • /exec/configure/def-tmap