Cisco Nexus 7000 Series OTV Command Reference

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: May 16, 2017

Chapter: F Commands

feature otv

F Commands

feature otv

feature otv

To enable Overlay Transport Virtualization (OTV), use the feature otv command. To return to the default setting, use the no form of this command.

feature otv

no feature otv

Syntax Description

This command has no arguments or keywords.

Command Default

Disabled

Command Modes

Global configuration

Command History

Release	Modification
5.0(3)	This command was introduced.

Usage Guidelines

You must use the feature otv command to enable the OTV functionality. The device does not display any OTV commands until you enable the feature.

This command requires a Transport Services license.

Examples

This example shows how to enable OTV functionality on the device:

switch# configure terminal
switch(config)# feature otv
switch(config)#

Related Commands

Command	Description
show feature	Displays information about the features enabled on the device.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)